MySheen

Matters needing attention for smooth sailing in water culture

Published: 2024-11-10 Author: mysheen
Last Updated: 2024/11/10, 1. The light is plain sailing and likes the sun, but it is more shady, but it avoids strong light, so it can be placed indoors with bright scattered light all the year round. two。 The water in the water bottle should not all pass through the root system of the plant, and the water level should be about 2/3 of the root length. The water temperature should be kept close to that of the room.

1. Light

Plain sailing like the sun, but also more shady, but avoid strong light, so it can be placed indoors with bright scattered light all the year round.

two。 Moisture content

The water in the bottle should not all pass through the root system of the plant, and the water level should be about 2/3 of the root length. The water temperature should be kept close to that of the room, and it is best to precipitate the tap water for a day before using it.

3. Change water

You can change the water once a week in summer and once a month in winter. You don't have to change water too frequently. Pour in a few drops of special nutrient solution for hydroponic flowers when changing water.

4. Cleaning

Clean the plant roots when changing water, cut off the rotten roots in time when you find rotten roots, and then wash the bottle.

Smooth sailing water culture methods smooth sailing water culture matters needing attention

Plain sailing, also known as taro, bract taro, etc., is one of the most important ornamental flowers in the world. Hydroponic smooth sailing can not only see its white and tender roots, but also see the lovely little fish that swim among the roots, which is really pleasing to the eye. Let's take a look at the smooth sailing hydroponic culture method!

Smooth sailing, hydroponic culture method

1. Wash the glass bottle clean, the beautiful pebbles clean, put the pebbles on the small filter, this kind of equipment can be bought from the florist or utensils store, fill the glass bottle with water, put smooth sailing into the bottle, be careful to prevent the leaves from being rubbed off.

2. Because smooth sailing is afraid of strong light exposure and likes water, it is necessary to spray some water on its leaves every other day in summer.

3. when some roots grow smoothly in the glass bottle, check to see if there is any rot in the roots, and if so, remove them in time.

4. Hydroponic culture is plain sailing. If the leaves are yellow, they can continue to be cultured in the water. If the yellow is serious, they should be transplanted to the soil for breeding.

Matters needing attention in plain sailing and hydroponics

1. The water is hot every 15-20 days, it is cold for about a month, and the water level reaches 3/4 of the root system. When changing water, pour in a few drops of special nutrient solution for hydroponic flowers.

2. you can scatter light at ordinary times, avoid light in summer and avoid direct light.

3. Use foliage plant nutrient solution.

4. Properly spray water on the leaf surface to increase air humidity. If tap water is used, it should be connected in advance and placed in the air for more than one day to fully dissolve oxygen and release chlorine. When changing water, clean the root mucus and cut off rotten roots and scorched leaves.

5. Choose a larger one at the bottom of the flowerpot, which is easy to survive.

The hydroponic culture is smooth and the leaves turn yellow.

1. Air dryness: smooth sailing requires higher growth humidity. If the air is too dry, it can cause leaf wilting, which can be solved by strengthening water spraying or environmental ground spraying, or covered with transparent plastic bags. however, when the light is good, it is necessary to have a little ventilation or open a mouthful of ventilation on the top of the plastic bag, otherwise the temperature in the bag will rise sharply.

2, nutrition deficiency: we all know that in the early stage of plant growth, nutrition is absorbed from the soil. If it takes a long time, the nutrition in the soil will be reduced, resulting in malnutrition, fat, freezing injury, and leaves are easy to be yellow and pointed. At this time, the nutrient solution should be replenished in time.

3, improper lighting: plain sailing in winter and early spring need better light, do not shade, and gradually shade when the light is getting stronger, if appreciated in the shade, do not directly expose to the sun, otherwise there will be discomfort due to rapid changes in the environment, such as wilting, yellow leaves, and even death, should be placed in the indoor with bright scattered light for breeding.

4. Temperature discomfort: generally, it is not easy to occur. When the temperature is lower than 5 ℃ or higher than 35 ℃, it is easy to yellowing leaves. Giving sufficient light conditions is not only conducive to thick green leaves, but also conducive to overwintering.

5, the occurrence of insect pests: if there are mite pests, the smooth sailing leaves show bad symptoms such as wilting, gloss desalination, yellow blight and so on, which can be controlled by spraying special mites, such as triclofenac, Nisolan, pyridaben and so on.

Introduction of plain sailing hydroponics and matters needing attention

Plain sailing aquaculture methods:

Find a large transparent glass bottle, smooth the root system smoothly and carefully put it into the vase, do not touch the leaves, or damage the roots, in order to make smooth sailing upright, you can fix the mouth of the bottle with stones or pebbles, pay attention to clean the pebbles; then pour into the bottle body 2ppm 3 moisture, pay attention to stretch the root system.

The cultivation and planting of smooth sailing must have a suitable environmental temperature: the growth temperature of hydroponic plants is 5 ℃-30 ℃, and they can grow normally in this range.

Smooth sailing, cultivation and planting must have appropriate light: the light of hydroponic plants is mainly scattered light, not necessarily exposed to the sun. Try to avoid direct sunlight in summer.

Plain sailing and smooth water culture and planting must often change water and clean the roots of flowers: hydroponic plants change water every 7 days in summer and 10-15 days in winter. Add a few drops of special nutrient solution for flowers and plants (the concentration of the nutrient solution can be prepared according to the instructions). The utensils used to cultivate hydroponic plants are easy to grow moss, affect the ornamental of the roots, and consume oxygen in the water. When changing water, you should first wash away the mucus from the flower roots with clean water, and cut off the old and rotten roots. And wash the moss on the utensils and roots. For each change of water, the interface of the water should be 1-2-2-3 of submerged roots, and the rest of the roots should be exposed to the air.

Matters needing attention in plain sailing hydroponics:

Should pay attention to timely observation of smooth water root growth, to see if there is any root rot, if there is a timely removal, and timely change of water to ensure smooth and healthy growth.

Smooth sailing cultivation and planting must pay attention to moisturizing and spraying foliar fertilizer: in order to prevent the occurrence of leaf dryness, foliar moisturizing should be sprayed with clear water during daily nursing, preferably once a week, which can not only provide nutrition for leaves and increase foliar luster, but also achieve the purpose of resisting low temperature in winter.

If the leaves that grow smoothly in water are yellow, if the clearing and tonifying is serious, they are only slightly yellowed, and they can continue to be cultured in the water; if they are badly yellowed, they should be transplanted to the soil for breeding.

The above is the succulent garden to provide you with smooth sailing specific methods and matters needing attention, I hope this article can bring some help!

 
0