Breeding methods of wedding gown orchids

1. Cutting

If it is the use of cuttage propagation, then you can insert the roots of the new buds between five to ten centimeters into the soil, wait until about a week to grow roots, and so on to grow to about 20 days to be able to plant, because the adaptability of the wedding spider is relatively strong, so you only need to put it in a relatively ventilated and cool position.

2. ramets

A method used in more plants, and most of the plants are also used in the way of plant division for reproduction, using the method of plant division to reproduce is to first take the wedding spider from the breeding pot with roots, and then start from the roots, first remove the diseased roots and rotten roots, and then cut some older roots and transplant them.

The above is about how to breed wedding spider orchid introduction, below we take a look at wedding spider orchid in the process of raising what to pay attention to!

The cultivation method of wedding spider orchid

The growth habits of wedding spider

According to the growth area and habits of the wedding spider plant, it can be judged that it prefers environmental conditions such as high temperature and high humidity, avoiding direct sunlight or astigmatism, especially avoiding strong light explosion. In addition, the wedding spider plant also has the habits of intolerance to shade, liking water, liking fat, fearing cold, fearing drought and resisting pruning. Keep that in mind. In addition, for the problem of flowering of wedding spider orchid, if the wedding spider orchid is cultivated, it generally takes seven or eight months to bloom, and the wedding spider orchid generally blooms from December to March of the following year.

The cultivation method of wedding spider orchid

The adaptability of the wedding spider is quite strong, so when maintaining the wedding spider, you only need to control the amount of watering to ensure that there is no accumulated water in the flowerpot. In addition, you should pay attention to avoiding direct sunlight in summer to prevent burns, and enhancing light in winter to avoid freezing damage. If flower friends want to improve the flowering rate of wedding spider, they need to pay special attention to water control problems, and must ensure that the light is appropriate. If the light is insufficient, it will affect the growth of plants and reduce the flowering rate.

Notice of wedding ceremony.

Special attention should be paid to fertilization when breeding wedding spider plants. Wedding spider orchid is more like fertilizer but still need to control fertilization, can not be excessive fertilization, thin fertilizer more. In addition, it is necessary to pay attention to applying fertilizer according to the fertilizer use instructions, and distinguish whether to bury the fertilizer in the soil or spray it on the leaves. In this way, as long as thin fertilizer is applied and fertilizer with corresponding effect is applied, normal maintenance can be done.

How to raise wedding flowers?

Flower Bonsai Network Guide: Today's flower bonsai network to share with you is about the cultivation method of wedding spider orchid, wedding spider orchid how to raise the article, let's take a look.

Wedding spider orchid is a plant that has not been fully recognized by people. It seems that the background of wedding spider orchid is unclear. There is no scientific name, no family, but its beautiful flower shape attracts many flower friends to breed. Then an important question is what are the breeding methods of wedding spider orchid.

The growth habits of wedding spider

According to the growth area and habits of the wedding spider plant, it can be judged that it prefers environmental conditions such as high temperature and high humidity, avoiding direct sunlight or astigmatism, especially avoiding strong light explosion. In addition, the wedding spider plant also has the habits of intolerance to shade, liking water, liking fat, fearing cold, fearing drought and resisting pruning. Keep that in mind. In addition, for the problem of flowering of wedding spider orchid, if the wedding spider orchid is cultivated, it generally takes seven or eight months to bloom, and the wedding spider orchid generally blooms from December to March of the following year.

The cultivation method of wedding spider orchid

The adaptability of the wedding spider is quite strong, so when maintaining the wedding spider, you only need to control the amount of watering to ensure that there is no accumulated water in the flowerpot. In addition, you should pay attention to avoiding direct sunlight in summer to prevent burns, and enhancing light in winter to avoid freezing damage. If flower friends want to improve the flowering rate of wedding spider, they need to pay special attention to water control problems, and must ensure that the light is appropriate. If the light is insufficient, it will affect the growth of plants and reduce the flowering rate.

Wedding spider orchid is said to be a plant from South Korea, because it has white flowers, like the bride wearing a white wedding dress, so it is called wedding spider orchid, of course, there are flower friends say it is like weeds, in fact, from the appearance point of view, it is also Commelina grass.

Wedding spider is suitable for maintenance in high temperature, high humidity, scattered light environment (balcony direct sunlight can not be), avoid direct sunlight, not resistant to shade (easy to grow without flowering), like water and fertilizer, pruning resistance, fear of cold, fear of drought. As for the flowering period of the wedding spider orchid, generally speaking, the wedding spider orchid we cultivate needs to be raised for 7-8 months before flowering. Under normal circumstances, the flowering period of the wedding spider orchid is from December to March of the following year.

In fact, the wedding spider plant is very good to raise, pay attention to the basin do not accumulate water, do not expose to the sun, do not freeze, OK, after all, it is only "grass", the difficulty lies in flowering, if the flower friend wants its flowering, it is best to control the water properly, and give appropriate light, in the absence of light, the wedding spider plant grows well, but the probability of flowering is small or less.

