Pictures and production methods of snow bonsai in June

June snow is one of the trees commonly used in Chinese bonsai, with the characteristics of thin leaves, dense branches, thick stem and exposed roots, so as a good material for bonsai, it is loved by the majority of horticulturists. Today, we have prepared some pictures of snow bonsai in June for you. You are welcome to comment and appreciate.

Pictures and production methods of snow bonsai in June

[plant archives]-

English name: June Snow

Scientific name: Serissa foetida

Alias: broken leaf holly, white horse bone, Jasminum, Cimin

Family: Rubiaceae of Rubiaceae

Genus: Serissa Comm. Ex Juss.

Distribution of origin: it is native to subtropical regions and can be grown as indoor plants in temperate regions.

Morphological features: evergreen shrubs, star-shaped white flowers bloom every summer, like snow accumulated on trees, some leaves are green, the surface is small and smooth, and the flowers can be divided into single and double petals. In modern times, varieties of purple flowers and variegated leaves have been cultivated.

The style of snow bonsai in June-

June snow branch dry soft and tough, can withstand flat tie, divided into straight dry type, Qiu qu type, cliff type and so on. If the basin is high, it can be bred into a cliff type. Cliff type can be divided into semi-suspension, full suspension and small suspension according to the degree of inclination. The so-called half-hanging, that is, the trunk is basically across the mouth of the basin. The fully suspended trunk should hang 45 degrees below the mouth of the basin. Small hanging trunks usually hang down about 30-40 degrees.

June snow bonsai production method and picture appreciation-

▲ processing modeling: using "wood cutting dry method" processing, can also use "cutting and binding method" processing. Banding is usually carried out from semi-deciduous leaves in winter to sprouting in spring, the trunk and branches of June snow are tied with wire, and the branchlets are finely trimmed and shaped.

▲ transplanting on the pot: it is appropriate to carry out in 2-3 months, choose a lighter purple sand basin or glaze basin, basin color should be slightly darker, contrast with flower color. The basin soil is required to be a sandy loam rich in organic matter, loose and fertile, with good drainage and air permeability.

▲ light and temperature requirements: June snow growth period should be placed in a sunny, warm, humid, well-ventilated place, shade 50% Mel 70% in summer and early autumn, and keep room temperature 5-12 ℃ in winter in the north.

▲ water and fertilizer management: snow bonsai growing season in June should be often watered, not too dry and wet for a long time, spray water to the leaf surface 1-2 times a day in summer; reduce watering times in winter, keep the basin soil moist and slightly dry. 0.5% phosphate and potassium fertilizer solution is applied 2-3 times a year from April to May, and thin organic fertilizer solution is applied 1-2 times in Ladong, which is not suitable for other seasons. Avoid applying thick fertilizer.

▲ basin turning and pruning: turn the basin once every 1-2 years, in spring from February to March or late autumn, remove all the old soil and trim the roots properly. It can be combined with turning the basin to lift the root to form a hanging root to improve the ornamental value. After the semi-deciduous leaves in winter to the sprouting of the following spring, plastic pruning is carried out, cutting long and ungrown branches, thinning the thin and weak branches that are too dense, cutting off the branches of diseases and insect pests and other messy branches that affect the ornamental; coring, wiping buds, removing branches and so on are carried out at the right time during the growing period. to keep it in a beautiful shape.

▲ pest control: aphids and snails occasionally occur in snow bonsai in June. Aphids can be sprayed with wind oil essence diluted 500,600 times, and snails can be sprayed with 58% wind and lightning excited EC 1500 times. Sometimes you will get root rot. At the beginning of the disease, use 12% oleic acid copper EC 600-1000 times, or 50% root rot 800 times solution to control the root and foliar spray, spray (irrigation) once every 3-5 days, continuous spray (irrigation) 3-4 times.

Conclusion: the June snow bonsai is not only elegant and beautiful, but also the edges of the leaves of June snow in Phnom Penh are yellow, just like a circle of gold, which sets off against the white June snowflakes that bloom in summer.

[more Encyclopedia of plants]

Poppy evening incense rose rhododendron lavender green pineapple bamboo bean valve green hyacinth crane cherry calla

African jasmine rose spring festival flower succulent plant tropical plant tequila canna forget-me-not dandelion

Taxus chinensis var. mairei cotton sweet-scented osmanthus flower hydroponics plant home fengshui plant bedroom fengshui plant plum blossom aloe

Jasmine radiation protection plant Tongqian grass potted bonsai making drug plant mistletoe indoor flower rich tree evergreen rich bamboo

Potted anthurium mint stone flower geranium garden crab claw orchid plain sailing Kunlun snow chrysanthemum water lily blue witch

Pictures and production methods of snow bonsai in June

June snow is one of the trees commonly used in Chinese bonsai, with the characteristics of thin leaves, dense branches, thick stem and exposed roots, so as a good material for bonsai, it is loved by the majority of horticulturists. Today, we have prepared some pictures of snow bonsai in June for you. You are welcome to comment and appreciate.

