How can we grow beautiful banyan leaves? Matters needing attention in the Culture of Ficus chinensis

Ficus arborescens is a small shrub, born in mountains, wilderness or shrub forests, and is planted in Guangdong, Hainan, Guangxi, Fujian, Hunan, Hubei, Jiangxi, Anhui and Zhejiang. The plant likes warm, moist and sunny environment, and its flowering period is from June to August. It can be used for both ornamental and medicinal purposes. It has the effects of dispelling wind and dehumidification, detoxifying and detumescence, promoting blood circulation and dredging menstruation.

I. Culture techniques of Ficus chinensis

1. Water and fertilizer: the watering of Qin leaf banyan should follow the principle of seeing dry and wet. Liquid fertilizer is generally applied every 7-14 days during the growth period, and stop fertilizing in winter.

2. Lighting: banyan leaves like the environment with sufficient light, but they are taboo to direct strong light, because the direct light will make the leaves lose their luster and even burn them, while in winter, they can increase the light appropriately. Generally speaking, in a bright scattered light environment, it is best to receive 4 hours of light every day.

3. Temperature: the most suitable temperature for the growth of Ficus chinensis is 25-35 degrees, because its cold tolerance is relatively weak, so it is necessary to keep the temperature above 5 degrees in winter, which can ensure that the banyan tree can survive the winter safely.

4. Soil: Qin Ye Banyan likes loose, permeable and well-drained soil (such as peat soil), which can adapt to acidic to slightly acidic soil. It is best to mix rotten leaf soil, culture soil and coarse sand during cultivation, and a small amount of mature base fertilizer can be added at the same time.

5. Watering: Qin leaf banyan likes a humid environment and has high requirements for moisture. Watering should follow the principle of dry and wet, and watering should be thoroughly watered. Water demand is large in spring and summer, so it is necessary to keep the soil moist. When in a long-term low temperature environment, it is necessary to reduce the amount of water, otherwise it is easy to lead to planting death.

6. Fertilization: banyan needs a large amount of fertilizer, so liquid fertilizer should be applied every 7-14 days in the growing season, but it can be stopped in winter.

II. Matters needing attention in the culture of Ficus chinensis

1. Selection of flowerpots

Banyan should choose a suitable flowerpot, neither too large nor too small, depending on the plant size. Generally, small plants can choose pots with a diameter of 20-25cm and larger plants can choose pots with a diameter of 30-35cm.

2. Maintenance of leaves

In the process of banyan culture, more attention should be paid to cleaning to avoid accumulating dust, otherwise the accumulated dust will easily block the sun, thus affecting the growth of banyan. When changing the basin every year or after moving indoors at the end of autumn, the banyan can be trimmed, and different shapes should be changed according to the needs of appreciation.

3. The disease of Ficus chinensis.

When the disease of fir should be quickly moved to a place with plenty of sunshine and good ventilation, and the diseased leaves should be cut off at the same time.

How to cultivate figs with piano leaves, culture methods and matters needing attention

Pay attention to the method of banyan culture. Figs are very good foliage plants in the hall, and they have high ornamental value in the indoor hall, so banyan has always been loved by people, so is it easy to raise banyan? How to cultivate figs with piano leaves is better. Here are the culture methods and matters needing attention of figs with leaves.

How to raise Banyan Ficus (daily culture method)

Bad flower friends will have questions, is the fir leaf easy to raise? In fact, Qin leaf banyan is very easy to cultivate. To understand the habits of Qin leaf banyan, as well as the daily basic culture methods of Qin leaf banyan, it can be basically done. The following basic culture methods of Qin leaf banyan.

1. Sufficient light

Qin leaf banyan likes the environment with plenty of light, if the light is too weak, it is not conducive to plant growth, but it is necessary to avoid strong direct sunlight in summer, otherwise it will make the leaves lose their luster or even burn them, and the light can be increased appropriately in winter. The banyan can grow well in bright scattered light, and it is best to receive about 4 hours of light every day.

2. Temperature control

The most suitable temperature of Ficus chinensis is 25 ℃-35 ℃, its cold tolerance is relatively weak, and it is better to keep it above 5 ℃ in winter, so that it can survive the winter safely.

3. The best soil

Qin leaf banyan likes loose, permeable and well drained soil, such as peat soil, which adapts to acidic to slightly acidic soil. Pot soil is best mixed with rotten leaf soil, culture soil and coarse sand, and a small amount of mature base fertilizer can be added.

4. Moisture wetting

Qin leaf banyan likes a humid environment and has a relatively high demand for water. It follows the principle of seeing dry and wet. When the basin soil is thoroughly dry, it will be watered thoroughly. There is a large water demand in spring and summer, so it is necessary to keep the soil moist, but do not pour too much water when you are in a low temperature for a long time, otherwise it will easily lead to plant death.

5. Large amount of fertilizer

Qinye banyan needs a lot of fertilizer, which can be seen by its hypertrophic leaves, so liquid fertilizer is applied once a week or two in the growing season to ensure its healthy growth, and fertilization is generally stopped in winter.