Notice of wedding ceremony.

Special attention should be paid to fertilization when breeding wedding spider plants. Wedding spider orchid is more like fertilizer but still need to control fertilization, can not be excessive fertilization, thin fertilizer more. In addition, it is necessary to pay attention to applying fertilizer according to the fertilizer use instructions, and distinguish whether to bury the fertilizer in the soil or spray it on the leaves. In this way, as long as thin fertilizer is applied and fertilizer with corresponding effect is applied, normal maintenance can be done.

Fertilization method of spider plant

Chlorophytum is a fleshy root, and the root system is very developed. The flowerpot is basically full of roots, so we should pay attention to several points when fertilizing chlorophytum:

1, the amount of fertilizer should not be too large, a little bit of fertilizer can be given, thin fertilizer can be applied more, fertilizer once a week, each time the amount should be less.

2. Apply fertilizer according to the instructions for fertilizer use, bury it in the soil, or mix it with water to water the spider plant.

In fact, to fertilize the spider orchid, we only need to pay attention to one is thin fertilizer more fertilizer, one is to apply the corresponding effect of fertilizer, other flower friends do not need to worry, according to the fertilizer use instructions can be assured of fertilization.

How does the wedding dress grow?

Wedding spider is a flower plant native to South Korea, which is named wedding spider because of its white flowers like brides wearing wedding dresses, and has great beauty and ornamental value, so friends who want to cultivate wedding spider will inevitably ask about its breeding method. Wedding spider plant has strong adaptability and high survival rate in terms of its habits. It generally adopts three kinds of cuttage propagation, ramet propagation and seeding propagation.

Cuttage propagation of spider plant

The specific steps of cutting propagation include first taking a stolon with a new bud and inserting it into the soil for 5 to 10 cm, and then waiting for it to take root normally for about a week, during which time normal care and management can be done. Wait until more than 20 days can be transplanted on the pot, then poured into water placed in the shade can be cultured.

RAPID PROPAGATION OF PELLOPIDAE

The specific steps of carrying out plant division propagation of the bridal spider plant include: firstly, lifting the whole plant out of the pot, removing the old soil and dead roots on the plant, cutting the root, ensuring that three stems are left on the cut branches at this time, and then transplanting the plants into the pot for cultivation. The second method of plant division is to cut the clustered stems and leaves on the stolon of the wedding spider, that is, the plant larvae with leaves and aerial roots, and then directly cultivate them in flower pots.

Seed propagation of wedding spider

The seed propagation of wedding spider is best carried out in March of each year. Lingyun wedding dress in sowing must pay attention not to cover the soil too thick, generally 0.5cm can be. After sowing, it should be maintained and managed at room temperature of 15 ° C. In this way, it will germinate within two weeks, and then wait until the plants are mature before transplanting and cultivation.

The Role of Chlorophytum

Chlorophytum is not only shaped like orchid, green all the year round, but also has a strong ability to absorb pollution,"home plant chlorophytum, dirty ghost fear", Minnan, Taiwan and other places people praise chlorophytum like this. Chlorophytum is the best plant for purifying indoor air, which has been approved by scientists.

American environmental expert Bill Warwell has conducted experiments, he put the spider plant in a special plexiglass container, give good light, and then fill the polluted room air, after a period of time to measure the air absorbed by the spider plant composition, the results found that the harmful gases in the container are few, its efficiency almost exceeds the air filter.

The experiment proved that chlorophytum can absorb and purify all harmful gases in the experimental container within 24 hours. As long as a pot of hanging orchid is placed in the dormitory, harmful gases such as carbon monoxide and nitrogen peroxide emitted by indoor appliances, stoves, plastic products and paints can be absorbed and transported to the roots within one day, and then decomposed into harmless substances by microorganisms in the soil, which are absorbed as nutrients.

Chlorophytum in its own metabolism, but also carcinogenic formaldehyde in the air into sugar and amino acids and other substances. And it can decompose benzene emitted by copiers and printers, and can also "swallow" nicotine and so on. Therefore, in a room of about 10 square meters, as long as there is a pot of hanging orchid, it is equivalent to installing an air purifier, which is enough to offset the negative effects of harmful gases.

Scientists also put pots of chlorophyllin in a sealed environment similar to that of the space shuttle capsule. After 12 hours, they measured that harmful gases such as carbon monoxide, nitrous oxide and formaldehyde in the cabin had been reduced by 85%. Xi'an Botanical Garden researchers said that in recent years, more and more people have chosen spider plants as family potted plants, and its ability to absorb pollutants has been recognized by most people.

In addition, spider plants are often used indoors, especially after decoration, indoor "negative ion" purifiers, which are believed to have significant effects on reducing the concentration of harmful substances such as formaldehyde and benzene.