Pictures and production methods of snow bonsai in June

[plant archives]-

English name: June Snow

Scientific name: Serissa foetida

Alias: broken leaf holly, white horse bone, Jasminum, Cimin

Family: Rubiaceae of Rubiaceae

Genus: Serissa Comm. Ex Juss.

Distribution of origin: it is native to subtropical regions and can be grown as indoor plants in temperate regions.

Morphological features: evergreen shrubs, star-shaped white flowers bloom every summer, like snow accumulated on trees, some leaves are green, the surface is small and smooth, and the flowers can be divided into single and double petals. In modern times, varieties of purple flowers and variegated leaves have been cultivated.

The style of snow bonsai in June-

June snow branch dry soft and tough, can withstand flat tie, divided into straight dry type, Qiu qu type, cliff type and so on. If the basin is high, it can be bred into a cliff type. Cliff type can be divided into semi-suspension, full suspension and small suspension according to the degree of inclination. The so-called half-hanging, that is, the trunk is basically across the mouth of the basin. The fully suspended trunk should hang 45 degrees below the mouth of the basin. Small hanging trunks usually hang down about 30-40 degrees.

June snow bonsai production method and picture appreciation-

▲ pile source: split propagation was carried out in March and cutting propagation was carried out from April to October.

▲ processing modeling: using "wood cutting dry method" processing, can also use "cutting and binding method" processing. Banding is usually carried out from semi-deciduous leaves in winter to sprouting in spring, the trunk and branches of June snow are tied with wire, and the branchlets are finely trimmed and shaped.

▲ transplanting on the pot: it is appropriate to carry out in 2-3 months, choose a lighter purple sand basin or glaze basin, basin color should be slightly darker, contrast with flower color. The basin soil is required to be a sandy loam rich in organic matter, loose and fertile, with good drainage and air permeability.

▲ light and temperature requirements: June snow growth period should be placed in a sunny, warm, humid, well-ventilated place, shade 50% Mel 70% in summer and early autumn, and keep room temperature 5-12 ℃ in winter in the north.

▲ water and fertilizer management: snow bonsai growing season in June should be often watered, not too dry and wet for a long time, spray water to the leaf surface 1-2 times a day in summer; reduce watering times in winter, keep the basin soil moist and slightly dry. 0.5% phosphate and potassium fertilizer solution is applied 2-3 times a year from April to May, and thin organic fertilizer solution is applied 1-2 times in Ladong, which is not suitable for other seasons. Avoid applying thick fertilizer.

▲ basin turning and pruning: turn the basin once every 1-2 years, in spring from February to March or late autumn, remove all the old soil and trim the roots properly. It can be combined with turning the basin to lift the root to form a hanging root to improve the ornamental value. After the semi-deciduous leaves in winter to the sprouting of the following spring, plastic pruning is carried out, cutting long and ungrown branches, thinning the thin and weak branches that are too dense, cutting off the branches of diseases and insect pests and other messy branches that affect the ornamental; coring, wiping buds, removing branches and so on are carried out at the right time during the growing period. to keep it in a beautiful shape.

▲ pest control: aphids and snails occasionally occur in snow bonsai in June. Aphids can be sprayed with wind oil essence diluted 500,600 times, and snails can be sprayed with 58% wind and lightning excited EC 1500 times. Sometimes you will get root rot. At the beginning of the disease, use 12% oleic acid copper EC 600-1000 times, or 50% root rot 800 times solution to control the root and foliar spray, spray (irrigation) once every 3-5 days, continuous spray (irrigation) 3-4 times.

Conclusion: the June snow bonsai is not only elegant and beautiful, but also the edges of the leaves of June snow in Phnom Penh are yellow, just like a circle of gold, which sets off against the white June snowflakes that bloom in summer.

[more Encyclopedia of plants]

June snow bonsai pictures and production method

June snow is one of the trees commonly used in Chinese bonsai, with the characteristics of thin leaves, dense branches, thick stem and exposed roots, so as a good material for bonsai, it is loved by the majority of horticulturists. Today, we have prepared some pictures of snow bonsai in June for you. You are welcome to comment and appreciate.

