How do you grow purple jasmine? Talking about the cultivation and management skills of purple jasmine

Purple jasmine flowers are purple, and generally open in the afternoon, the flowering period is long, flowering with a light fragrance, high ornamental value, and simple planting method, is a good family potted flowers. Those who like flowers and plants can have a try.

1. Sowing seeds

Put drainage stones in the flowerpot, and then put into the soil, because the purple jasmine seeds are relatively large, so use the point method to sow seeds, dig a few small holes in the soil with your fingers, put the seeds, and then cover the soil. Keep the soil moist during sowing and bask in the sun properly.

2. Watering

Purple jasmine likes a humid climate, so watering keeps the soil moist, watering the soil when the soil is dry, but not stagnant water, otherwise it is easy to die of waterlogging.

3. Lighting

The purple jasmine in the seedling stage can prevent the branches and leaves from growing under sufficient sunshine. After potted, purple jasmine likes to grow in the shade, and it is best to grow under the shelter, and occasionally bask in the sun, which is suitable for growing in a semi-shady environment and conducive to flowering.

4. Fertilization

Purple jasmine has strong nature, strong adaptability and extensive maintenance and management. In family farming, if you can wash meat and fish water and wash rice water from time to time, the flowers will bloom more vigorously and the flowers will be more colorful. Fertilizer can be applied once every two weeks to help purple jasmine bud blossom.

5. Temperature

Purple jasmine is not resistant to cold, so it needs to take good measures to survive the winter by digging up its roots at the end of autumn, placing them in soil with a suitable moist temperature, and growing again the following year.

The planting method of purple jasmine its seeds also have cosmetic effect!

Purple jasmine is not only fragrant, but its seeds and leaves also have the effects of beauty, heat-clearing and detoxification. When the seeds mature, the appearance is black like a ball, and the inside is white. When cosmetology, you can take a number of mature seeds, grind them into powder, remove powder and rub your face after peeling, and remove facial spots to make your face smooth, white and cosmetic.

Purple jasmine has strong vitality, can sow and reproduce, and the survival rate of planting is high. The above is the conservation guide for purple jasmine, which can be referred to by parents who want to plant it.

How to raise triangulated plum? Talking about the cultivation points of leaf flower (triangular plum) (experience version) triangular plum, alias: kudzu, three-leaf plum, towel, rhododendron, triangular flower, leaf flower, leaf plum, paper flower, South American purple jasmine and so on. Evergreen climbing shrubs. Like warm and humid climate, not cold-resistant, more than 3 ℃ can safely survive the winter, more than 15 ℃ before flowering. Like plenty of light. The flowering period of leaves is longer, and the flowers are many and beautiful. the general flowering period in the south is from October of that year to early June of the following year. This paper mainly introduces the cultivation points of Triangle Plum for flower friends' reference and study. First, the selection of culture soil leaf flower is not strict on the soil, but afraid of stagnant water, not resistant to waterlogging, therefore, we must choose loose, well-drained culture soil. Generally, 4 parts of humus soil, 4 parts of garden soil and 2 parts of sand can be selected, and sun-dried pond mud mixed with some coal cake dregs can also be used as basin soil. Second, rational fertilization in order to make leaf flowers blossom, we must ensure adequate nutrients, while fertilization should be timely, appropriate amount, rational use. In general, during the peak growth period from April to July, liquid fertilizer is applied every 7 to 10 days to promote plant growth. Fertilizer can use 10% to 20% cooked bean cake, rapeseed cake water or human feces water. Since August, in order to promote the gestation of flower buds, fertilizer based on phosphate fertilizer has been applied every 10 days, and 20% liquid fertilizer such as rotten chicken, duck, pigeon dung and fish can be used. From October to mid-November, it is necessary to apply phosphate-based fertilizer every half a month, with a fertilizer concentration of 30% to 40%. In the future, topdressing should be applied once after each flowering, so that the leaf flowers will continue to get nutrients during the flowering period. Third, it is necessary to control the watering of leaf flowers before flowering and master the principle of "do not dry, do not water, water should be thoroughly". However, in order to make leaf flowers bloom neatly and more, water control must be carried out before flowering. The watering of leaf flowers has been controlled since September, and each watering can only be carried out after the potted soil is dry and the branches and leaves are soft and sagging, which is repeated for half a month and returns to normal watering after half a month. Do not apply fertilizer during the water control period, so as not to burn the root system. In this way, the leaf flower can bud and blossom in about a month, and the flower blossoms neatly and flourishingly. Due to long-term watering, fertilization and Rain Water scouring, the basin soil is easy to harden, so it is necessary to loosen the soil regularly and remove weeds in the basin soil at the same time to facilitate the growth of leaf flowers. Otherwise, the basin soil is hardened and stagnant, which can easily cause the root system of leaves and flowers to rot or grow badly. In addition, the leaf flower growth rate is faster, the root system is developed, there are many whisker roots, and the pot needs to be changed once a year. Fifth, pruning should be suitable for the rapid growth of leaf flowers, and attention should be paid to shaping and pruning during the growing period, so as to promote the growth of lateral branches and produce more flower branches. The number of pruning is generally 1 to 3 times, should not be too much, otherwise it will affect the number of flowering. After each flowering, the residual flowers should be removed in time to reduce nutrient consumption. After the flowering period, the overdense branches, bore branches, overgrown branches and weak branches should be thinned, and other branches should not be pruned or only slightly trimmed, so it is not suitable for heavy pruning, so as to shorten the growth period of the next round and promote them to bloom early and blossom many times. 6. pay attention to light and ventilation. Leaf flower is a positive plant. In order to make the branches and leaves grow normally and increase the number of flowering, the leaf flower must be placed in a well-lit and well-ventilated position and let it shine for 8 to 12 hours a day. If the position is often shaded, it will make the plant grow too long and reduce the number of flowers. If the position is not ventilated or placed too densely between the pots, the leaves will fall off, especially in the hot summer, which can easily cause large area leaves to fall off, thus affecting the growth and flowering of the plant. Strengthening the prevention and control of diseases and insect pests the main common pests of leaf flowers are leaf beetles and aphids, and the common diseases are shoot blight and leaf spot. At ordinary times, it is necessary to strengthen loosening soil and weeding, remove dead branches and diseased leaves in time, and pay attention to ventilation so as to reduce the spread of the disease. Strengthen the examination of the disease and deal with it in time when it is found. Dimethoate and topurazine can be used to control the shoot blight. For leaf spot disease, 65% Dysen zinc wettable powder was sprayed with 600 times liquid. 8. Propagation method: leaf flowers are propagated by cuttings and strips, mainly by cuttings, outdoor cuttings, with a high survival rate in summer. In the greenhouse, they can be cut from January to March, take mature branches, insert them into the sand bed, take root in 20-30 days at room temperature, divide into pots in 40 days, and flowers can be seen in winter in the second year. Conclusion: the above is the introduction of the key points of the cultivation of triangular plum, hoping to be helpful to the flower friends who plant triangular plum. A brief discussion on the Leaf picking Technology of Flower Bonsai

