MySheen

The reason for the sagging and yellowing of the leaves of white palm

Published: 2024-12-22 Author: mysheen
Last Updated: 2024/12/22, The phenomenon of soft and sagging leaves caused by too much watering, usually watering should not be too wet, too wet soil is easy to cause root rot and leaf sagging. Remedial measures I believe that many flower friends know the phrase "do not dry, do not water". The watering of white palm should also follow this principle, watering after the soil is dry.

Too much watering

Watering too wet caused by the phenomenon of soft and sagging leaves, usually watering should not be too wet, too wet soil is easy to cause root rot and leaf sagging.

Remedial method

I believe many flower friends know the phrase "do not dry, do not water", the watering of white palm should also follow this principle, watering after the soil is dry. Make sure the water temperature is not too low when watering.

The basin has not been changed for a long time

The white palm has not changed the basin to loosen the soil for a long time, the soil plate is hard and impervious, and the irrigated water can not penetrate into the soil layer, resulting in most of the roots unable to absorb water and nutrients, and the symptoms of sagging and softening of yellow leaves occur when they lose water and lose nutrients.

Remedial method

Family breeding white palm should timely loosen the soil to change the basin, every early spring to change the basin, check the soil condition, if more caking, it is recommended to break up in the sun after replanting. When planting, half of the old soil is dumped and replaced with loose soil, which is beneficial to the growth of the root system. During normal maintenance, loosen the soil every half a year to increase the oxygen content in the soil.

It is inappropriate to slow down seedlings

Most white palms in the family are purchased directly from the flower market. You know, most of the flowers in the flower market grow in greenhouses. Moving to the family will change the environment, if the plant is not given a full adaptation process, directly placed in the sun for normal maintenance, it is easy to show wilting state.

Remedial method

The newly bought white palm should first put the plant in a ventilated and cool place with scattered light and water it properly. It will be transferred to normal maintenance after a week.

Temperature and humidity discomfort

Although the growth temperature of white palm is between 5-30 ℃, low temperature still has a certain effect on its growth, and humidity is also an important factor. Leaf sagging can easily occur in dry and cold winter conditions.

Winter indoor dry, poor ventilation, leaf loss of water will appear leaf sagging. In addition, if the potted plant is placed in a place with low temperature and small space, the leaves are also easy to turn yellow.

Remedial method

When the temperature decreases after autumn, move the plant indoors for maintenance, pay attention to increase air humidity, spray around the plant every day, and wipe the leaves with cotton cloth for 2-3 days. Properly control the water and keep the basin soil moist.

More related content of white palm culture, all in the four Seasons Plant Network!

There are four reasons for the drooping leaves of white palm, and the leaves are tall and straight from this plant type.

White palm is a relatively common plant. White palm is one of the common green plants placed in offices and homes. Today, I would like to share with you that there are four major reasons for the drooping leaves of white palm. From this plant type, the tall and straight leaves are oil green.

The culture method of white palm:

1. Soil: White palm potted plants require loose soil, good drainage and ventilation, and can not use heavy soil. Generally, rotten leaf soil, peat soil and a small amount of perlite can be used as substrate, and a small amount of organic fertilizer can be added as base fertilizer when planting.

2. Time: in combination with basin change from March to May in spring or after autumn.

3. Ramet: select the two-year-old plant for ramet propagation, lift the whole plant out of the basin, and cut the rhizome from the base of the plant clump, with at least 3-4 leaves in each clump.

4. Upper pot: put the plant with good ramet back into the pot and restore it in a semi-shady place after planting. When it takes root, it should be noted here that it should be cut with a stem, and then apply charcoal ash to the wound to prevent decay. When the root system returns to normal, it can enter the normal management.

5. Illumination: light is very important for plant growth. White palm needs better light in winter and early spring, but it should be shaded gradually when the light is getting stronger. If you enjoy it in the shade, you can't directly expose it to the sun. This is very bad for the growth of white palm.

6. Temperature: White palm is a kind of species that likes high temperature and should be cultivated in high temperature greenhouse. The lowest temperature in winter should be 14-16 ℃ at night and about 25 ℃ in daytime.

7. Watering: White palm should always keep the basin soil moist during the growth period, but not too much watering, too much basin soil will be moist for a long time, easy to cause rotten roots and plants withered and yellow.

8. Fertilization: do not apply thick fertilizer or raw fertilizer, and water once after applying solid fertilizer, it is best to use thin fertilizer instead of water, so it generally will not produce fertilizer damage, and white palm will grow very luxuriantly.

