Hydroponic culture of Brazilian wood

1. Nutrient solution

If you want to carry out the hydroponic culture of Brazilian wood, the nutrient solution is very important. It is recommended to prepare an acidic nutrient solution containing nitrate nitrogen. Immediately after planting the Brazilian wood, it should be used with the diluted nutrient solution to pour the nutrient solution thoroughly. The exudate nutrient solution can be seen at the bottom of the basin, and this state is thoroughly poured out. In addition, it is suggested that you can spray some potassium dihydrogen phosphate aqueous solution on the leaves of the seedlings to help the growth of the seedlings. In addition, timely replenishment of nutrient solution and water is also important to prevent excessive salt content in the substrate. When there is white frost on the ceramsite surface, it is recommended to clean the salt in the cultivation substrate.

2. Lighting

The seedlings that have just been planted are placed in a darker place to slow down the seedlings, and then when the seedlings grow normally, they can be moved to a place with plenty of light. In addition, Brazilian wood likes the sun, in addition to summer, other seasons can maintain sufficient light, summer should be prepared for shade to prevent Brazilian wood from direct sunlight. Winter time should pay more attention to sufficient light, in addition, Brazilian wood likes warmth, winter should ensure that the room temperature is above 10 degrees Celsius.

3. Moisture

Brazilian wood in the indoor air is too dry, there will be leaf crimping phenomenon. When this phenomenon occurs, you can choose to spray water around or put a basin to increase the humidity of the air. In addition, when the plant is too high, the trunk at the top should be trimmed off in time, so as to sprout new branches and buds, which is more suitable for the appearance of Brazilian wood, easy for people to appreciate and watch.

The above is about the hydroponic culture method of Brazilian wood, let's take a look at the matters needing attention in the cultivation of Brazilian wood.

Can Brazilian wood be hydroponically cultured? methods and techniques of hydroponic culture of Brazilian wood

Brazilian wood is tall and straight, vigorous and simple, with green leaves and soft free and easy. it is a very popular indoor foliage plant in recent years. Potted decoration halls, rooms, and both sides of the population will give people a warm, comfortable feeling and unique amorous feelings. Can Brazilian wood be cultivated in soilless culture? what do we need to pay attention to in soilless cultivation? today, the editor will introduce to you the methods and techniques of soilless cultivation (hydroponics).

Brazilian wood has a strong adaptability to light. In the north, it can be continuously placed and watched for more than a month in the dark room, and can be placed for long-term viewing in the bright room. Like high temperature, high humidity and well-ventilated environment, prefer light and shade, but afraid of hot sun, avoid dryness, drought, loose and well-drained sandy soil. The suitable temperature for growth is from 20 ℃ to 28 ℃. The leaves should be protected from withering and drying under 13 ℃ in winter, and the overwintering temperature is 5 ℃.

Methods and techniques of water culture of Brazilian wood:

For the nutrient solution of Brazilian wood hydroponics, the acidic nutrient solution rich in nitrate nitrogen is the best, such as foliage plant nutrient solution, which can generally meet the requirements. The formula is shown in Table 11mur9.

In recent years, the all-element organic compound fertilizer and nutrient solution introduced in the market are also good nutrient sources for soilless cultivation. Immediately after the Brazilian wood seedlings were planted, the nutrient solution was diluted by 50 times and 100 times, and the nutrient solution should be poured thoroughly for the first time until the exudate was seen in the basin bottom tray. At the same time, 0.1% potassium dihydrogen phosphate aqueous solution was sprayed on the leaves of the seedlings. The seedlings were placed in semi-shade for about 1 week, and then gradually moved to normal management under sufficient light. Usually replenish fluid with nutrient solution diluted 5 to 10 times, large basin of 30-35cm, once every semimonthly, 500ml each time; water supplement on weekdays, subject to exudate at the bottom of the basin. When using cultivation substrates with larger particles such as pottery materials, it is more timely to replenish water. If it is found that there is a "white frost"-like substance on the ceramsite surface, it indicates that the salt in the substrate is too high, and it is necessary to clean the salt in the cultivation substrate. In the alkaline areas of water and soil, rinse the substrate 2Mel repeatedly with 10 times diluted rice vinegar, then pour it out together with the nutrient solution, and re-irrigate the newly prepared nutrient solution diluted 2 times. When selecting the mixed cultivation substrate of peat and perlite, because this substrate has a strong acid-base buffer capacity, it is only necessary to pour the nutrient solution according to the normal method.

Brazilian wood should pay attention to prevent direct sunlight around noon in summer. Try to keep warm in winter, generally not less than 10C, it is best to maintain more than 15C, as far as possible to ensure sufficient light, in order to promote its robust growth. If the indoor air is too dry, it will often cause the tip and edge of the leaf to turn yellow, curl and wither, affecting the ornamental. Therefore, it is necessary to spray water frequently during the growth period to avoid the acute dehydration and dry tip of the leaf. If the plant is too high or the lower leaves fall off, the top trunk can be cut off, and the buds below the cut will sprout new branches and leaves, keeping the plant medium height and plump and beautiful.

