Do you want your succulent plants to live on the moon as the Mid-Autumn Festival approaches? Hand in hand to teach you how to make a simple and beautiful moon boat

During the Mid-Autumn Festival, succulent plants should also touch the joy of the festival. The moon boat is full of fragrance and sincere wishes.

Today we are going to teach you how to make a "succulent moon boat". In fact, as long as you get started, it's really not complicated!

I. preparatory work

Materials: horticultural plastic wire: 3. 2-3.8MM, 2.0MM

Aluminum wire: 3.5MM, 1.5MM; plastic beads with 1.5MM core

Tools: pliers, sharp-nosed pliers, round-nosed pliers, knives, soft rulers

Second, the manufacturing process: take the moon ship with the outer ring diameter of 30CM as an example

1. Outer frame: choose the plastic-coated wire of 3.8MM and use pliers to intercept the three segments of 97.2CM, 81.5CM and 65.8CM respectively. Use sharp-nosed pliers or knives to remove the plastic wrap parts at both ends that are about 2CM long, and hook them together. The length of the bent hook is about 1CM.

This process requires the use of pliers, which can only be completed with great effort (it is recommended to turn to a strong man at home) the three hooked circles need to be reshaped, that is, bend into a standard circle as far as possible: the finished diameters are 20CM, 25C and 30CM, respectively.

2, carpool: first fix the top of the moon ship, the order of the three circles is 20CM (ship back), 30CM (bottom), 25CM (ship face), the hook part will appear protruding when bundling, in order to bulge not obvious, to stagger three hook positions for binding, tie up the aluminum wire using 1.5MM.

3. Next, fix the bottom of the ship, using the plastic wire covered by 2.0MM, the intercept length is 29CM, the distance between the back and the bottom of the ship is about 10CM, and the distance between the bottom and the face of the ship is also 12cm; fix both sides of the ship from the top to both sides of the 13CM, and also use the plastic wire of 2.0MM

4. Setting: the above four positions are tied and fixed, and the whole hull is reshaped, so that a complete main frame of the moon ship is completed.

5. Weave the net: using the simplest fishing net weaving method, start knitting from one side of the hull, intercept 1.5MM aluminum wire length of about 1.4m, a total of 6, the starting end, equidistant fixed on the boat frame, and then adjacent 2 kink, twist 2 buckle, and so on, the size of the hole can be evenly controlled as far as possible

6. in the process of knitting, attention should be paid to the shaping of the hull, not too tight or too loose, so as not to deform the hull until it is complete, or six aluminum wires.

7. Plastic surgery: make it look more like a moon ship, it's done!

The production of the upgraded version of the moon ship: take the production of the moon ship with the outer ring diameter of 25CM as an example

It will be more exquisite to choose all black material or all white material.

(1) the production of the outer frame is the same as above

(2) carpool: the top is fixed as above, but the top decoration is added; the bottom and two side link patterns are made (the specific size can be measured and adjusted by yourself). After the pattern is done with 2MM plastic wire, the 1.5MM aluminum wire is fixed on the ship frame, and the length of the aluminum wire used for interception and binding is all 8CM length, so that each node is of the same size and more beautiful.

(3) mesh weaving: this process can be diversified, but it is basically a heart-shaped, Phoenix-tail and size S-shaped pattern, which is made of 3.5MM aluminum wire and 1.5MM aluminum wire, and suitable beads can be put on the center of the pattern coil, and the pattern can be made according to the size required for each position of the hull, and the aluminum wire of 8CM length is also used for binding and fixing.

(4) reinforcement: making patterns with 3.5MM aluminum wire can make the hull look more stable, the lines are more beautiful, the pattern density can be freely controlled, and the self-estimated density is enough to support the contents.

(5) plastic surgery, it's done!

Third, at the bottom:

Coconut palm can be used, or sand net cloth and water table can be used to cover the bottom, cut properly according to the shape of the moon boat, and the bottom can be sewn. If the bottom is unstable, the aluminum wire of 1.5MM can be used for multiple fixing.

Fourth, plant succulent plants:

At this time, you will find that the moon boat designed in this size is more convenient to grow and watch, because the back of the ship is high and can be planted at two or three different heights, isn't it? OK, the use of general succulent soil can be, tidal soil planting, do a good plant collocation, hanging in a ventilated sunshade position, slow root service boat, become!

Click to read the original text and enter the succulent mall immediately