Matters needing attention in the culture of figs with piano leaves 1. Change of basin soil

The banyan leaves are changed in spring and trimmed in winter. The basin should be small, but heavy. This kind of tree is easy to be top-heavy and light, to prevent the flowerpot from falling down, too much water or not enough water will lead to yellow leaves. The bottom of the basin needs to be perforated to maintain good drainage, once thoroughly watered, and the next time it can be watered until the soil is dry. Potted plants are rotated 90 degrees a week to receive light evenly.

2. Selection of flowerpots

To choose a suitable flowerpot, not too large, small plants can choose 20-25 cm diameter pots, larger plants can choose 30-35 cm diameter pots, to pay attention to the bottom of the flowerpot need to be perforated, in order to maintain good drainage.

3. The problem of basin movement.

In fact, Qin Ye Rong is very residential, do not like to run around, so do not often move flowerpots, in indoor potted plants, you can rotate 90 degrees a week, in order to fully accept the sun.

4. Water and fertilizer management

Qinye banyan prefers to have a large range of moisture requirements in moist soil. The requirements of soil and fertilizer are not strict, and more than 20-20-20 flowers can be irrigated with calcium and potash fertilizer. The fairy banyan leaves grow faster, the seedlings of the previous month are smaller, and they do not need much fertilizer. They are watered with flowers 20-20-20 diluted 1000 times.

5. Maintenance of leaves

Qinye banyan is most worth watching than its strange leaves, so it must be well protected. Usually should pay more attention to clean up, to avoid the accumulation of dust, very thin can not, easy to block the sun, can spray some water to clean the leaves.

6. Management of pruning

When changing the basin every year or after moving to the room at the end of autumn, it needs to be trimmed, and different shapes can be changed according to the needs of appreciation to make it more classical and beautiful.

7. The disease of Ficus chinensis

After the disease, the plants of the fir should quickly move to a sunny and well-ventilated place, be careful not to sprinkle water on the leaves, and we need to cut off the sick leaves.

8. Propagation methods of Ficus arborescens

The propagation of Ficus chinensis is mainly by cutting, striping and so on. With the development of tissue culture technology, tissue culture leaf banyan is produced on a large scale, and its quality is much better than that of cuttings, strong resistance and fast growth.

The best propagation time: the cuttage of Ficus chinensis is best carried out at the turn of spring and summer combined with pruning and shaping.

How to raise Qin leaf banyan? Culture methods and matters needing attention of Ficus chinensis

Banyan is a common indoor foliage plant, which can not only green the environment, but also absorb secondhand smoke and purify the air in the living room. So, how to raise Qin leaf banyan? Next, I would like to introduce the culture methods and matters needing attention of Ficus chinensis.

Picture: Qin Ye Banyan

I. Culture methods of Ficus quinquefolia

1. Light

Qin leaf banyan likes the environment with plenty of light, if the light is too weak, it is not conducive to plant growth, but it is necessary to avoid strong direct sunlight in summer, otherwise it will make the leaves lose their luster or even burn them, and the light can be increased appropriately in winter. The banyan can grow well in bright scattered light, and it is best to receive about 4 hours of light every day.

two。 Temperature

The most suitable temperature of Ficus chinensis is 25 ℃-35 ℃, its cold tolerance is relatively weak, and it is better to keep it above 5 ℃ in winter, so that it can survive the winter safely.

3. Soil

Qin leaf banyan likes loose, permeable and well drained soil, such as peat soil, which adapts to acidic to slightly acidic soil. Pot soil is best mixed with rotten leaf soil, culture soil and coarse sand, and a small amount of mature base fertilizer can be added.

4. Watering

Qin leaf banyan likes a humid environment and has a relatively high demand for water. It follows the principle of seeing dry and wet. When the basin soil is thoroughly dry, it will be watered thoroughly. There is a large water demand in spring and summer, so it is necessary to keep the soil moist, but do not pour too much water when you are in a low temperature for a long time, otherwise it will easily lead to plant death.

5. Fertilizer application

Qinye banyan needs a lot of fertilizer, which can be seen by its hypertrophic leaves, so liquid fertilizer is applied once a week or two in the growing season to ensure its healthy growth, and fertilization is generally stopped in winter.

Picture: Qin Ye Banyan

II. Matters needing attention in the culture of Ficus chinensis

1. Selection of flowerpots

To choose a suitable flowerpot, not too large, small plants can choose 20-25 cm diameter pots, larger plants can choose 30-35 cm diameter pots, to pay attention to the bottom of the flowerpot need to be perforated, in order to maintain good drainage.

two。 The problem of moving the basin

In fact, Qin Ye Rong is very residential, do not like to run around, so do not often move flowerpots, in indoor potted plants, you can rotate 90 degrees a week, in order to fully accept the sun.

3. Maintenance of leaves

Qinye banyan is most worth watching than its strange leaves, so it must be well protected. Usually should pay more attention to clean up, to avoid the accumulation of dust, very thin can not, easy to block the sun, can spray some water to clean the leaves.

4. Management of pruning

When changing the basin every year or after moving to the room at the end of autumn, it needs to be trimmed, and different shapes can be changed according to the needs of appreciation to make it more classical and beautiful.

This is the end of the introduction on the breeding methods and matters needing attention of Qin-leaf banyan. Is it very easy? then it is time to raise a pot of Qin-leaf banyan at home.