Fairy refers to why it doesn't blossom.

It's not time.

Fairies only blossom, usually 2 to 3 years after grafting, so fairies should pay attention to maintenance after grafting, and it will not be able to blossom until time, so as long as you take good care of it in the first 2 to 3 years.

Improper lighting

Light is also a very important condition for the cactus to bloom. For the cactus, it needs short-day light to blossom well. To have suitable sunshine, the time should not be too short or too long. Fairies mean that they are in a dark environment for more than 12 hours a day, so they need a certain amount of shading, otherwise it will affect flowering.

Generally speaking, fairies do not blossom for the above two reasons, but there are still other reasons, we will not introduce them one by one. Next, we will specifically explain the maintenance methods of the fairy finger.

Culture methods and matters needing attention of fairy finger why fairy finger does not blossom

There are some unique varieties of cactus, which are somewhat different from the usual cactus, but they are indeed covered with thorns and have the feeling of some cactus, so people add some of its appearance features to this unique cactus to create a new name for it.

The culture method of fairy finger

1. Temperature: the fairy likes to be warm, the suitable temperature for growth is 15-25 ℃, it is not cold-resistant, and the overwintering temperature is above 51 ℃. The plant grows slowly at 20 ℃ and stops growing at 15 ℃, and the plant is vulnerable to cold injury at low temperature in winter, which makes the grafted fairy plant fall flowers.

2. Lighting: fairies like half-shade and avoid strong direct sunlight. If the light is too strong, the plant will become yellow and the stems and leaves will wither. It should be shaded from May to September, and plenty of sunshine is needed for the rest of the time. The formation and development of flower buds requires a dark environment of 12 to 14 hours a day. Flower bud differentiation and bud gestation can not have too bright lights at night, otherwise it will affect the bud flowering, such as proper shading can prolong the flowering time.

3. Watering: fairies are more resistant to drought and avoid waterlogging. During the growth period of spring and autumn, water should be fully supplied to keep the basin soil moist, but it should not be watered too much, otherwise it is easy to lead to rotten roots. The potted soil during flowering is required to be moist and dry, and the potted soil is too wet due to too much watering, resulting in bud withering and shedding. Dormancy period after flowering and semi-dormancy period in summer, we should pay attention to control watering, and prevent rain, watering too much or summer rain, will lead to rotting roots.

4. Fertilization: fairies do not like to be big, but they need to consume a lot of nutrients because of the large amount of buds and flowers, so they must be given enough nutrients to blossom normally. When the plant begins to grow in spring, nitrogen-based fertilizer should be applied every 10 days to thicken the leafy stem. When flower buds begin to differentiate in autumn, phosphorus-based fertilizer should be applied every 7 to 10 days to promote flower bud differentiation and bud growth. Lack of nutrients will often cause buds and flowers to fall, and fertilizer should be stopped during dormancy in winter and semi-dormancy in summer.

5. Pruning: the fairy refers to a pruning in combination with turning the basin in spring, thinning the overdense branches and shrunk the remaining branches. Cutting off the nodular leafy stem at the front end can benefit the hairy leaves after growth and strengthen the growth potential of the plant. After budding, if there are too many buds, you should sparse buds, generally leaving 1 bud for each leafy stem.

6. turning the basin: the fairy refers to turning the basin every 2 years, which should be pruned after flowering to before sprouting and growing. Fertile soil with good drainage and air permeability, the matrix can be prepared with rotten leaf soil, peat soil, rice chaff ash and other materials. When putting on the pot, you should trim the withered roots and the over-long old roots, and wait for the roots to dry before planting them into the pot.

Matters needing attention in culture of fairy finger

1. Control moisture

Winter needs to go through a period of freezing and dormancy, otherwise it is difficult to blossom. After freezing, it is necessary to keep it dry until it is about to bloom, during which there is no need to water.

After entering the spring, it is still not watered, and when the flower buds are the size of soybeans, you can begin to water them thoroughly, which can promote the fairy finger to have more buds, which is conducive to flowering.

During the dormancy period after the fairy refers to flowering and high temperature in summer, it is necessary to control moisture and prevent rain to avoid rotting roots.

2. Turn the basin and trim

The basin is turned once every 2 years, and the substrate can be prepared with rotten leaf soil, peat soil, rice chaff ash and other materials. Spring combined with turning the basin for pruning, thinning the overdense branches, and shrunk the remaining branches. Spray stone sulfur mixture after pruning to reduce the harm of germs in spring.

Fairy refers to why it doesn't blossom.

1. Fairies mean that they do not blossom because there is no time.

Cactus will blossom, under normal circumstances, cuttings or grafting cactus, need to be cultured in 2muri-3 years before they can blossom. Therefore, in the cultivation of fairy refers to, if the maintenance time is not enough, less than the age of flowering, then it is unlikely to bloom. This requires good care and patient waiting on weekdays.

In addition, if the flowering time of the easy fairy is not reached, it will not blossom. The flowering time of the fairy finger is generally later than that of the crab claw orchid. It begins to bud from October to November, but it does not blossom until February. It usually withered at the end of March and early April.

