The method of making bonsai of June snow

time

June snow plants are generally selected for split propagation in March and cutting propagation from April to October.

Basin soil

June snow basin soil requires the selection of sandy loam which is rich in organic matter, loose and fertile, and has good drainage and permeability. Flowerpots can choose slightly darker ones to contrast with June snow to increase ornamental.

Light

June snow likes a sunny, warm, humid and well-ventilated environment.

Temperature

June snow is tenacious and not afraid of cold, but it should keep room temperature about 5-12 ℃ in winter.

Watering

Although the drainage of June snow is better, but we should also pay attention to watering not too much, keep the basin soil moist, if the basin soil stagnant water can easily lead to rotting roots. In summer high temperatures can be sprayed with water on the leaves or on the nearby ground to maintain the relative humidity of the air.

So, do you know what other types of snow bonsai models are available in June?

The method of making bonsai of June snow

The types of snow bonsai in June

The branches of June snow are soft and tough and can withstand banding, so the bonsai style is generally divided into straight dry type, Qiu qu type, cliff type and so on.

If the basin is relatively high, it can be cultivated into a cliff type. The cliff type is divided into semi-suspension, full suspension and small suspension according to the degree of inclination.

Half-hanging means that the trunk is basically across the vent, the fully suspended trunk should hang down the basin mouth 45 degrees, and the small hanging trunk generally hangs about 30 degrees 40 degrees.

The production method of snow bonsai in June

June snow was propagated separately in March and cuttage propagation was carried out from April to October.

The use of "wood cutting dry method" processing, can also be used "cutting and binding method" processing. Banding is usually carried out from semi-deciduous leaves in winter to before sprouting in spring, the trunk and branches of June snow are tied with wire, and the branchlets are trimmed and shaped.

Transplant the pot from February to March, choose the purple sand basin or glaze basin with darker color, the depth of the basin is lighter, in contrast with the flower color, the basin soil needs sandy loam soil rich in organic matter, loose and fertile, and good drainage and air permeability.

Turn the basin every 1-2 years, in spring February-March or late autumn, throw away all the old soil, properly trim the roots, can be combined with turning the basin to lift the roots to form hanging roots to improve the ornamental value.

Key points for the maintenance of snow bonsai in June

After semi-deciduous leaves in winter every year, before sprouting in the following spring, plastic pruning is carried out, cutting off short and long branches, overgrown branches, thin and weak branches, and branches of diseases and insect pests. During the growing period, coring, sprouting, branching, etc., are carried out to maintain a beautiful shape.

The snow branches in June are relatively soft and suitable for banding. In the early stage, it is necessary to tie up the skeleton, fix the trunk branches, and raise them to thicken.

The root system of June snow is well developed, hanging roots and exposed claws, the root and stone distribution in the maintenance stage is very important, the design scheme and stone selection must be careful.

The management of big fertilizer and big water during the period of pile maintenance shall be controlled according to the specific conditions during the forming period.

Do not water less, June snow is very sensitive to water, if too little watering, there may be the consequences of dead branches and piles.

Production method of snow bonsai in June maintenance method of snow bonsai in June

June snow branches are soft and tough, can withstand banding, and are very suitable for viewing as bonsai. Many people have snow bonsai in June at home, which is placed on the coffee table, desk or windowsill in the living room, making the whole room seem fresh and elegant. The following editor will introduce the method of making snow bonsai in June and enjoy the pictures of snow bonsai in June.

Production method of snow bonsai in June

Source of June snow bonsai plants: June snow plants suitable for bonsai can be obtained by branching the mother plant in March or by cutting from April to October.

June snow bonsai basin soil: June snow basin soil is required to be rich in organic matter, loose and fertile sand loam with good drainage and permeability. Flowerpots can choose lighter purple sand pots or glaze pots, and the basin color should be slightly darker, which can be contrasted with June snow to increase ornamental. The snow basin in June should be held from February to March.

June snow bonsai light and temperature requirements: June snow likes sunny, warm and humid, well-ventilated environment. Sunshade should be 50% Mel 70% in early autumn, and room temperature should be kept at 5-12 ℃ in winter in the north.

June snow bonsai water and fertilizer requirements: in June snow growing season should be often watered, summer every day to June snow leaf spray 1-2 times, increase air humidity. Reduce the watering times in winter and keep the basin soil moist and slightly dry. June snow likes fertilizer, but each fertilization should not be too thick. It is necessary to apply 0.5% phosphate and potassium fertilizer solution to June snow 2-3 times in April-May every year. Applying dilute organic fertilizer 1-2 times in Ladong, it is not suitable to apply fertilizer in other seasons.

Maintenance methods of snow bonsai in June

Turning basin pruning: snow bonsai in June needs to be turned once every 1-2 years, in spring from February to March or during late autumn. First of all, you need to remove all the old soil from June snow and trim the roots properly. It can be combined with turning the basin to lift the root to form a hanging root to improve the ornamental value.

After the half-fallen leaves fall in June every winter to the sprouting of the following spring, you are selected for plastic pruning, pruning long and overgrown branches, thinning dense thin and weak branches, cutting off branches of diseases and insect pests and other messy branches that affect ornamental purposes. During the growing period of June snow, heart-picking, sprouting and branching can be carried out at the right time, so as to maintain the beautiful shape of June snow bonsai.

Pest control: there are few diseases and insect pests in snow bonsai in June, but aphids and snails occur occasionally. Aphids can be sprayed with wind oil essence diluted 500,600 times, and snails can be sprayed with 58% wind and lightning excited EC 1500 times. Sometimes you will get root rot. At the beginning of the disease, use 12% oleic acid copper EC 600-1000 times, or 50% root rot 800 times solution to control the root and foliar spray, spray (irrigation) once every 3-5 days, continuous spray (irrigation) 3-4 times.

The production method of June snow bonsai is introduced here, and the editor also introduces the maintenance methods of June snow bonsai, hoping to help you all. The snow bonsai in June is placed at home, which not only brings infinite beauty to our home, but also brings us fresh and elegant fragrance.