[picture of duck foot wood] Culture methods and matters needing attention of duck foot wood

✾

Duck foot wood, also known as goose palm wood, is called Schefflera octophylla (Lour.) in Latin. Harms is a green plant type of angiosperm Araliaceae. Duck foot is common in tropical and subtropical evergreen broad-leaved forests, and this plant is also a nectar plant in winter in southern China. Its wood texture is soft, and it is a raw material for matchsticks and steamers. Leaves and root bark also have certain medicinal value, and can treat common diseases such as influenza and injury caused by falls.

The breeding method and matters needing attention of ✾ duck foot wood one, the way of reproduction. Duck foot wood is commonly used for cutting and sowing to reproduce, cutting propagation is generally carried out in April-September, we need to cut off the top branches of one-year-old duck foot wood, the length is about 8-10 cm, and then remove the lower leaves and put them in the sand bed and keep wet and control the room temperature. Sowing and propagation are generally carried out from April to May, and the suitable temperature for indoor pot sowing and germination is about 20-25 degrees. It is necessary to keep the potted soil moist and germinate 15-20 days after sowing. Second, light conditions. Duck foot wood likes to grow in a warm and humid environment and cannot be irradiated in the hot sun, which will lead to sunburn. Duck foot wood is a relatively shady plant, and it is best to give this plant some bright astigmatism during culture. and suitable for breeding in the courtyard and other well-ventilated and fertile soil and other environment. Third, water condition. Duck foot wood grows better in the environment of high air humidity and sufficient soil moisture, it should be noted that the potted soil can not be short of water, otherwise it will cause a large number of leaves of plants to fall off. it is necessary to properly control the amount of watering in winter under the condition of low temperature, at the same time, pay attention to drainage, and spray to the plant to increase humidity when the weather is dry.

Fourth, soil conditions. The soil of duck foot wood potted plant can be made of peat soil, rotten leaf soil plus perlite of 1 step 3 and a small amount of base fertilizer, or fine sand can be used as potted soil. If you grow indoors and see direct sunlight for about 4 hours a day, you can grow very well. It is a plant type that can be watched for a long time, and this plant will sprout every spring. We should change the pot and get rid of some of the old soil and use the new soil before sprouting. Fifth, fertilization and pruning. Yali pear wood should be applied liquid fertilizer once a week during the growing season, and 20% cake fertilizer should be applied twice a month from May to September. If the varieties of flowers and leaves have more nitrogen fertilizer and weak light, the patches on the leaves will not be obvious. When pruning, attention should be paid to turning pots before leaving the house in spring and proper pruning of plants. Plants that are too high can be retracted and trimmed, which is a good interior decoration. Sixth, pest prevention and control. Yali wood is mainly vulnerable to leaf spot disease and anthracnose. We can spray 1000 times of 401 color-acetic acid solution of 10% antimicrobial agent, and insect pests mainly include shell insects. Control needs to use 40% omethoate EC 1000 times, while red spiders, thrips and leaf moths can harm the leaves of pear wood, we need to spray 3000 times with 10% permethrin EC.

Conclusion: Yali wood is one of the plant types with ornamental and medicinal value. it can be used not only as a potted plant on the balcony, but also in the courtyard or doorway to purify the air, and it can also be used to treat some common diseases. the above is the introduction of the breeding methods and matters needing attention brought by the editor, hoping to help friends who like this green plant.

The breeding method of duck foot wood matters needing attention in duck foot wood culture

Duck foot is an evergreen shrub of Araliaceae with many branches, dense branches, palmately compound leaves and bright green leaves. The flowers are small, white, inconspicuous, fragrant and flowering between winter and spring. Because of its strong adaptability, low light environment, good beautification effect, and its leaves can absorb nicotine and other harmful substances in the air, it has become one of the most popular indoor potted plants in the world through photosynthesis, which is suitable for hotels, conference rooms, halls, families and so on.

I. the culture method of duck foot wood

Soil: soil can be cultivated with peat soil, rotten leaf soil with a little base fertilizer or sandy soil. To ensure good air permeability and drainage of the soil.

Temperature: the general growth temperature of duck foot wood is 15 mi 25 degrees Celsius. Leaves will fall off when it is less than 5 degrees Celsius, so pay attention to ventilation at ordinary times.

Lighting: duck foot wood is a semi-shade plant, there are four hours of direct sunlight every day, can not be exposed.

Watering: in spring, summer and autumn, water should be watered every 4 days, but not too much water. If water accumulates, it will cause root rot, but keep the soil moist. Watering decreases in winter, and the water temperature had better be similar to that of the soil.