The above is the introduction of Brazilian wood hydroponics, Brazilian hydroponics methods and techniques. I hope the editor's introduction can be used in hydroponics in the future. At the same time, I also hope that you can cultivate vibrant Brazilian wood.

Can Brazilian wood be cultured in water? introduction to the method of hydroponic culture of Brazilian wood

Brazilian wood is an evergreen tree of Liliaceae, and it is a very popular green plant, and more and more flower lovers want to cultivate Brazilian wood in water, so next, the editor will introduce whether Brazilian wood can be cultured in water and the method of hydroponic culture of Brazilian wood.

Introduction of Brazilian wood

Brazilian wood is an evergreen tree of Liliaceae. The height is more than 6 meters, the pot plant is 50 cm ~ 150 cm high, branched; the leaf cluster is born at the top of the stem, 40 cm ~ 90 cm long, 6 cm ~ 10 cm wide, curved and arched, bright green and shiny. Flowers small, inconspicuous, fragrant. It is a famous new generation of indoor foliage plants. The plant is graceful, regular and slightly shady. Like high temperature, below 13 ℃, the plant dormancy and stop growing. Prefer loose, well-drained soil; potted with rotten leaf soil or peat soil. Cutting propagation; a large number of cuttings are imported from abroad. The requirement of cutting temperature is higher. Like half-overcast sunshine and plenty of fertilizer. Common cultivated plants of the same genus are: Delilong blood tree, Fugui bamboo, silver star dragon blood tree and dragon blood tree and so on.

Can Brazilian wood be hydroponically cultivated?

Many flower lovers have been hydroponically cultivated Brazilian wood, proving that Brazilian wood can be hydroponically cultivated.

Brazilian wood is tall and straight, vigorous and simple, with green leaves and soft free and easy. it is a very popular indoor foliage plant in recent years. Potted decoration halls, bedrooms, floor population on both sides, will give people a warm, comfortable feeling, do not have amorous feelings. Pay attention to the nutrient solution when hydroponic Brazilian wood is cultivated, and pay attention to light and moisture at ordinary times. Next, the editor will talk specifically about the hydroponic culture method of Brazilian wood.

Hydroponic culture method of Brazilian wood

1. Nutrient solution

The nutrient solution of Brazilian wood hydroponics is better than the acidic nutrient solution rich in nitrate nitrogen, such as foliage plant nutrient solution, which can generally meet the requirements.

In recent years, the all-element organic compound fertilizer and nutrient solution introduced in the market are also good nutrient sources for soilless cultivation. Immediately after the Brazilian wood seedlings were planted, the nutrient solution was diluted by 50 times and 100 times, and the nutrient solution should be poured thoroughly for the first time until the exudate was seen in the basin bottom tray. At the same time, 0.1% potassium dihydrogen phosphate aqueous solution was sprayed on the leaves of the seedlings. The seedlings were placed in semi-shade for about 1 week, and then gradually moved to normal management under sufficient light.

Usually replenish fluid with nutrient solution diluted 5 to 10 times, large basin of 30-35cm, once every semimonthly, 500ml each time; water supplement on weekdays, subject to exudate at the bottom of the basin.

When using cultivation substrates with larger particles such as pottery materials, it is more timely to replenish water. If it is found that there is a "white frost"-like substance on the ceramsite surface, it indicates that the salt in the substrate is too high, and it is necessary to clean the salt in the cultivation substrate. In the alkaline areas of water and soil, rinse the substrate 2Mel repeatedly with 10 times diluted rice vinegar, then pour it out together with the nutrient solution, and re-irrigate the newly prepared nutrient solution diluted 2 times. When selecting the mixed cultivation substrate of peat and perlite, because this substrate has a strong acid-base buffer capacity, it is only necessary to pour the nutrient solution according to the normal method.

2. Lighting

Brazilian wood should pay attention to prevent direct sunlight around noon in summer. Try to keep warm in winter, generally not less than 10C, it is best to maintain more than 15C, as far as possible to ensure sufficient light, in order to promote its robust growth.

3. Moisture

If the indoor air is too dry, it will often cause the tip and edge of the leaf to turn yellow, curl and wither, affecting the ornamental. Therefore, it is necessary to spray water frequently during the growth period to avoid the acute dehydration and dry tip of the leaf. If the plant is too high or the lower leaves fall off, the top trunk can be cut off, and the buds below the cut will sprout new branches and leaves, keeping the plant medium height and plump and beautiful.

The above is the editor's introduction about whether Brazilian wood can be hydroponically cultured and the hydroponic method of Brazilian wood. I hope the editor's introduction can be used in hydroponics in the future. At the same time, I also hope that you can cultivate vibrant Brazilian wood.