MySheen

How to raise Buddha beads and orchids? The culture method of Buddha bead orchid

Published: 2024-11-22 Author: mysheen
Last Updated: 2024/11/22, How to raise Buddha beads and orchids? The culture method of Buddha bead orchid

In the present home decoration, more and more people pay more attention to the beautification of the home environment, but also stop the indoor greening on the plants. Buddha bead hanging orchid in home decoration is very strong, it can also be said to contribute a strength to home greening. The following is a detailed method of breeding Buddha beads and orchids, so that we can learn more about her.

[basic introduction of Buddha Pearl hanging Orchid] because it is composed of a series of bulging, full green oval leaves, it is also known as jadeite bead, lover's tears, green bell, green bell. Pearl orchid is not only an excellent indoor hanging foliage plant, but also a good indoor air purification flower. The Buddha-bead orchid native to southern Africa has a beautiful shape and is very suitable for ornamental plants. Its growth habit is warm and moist soil, can withstand drought, but not shade, and strong vitality, as long as give it a little water and nutrients, it can thrive. It does not require much light and can grow in strong light as well as in low light. [the culture method of Cymbidium] first: the method of reproduction. The propagation method of Cymbidium is mostly cutting method, which can trim the branches and leaves, each section is 8-10 cm, then insert it into the basin soil, half cover, the humidity is controlled between 50% and 60%, take root in 10 days to half a month, and then take good care of it in order to survive. At this time, it is most beneficial to plant growth to strictly control the amount of water and keep the pot soil in the state between dry and wet. Second: cultivation and management. Dry rather than wet is one of the key points in the cultivation of Cymbidium. In addition, it is also extremely important to apply thin fertilizer frequently. The so-called dry rather than wet is because the orchid from southern Africa likes a warm environment and is more drought-resistant than waterlogged, so it would rather be placed in a dry environment than stunted by too much watering. Third: pest prevention. In fact, there are few insect pests in Buddha bead orchids, but this is still the case. Generally speaking, the most common disease of Buddha bead orchid is aphid disease, which occurs in spring. When encountering this kind of phenomenon, it should be killed with 500 times omethoate. When pests, pay attention to increase the humidity of the page, can reduce pests, in addition, ventilation facilities should also be in place. [matters needing attention in the cultivation of Cymbidium] the first point: it belongs to the leaf fleshy, succulent and drought-resistant. Remember to water too much in farming. Spray water on the leaves properly when the weather is dry. Can not be exposed to the sun, one side burns the leaves, but the light is too weak to grow. The second point: because the root system of Fozhu Cymbidium is very shallow, when potted, it is generally necessary to win the tile cushion hole and cover it with a layer of cinder or coarse sand to increase air permeability. The third point: Buddha beads hanging orchids like warm and humid, the most suitable temperature is about 20 degrees Celsius to 28 degrees Celsius. Especially in the high temperature environment, it is necessary to boil water and fertilize. Conclusion: it is believed that we all have a better understanding of how to raise the Buddha-bead orchid. Buddha bead orchid is an oval spherical fleshy leaf, light green, alternate. Generally, the hanging beads in potted plants can be more than one meter long after three to four years, and they are green all the year round, which is deeply loved by family flower growers. If you want to know more about household plants, please continue to pay attention to love nests.

The Culture method of Cymbidium how to raise it

Flower bonsai net guide: Buddha beads hanging orchid is also known as pearl hanging orchid, or emerald beads, Buddha beads, lover's tears, named because it looks like a string of Buddha beads, Buddha beads hanging orchid not only looks beautiful, but also can purify the indoor air. Today, the Flower Bonsai Network will share with you an article about the breeding methods of Buddha beads and orchids. Let's take a look.

The culture method of Buddha bead orchid

The culture method of Cymbidium mandshurica 1: breeding method

Can be propagated by cuttings. Branches and vines are easy to take root and can be cut off in spring and autumn, half of which are buried in sand or loose soil, keeping moist but without stagnant water, and will soon take root for planting (about half a month in spring and autumn, while it is not easy to take root in winter and summer. This measure can be used to make up for the fact that the pot plants are not uniform and plump but grow too long.) Cymbidium can be propagated by ramets. Except that the winter temperature is too low to be suitable for ramet, it can be carried out in other seasons. Potted plants for 2-3 years, when changing pots in spring, the dense potted seedlings were removed from the old culture soil, divided into two to several clumps, and potted into new plants respectively. Cymbidium can also be propagated by small plants on the walking stem. In the growing season, the small plants on the stems are cut, planted in the culture soil or in water, and then transplanted into the basin after the small plants take root. In addition, seeds can be used for sowing, but they are generally rarely used.

The propagation method of Cymbidium is mostly cutting method, which can trim the branches and leaves, each section is 8mur10cm, and then insert it into the basin soil, half cover, the humidity is controlled between 50% and 60%, take root in 10 days to half a month, and then take good care of it in order to survive. At this time, it is most beneficial to plant growth to strictly control the amount of water and keep the pot soil in the state between dry and wet.

Detailed explanation of the culture methods of Cymbidium: 2: cultivation and management

Watering: Buddha bead hanging orchid likes a warm environment, drought resistance, can not withstand waterlogging, the principle of farming watering is that it would rather be dry than wet.

Fertilization: the maintenance of Buddha bead orchid should be thin and fertilizer should be applied frequently. Fertilizer should be applied frequently, but not too much at a time.