Fertilization: duck foot wood mainly applies nitrogen, phosphorus and potassium mixed fertilizer, if it is a variety of flowers and leaves, if there is more nitrogen fertilizer and weak light, the plaques on the leaves will not be obvious.

Pruning: duck foot wood generally does not need pruning, if the leaves fall, the lower branches are lighter, and the upper branches can be cut off to promote the germination of new branches. What is cut can also be re-cut.

Second, the living habits of duck foot wood

Duck foot wood can be raised for a long time in a bright and ventilated home, which can be used for daily viewing. The plant can continue to grow when the growth temperature is 15-25 ℃ and not less than 5 ℃ in winter.

Duck foot wood has a strong adaptability, which can grow not only in high air humidity, sufficient soil and water, but also in dry environment. When old plants are cultivated indoors, large parts can be properly trimmed, or part of the roots can be cut off and replanted.

Matters needing attention in duck foot wood culture

Duck foot wood likes half-shade and can be watched for a long time in a bright and well-ventilated home. Such as indoor direct light for about 4 hours a day can grow well. Varieties with yellow and white markings, such as weak light or partial application of nitrogen fertilizer, will blur their markings and lose their original characteristics.

The suitable temperature for growth is 15 ~ 25 ℃, and the lowest temperature in winter should not be lower than 5 ℃, otherwise the leaves will fall off. New leaves will appear in the following spring. It grows well in the environment of high air humidity and sufficient soil moisture, but it has strong adaptability to the dry climate in the north. Pay attention to the basin soil can not be short of water, otherwise it will cause a large number of leaves to fall off. The water should be properly controlled under the condition of low temperature in winter. Liquid fertilizer was applied every 1-2 weeks in the growing season.

Change the basin every spring, if you use plastic containers, you should pay attention to drainage. The basin soil is prepared with peat soil, rotten leaf soil, perlite and a small amount of base fertilizer. It can also be potted with fine sand. Pruning does not require big pruning. If the lower leaves fall out and become bare poles, cut short from the upper half to promote the germination of new branches, the cut branches can also be cut, and after taking root, they will become new plants. if you do not want the duck foot wood to grow too high, you can wait until it grows to 30cm, that is, wipe the head, wipe off the top buds, and grow lateral branches over a period of time.

The above is the relevant introduction of this article, I believe you have a simple understanding of this after reading it, if necessary, you can continue to pay attention to the No. 1 home network to learn more information.

Culture methods and matters needing attention of duck foot wood

Duck foot wood is a very popular green plant in daily life. It not only has a beautiful and generous appearance, but also has a high status in fengshui, so it is especially suitable for breeding at home. The breeding method of duck foot wood is not complicated, but there are many places that need to pay special attention to in the process of breeding. I will take you to understand this knowledge.

The culture method of duck foot wood

1. Soil

At ordinary times, when raising duck foot wood, you must choose a suitable soil. This kind of plant likes the soil with deep and loose soil layer. When breeding at home, you can choose rotten leaf soil or peat soil as the substrate, and you can add about 1/4 of the garden soil or river sand. In addition, you should also apply an appropriate amount of cake fertilizer as the base fertilizer before planting.

2. Watering

It is very important to water duck foot wood well. This kind of plant is afraid of both dryness and waterlogging. Usually, it must be watered in time to keep the soil moist, but after entering the cold weather in winter, water absorption will slow down, and its growth rate will slow down. At this time, it is necessary to reduce water supply, and stagnant water must not appear in the flowerpot during breeding, otherwise its roots will rot, leaves will fall off, and duck feet will die in serious cases.

Matters needing attention in culture

1. Light regulation

Duck foot wood is a kind of green plant with strong vitality. it can grow normally as long as it has suitable soil and sufficient moisture, but it also needs to pay special attention if it wants to raise it well. This kind of plant likes to grow in a semi-overcast environment. Usually in its peak growing season, it can be placed indoors where there is scattered light, but after entering winter, it needs to be moved to the south window facing the sun. In the process of breeding, duck foot wood must not be exposed to direct sunlight, otherwise its leaves will fall off a large number, and the ornamental value will decline accordingly.

2. Temperature regulation

Breeding duck foot wood must pay attention to temperature regulation, the cold tolerance of this plant is very poor, winter can not be put in the environment of less than 10 degrees, otherwise its leaves will turn yellow, when the temperature drops below zero, duck foot wood will die, usually control the indoor temperature at about 20 degrees, its growth is the most exuberant. In addition, when raising duck foot wood, we should also pay attention to the supply of fertilizer, it should be fertilized once a week during the peak growing season, fertilizer can choose thin cake fertilizer or nitrogen fertilizer.