Recently, many flower friends have asked the editor why his flowers are not as good-looking as others. Today, the editor will talk about one of the tips, picking leaves. In the process of flower bonsai cultivation and management, timely and appropriate removal of leaves will help to improve the ornamental value of flower bonsai, prolong the viewing time, and promote branching and flowering and fruiting. Different kinds of flowers and trees, leaf picking period, leaf picking quantity, leaf picking purpose, and the maintenance and application before and after picking leaves are different. therefore, the leaf picking technology should be used correctly.

After the jasmine overwintered indoors, the jasmine was maintained in the sunny place for about 15 days, combined with turning the basin and changing the soil, removing all the old leaves, pruning the branches, cutting off the thin technical strips in the dense parts, and shortening all the branches. it has a good effect on promoting the growth and development of branches and leaves and the whole plant.

Milan has strong growth, abundant branches and leaves, can continue to branch leaves and blossom, but also continue to form dark green and dull old leaves, timely removal of these old leaves can make the whole plant leaf color bright green, avoid leaf color mixed, conducive to ventilation and light, reduce the breeding of diseases and insects, can reduce nutrient consumption, conducive to the growth and development of new branches, leaves and flower buds.

Chinese wolfberry has a strong nature, tender leaves and red fruits have good ornamental value, and they are good materials for bonsai. The pot structure does not allow blossom and fruit before autumn, and fertilizes quickly before and after the beginning of the autumn festival. A week later, 80-90% of the leaves are removed, while the branches are trimmed according to the shape. 7-10 days later, the new leaves and buds come out at the same time. After the new leaves are unfolded, cake, fertilizer and water are applied once a week to make the flowers and leaves flourish and the red fruit is full of branches after autumn.

Elm, Magnolia, pomegranate, crape myrtle, bauhinia, lobular privet and other tree species in the bonsai stump take leaf-making measures around early September or before they need to be exhibited. About 10 days before picking leaves, apply quick fertilizer once, in order to accumulate nutrients for new leaf germination, cut leaves with scissors, retain petioles, and germinate new leaves 10-20 days later, not only beautiful colors and vitality of new leaves, but also smaller leaves. It can better reflect the styling beauty of the branches.

The red maple leaves are bright red and eye-catching, but the old leaves talk secretly or return to green. They can be picked twice in June and September to keep the leaves bright red throughout the year and improve the ornamental effect.

In the application of leaf picking technology, untested tree species shall not be abused. Special care should be taken after making leaves. After a large number of leaves are picked, water metabolism is slow, soil moisture should be controlled, it is appropriate to avoid rain in case of heavy rain or continuous rain, fertilizer application should be suspended, and normal maintenance should be resumed after the new leaves are unfolded. Bonsai with weak trees should not pick leaves, otherwise, it will accelerate weakness or death.

Through the detailed introduction of this article, I hope you can gain something! Welcome to continue to follow the succulent flower bed and learn more about the latest information about bonsai production!