Cutting Propagation techniques of Pelargonium
1. It is best to choose an annual, disease-free, well-developed shoot with a length of about 8 cm as cuttings, cut into a horseshoe shape with a knife 0.2 cm below the node, dry the wound first and then insert it, otherwise it is easy to rot, and the incision can also be dipped in a little rooting powder to promote rooting.
2. Cut off the lower leaves of the cuttings and keep 1-2 top leaves; when cutting, first cut a small hole in the basin soil with fine bamboo, then insert the ear and press it tightly with the soil; place it in a cool place after cutting, avoid bright light, water once, do not accumulate water, keep the soil moist, and normally take root in about half a month.
3. Geraniums should not be overwatered. If the roots of geraniums are found to fester, it may be due to overwatering and muggy weather. The frequency of watering should be controlled in every three or two days watering, each watering to a large amount of water, to ensure thorough watering.
After understanding the cutting propagation and propagation skills of geranium, let's take a look at the medicinal value of geranium.
When is the suitable time for geranium cutting? What are the techniques of cutting propagation of geraniums?
Geraniums like warm, humid, sunny places and are afraid of high temperatures, especially in summer, which will grow very slowly if there is not enough light. Do you know all about its breeding techniques? Today I'm going to take you to find out what is the right time for cutting of geranium and how it propagates.
The period of time during which geraniums are suitable for cutting:
The cutting time of pelargonium should be from April to May or August to September, and the specific cutting time should be determined according to the local suitable temperature (18-20 ℃). If the cultivated soil is loose and drained, it is best to choose a mixture of sand, perlite, rotten leaf soil, or medium-coarse river sand, mature soil or expanded perlite, all of which should be sterilized by hot sun exposure.
Techniques for cutting propagation of pelargonium:
Generally speaking, cuttage propagation in pot is the most practical method for family flower cultivation.
Geranium cuttage can be combined with spring and autumn pruning, selecting an annual healthy shoot without diseases and insect pests as cuttings, about 8 cm long, cut into horseshoe shape with a knife at 0.2 cm below the node, dry the wound first and then insert it, otherwise it is easy to rot, and the incision can also be dipped in a little rooting powder to promote rooting.
Cut off the lower leaves of the cuttings, retain 1-2 top leaves, if the leaves are large, you can also cut off 1 big 3 or 1 2 to reduce water evaporation; when cutting, first insert a small hole in the basin soil with fine bamboo, then insert the ear, press tightly with your fingers, so that it is closely connected with the soil; place it in a cool place after cutting, avoid bright light, water once, do not accumulate water, and keep moist.
Under the condition of suitable temperature, it can take root in about half a month; when the seedling grows to 15 cm, carry out coring treatment to promote lateral branches. at the same time, we should pay attention to irrigating thin nitrogen, phosphorus, potassium compound liquid fertilizer, or rotten thin cake fertilizer and other organic fertilizer to make the plant strong and strong. It can blossom in the winter of the same year or the spring of the next year.
That's all I know today about when geraniums are suitable for cutting, reproduction and cutting skills. I hope it will be helpful for you to read this article. I want to know more about geranium culture. please continue to follow our succulent flower beds, we will provide you with more related content!