Detailed explanation of the culture method of Buddha bead orchid: 3: prevention of insect pests

There are few insect pests in the orchid, and the more common disease is the occasional aphid disease, which occurs in spring. When aphid disease is found, it can be killed with 500 times omethoate. There will be mites in class in summer, which can be killed by 1000 times of triclofenac.

When killing insects, we should pay attention to maintain the humidity of the page, can reduce insect pests, and ventilation facilities should also be in place.

[matters needing attention in the culture of Buddha-bead orchid]

1. The leaves are succulent and succulent, so they are resistant to drought. Watering should be better dry than wet.

2. The root system of Cymbidium is very shallow and can be planted in shallow pot. Generally use tiles to cover the bottom hole, and cover with a layer of cinder or coarse sand to increase air permeability and filtration, the soil is best to use rotten leaf soil, mixed with a certain amount of sand, the soil-to-sand ratio is about 1:3.

3. Phyllanthus angustifolia is warm and humid, cold-resistant and high-temperature resistant, and the optimum temperature is about 20 ℃ ~ 28 ℃.

4. "thin fertilizer" should be applied frequently in spring and autumn when the orchid is growing vigorously. Spraying 1-3 ‰ nitrogen fertilizer and potassium dihydrogen phosphate on the leaf surface is beneficial to make the pearl more green and fat and improve the ornamental value.

[how to put Buddha beads and orchids]

Put it in the kitchen to purify the air. Generally choose to put it to the north. Can reduce the cold.

Put in the bedroom can relax body and mind, maintain husband and wife harmony, and hanging orchid can also absorb formaldehyde.

How to raise the Buddha bead orchid? the culture method of the Buddha bead orchid

Buddha bead hanging orchid belongs to a kind of hanging orchid, its scientific name is jade bead, there is a very lovely name, called lover's tears, really like broken beads, very lovely. How to raise the Buddha bead orchid is not familiar to many people. This paper introduces the breeding method of the Buddha bead orchid.

The growth habit of Chlorophyllum

The Buddha-bead orchid native to southern Africa has a beautiful shape and is very suitable for ornamental plants. Its growth habit is warm and moist soil, can withstand drought, but not shade, and strong vitality, as long as give it a little water and nutrients, it can thrive. It does not require much light and can grow in strong light as well as in low light. The most suitable temperature for growth is between 15 and 25 degrees Celsius. Dry rather than wet is a key to the cultivation of orchid, too strong light will burn the plant, too weak light will lead to poor growth.

The culture method of Buddha bead orchid

1. Propagation method: the propagation method of Cymbidium is mostly cutting method, which can trim the branches and leaves, each section is 8-10 cm, and then insert it into the basin soil, half-covered, the humidity is controlled between 50% and 60%, and rooting in 10 days to half a month, supplemented by careful care, to survive. At this time, it is most beneficial to plant growth to strictly control the amount of water and keep the pot soil in the state between dry and wet.

2. Cultivation and management: dry rather than wet is a key point in the cultivation of Cymbidium. In addition, it is also extremely important to apply thin fertilizer frequently. The so-called dry rather than wet is because the orchid from southern Africa likes a warm environment and is more drought-resistant than waterlogged, so it would rather be placed in a dry environment than stunted by too much watering. On the other hand, the frequent application of thin fertilizer says that fertilizer should be applied frequently, but each time it is light fertilizer, and one time it can not be fertilized too much, which leads to problems in its growth.

3. Pest prevention: there are few insect pests in Buddha bead orchids, but this is still the case. Generally speaking, the most common disease of Buddha bead orchid is aphid disease, which occurs in spring. When encountering this kind of phenomenon, it should be killed with 500 times omethoate. And in summer there will be mites, which can be killed 1000 times with triclofenac. When pests, pay attention to increase the humidity of the page, can reduce pests, in addition, ventilation facilities should also be in place.

Points for attention in the culture of Buddha beads and orchids:

1. The leaves are succulent and succulent, so they are resistant to drought. Watering should be dry rather than wet in cultivation, which is one of the keys to success. When the weather is dry, you can spray water to the leaves and vines to make up for the lack of moisture and keep the beads green and full. Prefer semi-shade, sun exposure may burn beads, too weak light will not grow strong.

2. The root system of the plant is very shallow and can be planted in shallow pot. Generally use tiles to cover the bottom hole, and cover with a layer of cinder or coarse sand to increase air permeability and filtration, the soil is best to use rotten leaf soil, mixed with a certain amount of sand, the soil-to-sand ratio is about 1:3.

3. Sex is warm and humid, cold-resistant and high-temperature resistant, and the optimum temperature is about 20 ℃ ~ 28 ℃. Both high temperature and low temperature grow slowly, especially when the temperature is more than 30 ℃, it is almost dormant. Less watering and fertilization should be done, otherwise the roots are easy to rot, which is also one of the keys to successful cultivation.

4. In the spring and autumn when the growth is exuberant, "thin fertilizer" should be applied frequently. Spraying 1-3 ‰ nitrogen fertilizer and potassium dihydrogen phosphate on the leaf surface is beneficial to make the pearl more green and fat and improve the ornamental value.

The above is the introduction of the breeding methods of the orchid, and I believe you have a further understanding of how to raise the orchid. Buddha bead orchid is oval globular fleshy leaves, light green, alternate; flowers yellowish white or lavender, small and lovely. Generally, the hanging beads in potted plants can be more than one meter long after three to four years, and they are green all the year round, which is deeply loved by family flower growers.

 
0