[recommended reading] Lily longevity flower thousand-day red gardenia, gentleman orchid Hongyun, Platycodon grandiflorum, mulberry, primrose, mimosa

Pictures and production methods of snow bonsai in June

[plant archives]-

English name: June Snow

Scientific name: Serissa foetida

Alias: broken leaf holly, white horse bone, Jasminum, Cimin

Family: Rubiaceae of Rubiaceae

Genus: Serissa Comm. Ex Juss.

Distribution of origin: it is native to subtropical regions and can be grown as indoor plants in temperate regions.

Morphological features: evergreen shrubs, star-shaped white flowers bloom every summer, like snow accumulated on trees, some leaves are green, the surface is small and smooth, and the flowers can be divided into single and double petals. In modern times, varieties of purple flowers and variegated leaves have been cultivated.

The style of snow bonsai in June-

June snow branch dry soft and tough, can withstand flat tie, divided into straight dry type, Qiu qu type, cliff type and so on. If the basin is high, it can be bred into a cliff type. Cliff type can be divided into semi-suspension, full suspension and small suspension according to the degree of inclination. The so-called half-hanging, that is, the trunk is basically across the mouth of the basin. The fully suspended trunk should hang 45 degrees below the mouth of the basin. Small hanging trunks usually hang down about 30-40 degrees.

June snow bonsai production method and picture appreciation-

▲ pile source: split propagation was carried out in March and cutting propagation was carried out from April to October.

▲ processing modeling: using "wood cutting dry method" processing, can also use "cutting and binding method" processing. Banding is usually carried out from semi-deciduous leaves in winter to sprouting in spring, the trunk and branches of June snow are tied with wire, and the branchlets are finely trimmed and shaped.

▲ transplanting on the pot: it is appropriate to carry out in 2-3 months, choose a lighter purple sand basin or glaze basin, basin color should be slightly darker, contrast with flower color. The basin soil is required to be a sandy loam rich in organic matter, loose and fertile, with good drainage and air permeability.

▲ light and temperature requirements: June snow growth period should be placed in a sunny, warm, humid, well-ventilated place, shade 50% Mel 70% in summer and early autumn, and keep room temperature 5-12 ℃ in winter in the north.

▲ water and fertilizer management: snow bonsai growing season in June should be often watered, not too dry and wet for a long time, spray water to the leaf surface 1-2 times a day in summer; reduce watering times in winter, keep the basin soil moist and slightly dry. 0.5% phosphate and potassium fertilizer solution is applied 2-3 times a year from April to May, and thin organic fertilizer solution is applied 1-2 times in Ladong, which is not suitable for other seasons. Avoid applying thick fertilizer.

▲ basin turning and pruning: turn the basin once every 1-2 years, in spring from February to March or late autumn, remove all the old soil and trim the roots properly. It can be combined with turning the basin to lift the root to form a hanging root to improve the ornamental value. After the semi-deciduous leaves in winter to the sprouting of the following spring, plastic pruning is carried out, cutting long and ungrown branches, thinning the thin and weak branches that are too dense, cutting off the branches of diseases and insect pests and other messy branches that affect the ornamental; coring, wiping buds, removing branches and so on are carried out at the right time during the growing period. to keep it in a beautiful shape.

▲ pest control: aphids and snails occasionally occur in snow bonsai in June. Aphids can be sprayed with wind oil essence diluted 500,600 times, and snails can be sprayed with 58% wind and lightning excited EC 1500 times. Sometimes you will get root rot. At the beginning of the disease, use 12% oleic acid copper EC 600-1000 times, or 50% root rot 800 times solution to control the root and foliar spray, spray (irrigation) once every 3-5 days, continuous spray (irrigation) 3-4 times.

Conclusion: the June snow bonsai is not only elegant and beautiful, but also the edges of the leaves of June snow in Phnom Penh are yellow, just like a circle of gold, which sets off against the white June snowflakes that bloom in summer.

[more Encyclopedia of plants]

Poppy evening primrose rhododendron lavender green raven bamboo pea green hyacinth red crane cherry calla

African jasmine rose flowers spring festival flowers succulent plants tropical plants tequila canna other shore flowers forget-me-not dandelions

Taxus chinensis var. mairei cotton sweet-scented osmanthus flower hydroponic plant home fengshui plant bedroom fengshui plant plum blossom aloe

Jasmine radiation protection plant Tongqian potted bonsai making drug plant mistletoe indoor flower rich tree evergreen rich bamboo

Potted production of Anthurium andraeanum mint raw stone flower geranium garden crab claw orchid plain sailing tiger skin orchid Kunlun snow chrysanthemum water lily blue witch