Cuttage method of Polygonum cuspidatum

Cut the blade

Break a few leaves from the healthy tiger skin orchid of the branches and leaves. Choose fresh leaves without damage. It can be a whole piece or a leaf can be cut into a section of six or seven centimeters. Leave the collected leaves in a cool place for 24 hours and wait for the wound to dry.

Cuttage

Prepare the soil mixed with sand, to choose breathable, soft soil is better. (you don't have to prepare a separate pot, but you can choose a flowerpot with a large gap.) insert the prepared leaves into the soil at a depth of 3 cm to 4 cm.

Maintenance after cuttage of Phellodendron chinense

Maintenance in the shade

Put the cuttage tiger skin orchid in a cool place, keep it ventilated and keep the basin soil moist during the period. Do not water too much, or be drenched by Rain Water, otherwise the cutting leaves are easy to rot.

Take root

Cuttage rooting of tiger skin orchid is a long process, and it takes a month to take root, so we need to wait patiently. After 1-2 months of rooting, many small buds will appear and seedlings will gradually grow.

In short, it takes half a year for Tiger Pilan to grow seedlings from cuttage to seedling. We need to wait patiently and don't give up without moving.

[Tiger skin orchid cutting] cutting methods and matters needing attention

Cuttage preparation of Tiger Pilan 1. Tool preparation

Prepare potted soil, watering pots and various gardening tools before cutting. Of course, we should also prepare a pot of tiger skin orchid with strong growth.

2. Prepare the plant

Before cutting, we should strengthen the management of the mother plant, increase watering appropriately, keep the soil moist, and apply a little liquid fertilizer to ensure the sturdy mother plant, which is more conducive to the survival of cuttings.

Cuttage method of Polygonum cuspidatum

1. Cutting leaves

Cut the branches and leaves of tiger skin orchid and break a few leaves from the healthy tiger skin orchid. Choose fresh leaves without damage. It can be a whole piece, or you can cut a leaf into a section of six or seven centimeters. Leave the collected leaves in a cool place for 24 hours and wait for the wound to dry.

2. Prepare tiger skin orchid cuttage

The choice of soil perlite, vermiculite, pure sand and even garden soil can be cut, to choose breathable, soft soil is better. Insert the prepared leaves into the soil at a depth of 3 cm to 4 cm.

3. Ventilation matters

Put it in an astigmatic and ventilated place and spray water to maintain humidity every day. After a period of time will take root and sprout, and spray new high-fat membrane can prevent bacteria infection, as long as the leaves are not soft, there is hope, do not worry.

Matters needing attention after cuttage

Put the cuttage tiger skin orchid in a cool place, keep it ventilated and keep the basin soil moist during the period. Do not water too much, or be drenched by Rain Water, otherwise the cutting leaves are easy to rot.

Tiger skin orchid takes root

Cuttage rooting of tiger skin orchid is a long process, and it takes a month to take root, so we need to wait patiently. After 1-2 months of rooting, many small buds will appear and seedlings will gradually grow.

In short, it takes half a year for Tiger Pilan to grow seedlings from cuttings. Flower friends need to have enough patience to wait. During this period, don't worry and do the preliminary work well. Just wait patiently. I believe your Little Tiger Pilan will grow well.

What are the culture methods of tiger skin orchid? the culture methods and matters needing attention of tiger skin orchid

Tiger skin orchid, also known as tiger tail orchid, is a relatively drought-tolerant plant, so how to raise it? Let's learn about the breeding methods and matters needing attention of Tiger Pilan.

I. the culture method of tiger skin orchid

1. Soil: Tiger skin orchid soil needs loose and strong air permeability, so when preparing soil for tiger skin orchid, we must pay attention to using rotten leaves of 2 hand 3 and garden soil of 1 hand 3, and keep in mind that the soil must be loose and ventilated, otherwise it will cause water not to evaporate easily, resulting in rotting of the rhizome. It can also be mixed with 3 parts of fertile garden soil and 1 part of cinder, and then add a small amount of bean cake or chicken manure as base fertilizer.

2. Fertilization: Tiger Pilan has no great requirement for fertilizer, but it can grow better if it can be irrigated once every 10 to 15 days during the growing period.

3. Lighting: Tiger Pilan should not be in the dark for a long time, and should always give scattered light, otherwise, the leaves will be dark and lack vitality. But do not suddenly move to the sun, should first adapt to the dark light.

4, temperature: Tiger skin orchid likes warm climate, the most suitable temperature for growth is 20 Mel 30 °is not resistant to cold, growth stops when it is lower than 13 °, overwintering temperature should not be lower than 8 °, it will rot from the base of leaves and cause plant death, so we should do a good job of cold protection and warmth during overwintering. In summer, ventilation should be strengthened to reduce the temperature.

5. Humidity: the watering of Hu Pilan during the growing period should grasp the principle of dry rather than wet. When new plants sprout at the root neck in spring, they should be watered properly to keep the basin soil moist, and do not let water accumulate in the basin in the rainy season. Usually, clean water can be used to scrub the foliar dust to keep the leaves clean and bright.

6. Propagation: Tiger skin orchid can be propagated by ramet and cutting. All varieties of tiger skin orchid can be divided into plants, generally combined with changing pots in spring, the method is to cut the overgrown leaves into several clumps, each with leaves, but also a section of rhizome and sucking buds, which can be planted in the pot respectively. Yellow rimmed or silver-veined varieties of tiger skin orchid use cutting method, when the temperature is above 15 ℃, the practice is to take leaves 5-10 cm long, slightly dry after cutting into the sand, cutting can not be reversed, cutting after spraying new high-fat film, on the plant surface, can prevent bacteria infection, improve the ability to resist natural disasters, improve the intensity of photosynthesis, pay attention to maintain a certain humidity, after a month can take root.

7. Turn the basin: Tiger Pilan usually turns the basin once every 3 years, usually only after the leaf clusters are full. Because of the upward growth of the plant, the ornamental value is high when the flowerpot is small and dense, so the pot should not be large, and it is appropriate to plant in a deeper tube-shaped flowerpot, so that the upper and lower proportion is coordinated and stable, and the underground stolon will circle and extend along the edge of the pot. and it won't affect the growth of the plant.

8. Pest control: Tiger skin orchid is often harmed by anthracnose, leaf spot, bacterial soft rot and weevil.

II. Matters needing attention in tiger skin orchid culture

1. If the tiger skin orchid is placed indoors for a long time, it is not suitable to suddenly move directly to the sun. It is better to move to the light first, so that it can see the sun after an adaptation process, so that the leaves will not be burned.

2. Water properly and master the principle that it is better to dry than wet. Usually scrub the foliar dust with clean water to keep the leaves clean and bright. When sprouting new plants at the root neck in spring, the basin soil should be properly watered to keep the basin soil moist; in summer high temperature season, the basin soil should always be kept moist; the amount of watering should be controlled after the end of autumn, and the basin soil should be kept relatively dry to enhance cold resistance.

The above is the tiger skin orchid breeding methods and matters needing attention are introduced, although the tiger skin orchid drought tolerance is relatively easy to breed, but still need to learn the breeding method.