Can geranium be cut with water? cutting method and time of geranium
Geranium, also known as stone red, sunset red, hydrangea, sunflower, into the red and so on, belongs to the family Niu Niu seedlings, it has more than 230 kinds of perennial fleshy in the world, and sub-shrubs or shrubs. Geraniums are mainly produced in southern Africa and are now grown in all parts of the world. Its old plant is semi-lignified, while the young plant is a succulent herb, which is used as a flower decoration plant in the West. It often appears in continental Europe, as well as in Germany, Austria and other countries. It is generally used to decorate the windowsill. It has a very good effect. Next, let's take a look at whether geranium can be cut with water, as well as the method and time of geranium cutting. [morphological characteristics of geranium] Pelargonium is a perennial herb, its height is generally 30-60cm, and the stem is very tall and straight, the base is woody, the upper part is fleshy, multi-branched or unbranched, and the nodes are very obvious. The leaves are alternate, the stipules are triangular or reniform, the length of the petiole is 7-15mm, the length of the petiole is 3-10cm, the growth of pilose or glandular hairs, and the shape of the leaf is rounded. Inflorescences are umbrella-shaped leaf axils, flowers are very colorful when in full bloom, the total pedicel is growing on the leaves, the length of the pedicel is 3-4mm, it is erect, the petals are pink, white, red, orange and so on, the flower color is very rich. Its florescence is usually from May to July, while its fruiting period is from June to September. [growth habits of geranium] the geranium likes to grow in a sunny environment, it likes to grow in a warm winter and cool summer climate, and the suitable temperature in winter is 10-15 degrees Celsius, while at night the temperature is suitable at 8 degrees Celsius, so that it can blossom normally. The geranium is suitable for growing at a temperature of 15-20 degrees Celsius. It likes to grow in a dry climate and is moist. It should be watered in winter and keep it dry and wet. If the soil is moist, the texture of the stem will be very tender, which is not conducive to flowering or new branches blooming. If the soil is moist for a long time, it will cause the plant to grow too much. Generally, the growing part of the flower branch is moved up, and the leaves are gradually yellow, and then fall off slowly. It should be cultured in a sunny environment in winter, if the lack of light will cause the stem leaves to grow excessively, its pedicel will be relatively soft, and the inflorescence will be poorly developed, the flowering will not be bad, and the flowers will taste bitter early. Geraniums do not like to grow in too fertile soil, otherwise it will cause adverse flowering, thus affecting the ornamental value. [cutting method and time of geranium] 1. Geranium cutting method: the cutting season of geranium is usually carried out from March to June in spring, so it is safe to spend the summer. Geraniums grow very fast when they are not hot or cold. In cutting geranium, generally choose fine yellow sand to culture, it is mainly the use of water, and then put a layer of fine sand on it, which is very conducive to water conservation. Choose cuttings before cutting geraniums and choose healthier cutting fields. Generally, there will be 3-4 branches at the top, then cut obliquely from the last leaf node, trim the cut a little bit, and electricity part of the leaves. This can check the evaporation and consumption of water. two。 Geranium cutting time: the cutting time of geranium is usually when the cuttings are trimmed, do not proceed immediately, you need to put the cuttings in a cool place for a few hours, and then you can cut them. After cutting, use tools to press the soil a little bit, and then use a water spray container to spray. The season of cutting is generally from March to June, and the safer the summer is when cutting is from April to May. [can geranium be cut with water?] the geranium is a kind of plant with very good ornamental value, and its reproductive ability is also very strong. It can grow as long as it needs some water or soil. The main cutting methods used are soil cutting and water cutting. Generally, the survival rate of water cutting is much higher than that of soil cutting. And the ornamental value of water geranium is much better than soil planting, most people first water insertion, and then soil insertion, this stage is the geranium needs a process of adaptation. Therefore, the fastest day can be inserted with water, and the way of water insertion is very simple and convenient.
More related information what does tulip stand for? banyan tree picture of banyan tree planting technology of water spinach
- Prev
Diseases and insect pests of Lotus and their Control methods
1. Black spot: irregular brown disease spots appear on the leaf surface in the early stage, with slight wheel lines, and in the later stage, there are dark black mildew on the disease spots, often several disease spots are linked together to form large disease spots, and in severe cases, the whole plant dies.
- Next
How to raise flowers when they bloom
Because of the limitation of temperature and humidity, under normal circumstances, only 2-3 leaves can grow in a year, so the flower bud will grow in the middle of the two leaves. After flower bud formation, temperature control between 18-20℃, about 3-4 months can bloom. 2. Flower stem extraction
Related
- Fuxing push coffee new agricultural production and marketing class: lack of small-scale processing plants
- Jujube rice field leisure farm deep ploughing Yilan for five years to create a space for organic food and play
- Nongyu Farm-A trial of organic papaya for brave women with advanced technology
- Four points for attention in the prevention and control of diseases and insect pests of edible fungi
- How to add nutrient solution to Edible Fungi
- Is there any good way to control edible fungus mites?
- Open Inoculation Technology of Edible Fungi
- Is there any clever way to use fertilizer for edible fungus in winter?
- What agents are used to kill the pathogens of edible fungi in the mushroom shed?
- Rapid drying of Edible Fungi