2. Fairies refer to the fact that they do not bloom because of improper lighting.

Light is an important condition for fairy finger flowering, for fairy finger, it needs short-day sunshine to blossom well, which requires a suitable sunshine time.

Generally speaking, the flower buds of fairy fingers begin to differentiate in autumn, and it is necessary to ensure short sunshine before flowering is advantageous. If the light is too long, it will affect the flowering of fairy fingers.

In general, the autumn light in the northern part of China can meet the flowering needs of the fairy finger, but not in the southern region. Therefore, in the flower bud growth of the fairy finger, it is required to have more than 12 hours of dark environment every day, and sometimes it needs to be shaded. Love needs to pay attention at night, it is best to put the cactus in a place where there is no light, otherwise it will affect the flowering.

Cutting Propagation method of Fairy finger

1. Cuttage propagation of fairy finger-time

For the cuttage of fairy finger, the best season is the growing season, and the best is from April to May after the flower fade.

2. Cuttage propagation of fairy finger-soil substrate

Home cuttings can buy prepared cutting substrates or use medium-coarse river sand, but rinse with clean water several times before use. Do not use sea sand and river sand in saline-alkali areas, they are not suitable for the growth of flowers and plants.

3. Cutting propagation of fairy finger-- water and fertilizer

Cuttings rooting before the shade, less watering, about 20 days to take root. After the formation of flower buds, the potted soil should not be too dry or too wet to prevent the buds from falling off.

Fairy refers to the application of dilute organic liquid fertilizer every 2 to 3 weeks during the growing period, or a small amount of compound fertilizer.

4. cuttage propagation of fairy finger-- concrete method

Cuttings of 1-4 stem nodes or large branches with branches can be taken. When cutting, the wound is not stained with water and dry in the place where the sunlight is not direct for two or three days to make the wound heal.

The breeding method of cactus is very similar to that of cactus, but there is more water in cactus, and it is not as rough and thick as cactus, so it needs to be taken care of more carefully. In particular, moisture control must be done well, otherwise the whole situation is likely to rot.

Why doesn't the fairy blossom? Analysis of the reasons for not flowering many flower friends encounter the problem of fairy refers to non-flowering, and do not know what the reason is. This article collates some reasons that are easy to lead to fairy finger non-flowering, flower friends can be used as a reference to investigate the problem. First of all, we should know that it takes 2-3 years for cuttings or grafted seedlings to blossom. In spring grafted fairies, sterile buds do not blossom in that winter, and flowering can only be achieved in the following winter. If grafted in autumn, most of the buds can blossom in winter of that year. The reason is that the scion is formed on the mother, but it no longer blossoms in the second winter and must blossom in the third winter. If the maintenance time is not enough, or more patient, and so on, and so on, in addition, the flowering period of the fairy finger is about a month later than that of the crab claw orchid, generally beginning to bud from the end of October to the beginning of November, blooming in February, and blooming at the end of March and the beginning of April. Secondly, and one of the most important reasons is that fairies refer to short-day flowering plants, the main factor affecting flowering is the duration of light, and short-day illumination after autumn is conducive to flower bud formation, requiring a dark environment of 12-14 hours a day. We should pay attention to that there can not be too bright lights at night, otherwise it will affect the bud blooming. In addition, it is understood that the lack of phosphorus and potassium fertilizer and other nutrients will also affect its flowering effect. Generally speaking, the natural light in northern China can be satisfied after late September, and a small amount of family cultivation does not need artificial shading, but it should be noted that flowerpots should be placed where there is no light at night, while flower friends in the south should pay attention to the problem of short-day sunshine. Let's take a look at the maintenance methods that the fairy refers to. Fairies like to be warm, not cold-resistant, not heat-resistant, drought-resistant and waterlogged, and should grow in fine drained, moist and fertile sandy soil. After the beginning of autumn, the fairy finger should still be placed in a sunny place and be exposed to the sun, generally applying phosphorus and potassium fertilizer and nitrogen fertilizer once a month to grow good autumn branches. Immortal refers to not cold-resistant, moved indoors in early October, put in the morning sun, properly buckle fertilizer and water, pay attention to ventilation, and promote flower bud differentiation. When small buds grow on the stem node, the liquid water of available phosphorus and potassium fertilizer is applied every half a month until before flowering. Fertilization is strictly prohibited when flowering. It is cold in winter, the indoor temperature of fairy finger is 10 ℃ to 15 ℃, the lowest is not less than 5 ℃, otherwise it will cause buds to fall. Watering should be chosen in sunny noon watering about 10 ℃, the amount can not be much, do not pour cold water. At this time, the more sufficient light, the better, to ensure that more than 6 hours of light is better. And often change the direction of the basin, so that layers of surface by photosynthesis, improve the flower decoration rate. Conclusion: the above is the analysis of the reasons why the immortals do not blossom. I hope it will be helpful to everyone.