9. Pests: plants are the most popular pest during the growth period, so special mites should be sprayed regularly to control them, such as dicofol, Nisolan, pyridaben and so on.

10. Change the basin: change the basin every 1-2 years, change the basin, trim the root system, remove part of the old root and over-long root system, remove the old soil, and replace it with new culture soil, so as to facilitate the flowering of white palm.

Four major causes of white palm leaf sagging:

1, water shortage: solution: in the case of lack of water, white palm leaves will droop, in general, after watering, it can be recovered in a few hours.

2, lighting: solution: White palm can not stand the hot sun, too strong light will appear leaf drooping, the maintenance of the environment should be in ventilated astigmatism, appropriate shade is also possible.

3, slow seedling: the solution: some white palm is just bought back, need a period of time to slow the seedling, pour good water and then slow the seedling in a cool place.

4, humidity: solution: this kind of situation mostly appears in winter, some flower friends' maintenance environment indoor humidity is small in winter, and the ventilation is not good, it is normal for white palm to appear leaf sagging, in this case, more water should be sprayed to increase humidity.

Points for attention in the culture of white palm:

1. Because the white palm grows fast and needs a large amount of fertilizer, liquid fertilizer must be applied every 1 or 2 weeks in the growing season.

2. Provide sufficient water at the same time, keep the basin soil moist, and spray water to the leaf surface and the ground during the high temperature period to improve the air humidity. If the surrounding environment is too dry, the new leaves become small and yellow, and when they are serious, they wither and fall off. The amount of water should be reduced at the end of autumn and winter, and the basin soil should be kept slightly moist.

3. It requires semi-overcast or scattered light conditions, and 60%-70% shade in the growing season. If the light is too strong, the leaves are easy to burn and scorch, and the leaves are dim and lose luster; if the light is too dark for a long time, the plant growth is not robust and it is not easy to bloom.

4. for the species that like high temperature, long-term low temperature and humidity are easy to cause root rot and aboveground parts withered and yellow, so we should pay attention to cold protection and heat preservation in winter and keep the basin soil moist at the same time.

White palm leaves drooping for four reasons, from this plant type tall and straight leaves oil green hope this article will be helpful to you, I wish you good luck.

What about the drooping leaves of white palm?

Causes of sagging leaves of white palm

Too much watering

The phenomenon of leaf softening and sagging caused by watering is not easy to be too wet at ordinary times, and the over-wet soil is easy to cause root rot and leaf sagging. It is best to keep the soil dry after watering, so that it is beneficial to the growth of roots so that the phenomenon of leaf sagging and softening is not easy to occur.

The basin has not been changed for a long time

White palm has not changed the basin to loosen the soil for a long time, the soil plate is hard and impervious, and the irrigated water can not penetrate into the soil layer, resulting in most of the roots can not absorb water and nutrients, resulting in the loss of water and nutrition, the symptoms of yellow leaves sagging and softening.

It is inappropriate to slow down seedlings

Most of the white palms in the family are purchased directly from the flower market, we should know that most of the flowers in the flower market grow in the greenhouse, the growth environment is treated, and the environment will change when moved to the family. If the plant is not given sufficient adaptation process, directly put in the sun for normal maintenance, the correct position is easy to show wilting state.

Improper humidity

Foliage plants are prone to leaf sagging in winter, indoor dry in winter, poor ventilation, leaf loss of water will appear leaf sagging. In addition, if the potted plant is placed in a colder, narrow space, the leaves are also easy to turn yellow.

The solution to the yellowing of white palm leaves

Slow down seedlings in time

The newly bought white palm should give it sufficient time to slow down the seedlings, put the plant in the bright shade for a week, properly control the water, and maintain normally after a week, which can avoid the phenomenon of leaf yellowing to a certain extent.

Loosen the soil and change the basin at the right time

Change the basin in early spring every year and check the soil condition. if there are more caking, it is recommended to break up and replant after drying in the sun. When planting, half of the old soil is dumped and replaced with loose soil, which is beneficial to the growth of the root system. During normal maintenance, loosen the soil every half a year to increase the oxygen content in the soil.

Humidification and water control

When the temperature decreases after autumn, move the plant indoors for maintenance, pay attention to increase air humidity, spray around the plant every day, and wipe the leaves with cotton cloth for 2-3 days. Properly control the water and keep the basin soil moist.

The solution to the sagging of white palm leaves has been told by the editor, if your white palm leaves droop, you might as well try according to the above content!

 
0