MySheen

Management techniques of interplanting Pleurotus ostreatus with cucumber

Published: 2024-11-06 Author: mysheen
Last Updated: 2024/11/06, When the temperature in the greenhouse is strictly controlled, the temperature in the greenhouse should be controlled at 20 ℃ ~ 30 ℃ in the daytime and more than 10 ℃ at night. When the daylighting is not enough in cloudy days, when the shed temperature is low, it is necessary to appropriately use electric lamps to increase the lighting and temperature at night, and install a 100-watt bulb every 6 meters. As the cultivation of Pleurotus ostreatus on the ground, mainly affected by the ground temperature, therefore, the shed.

When the temperature in the greenhouse is strictly controlled, the temperature in the greenhouse should be controlled at 20 ℃ ~ 30 ℃ in the daytime and more than 10 ℃ at night. When the daylighting is not enough in cloudy days, when the shed temperature is low, it is necessary to appropriately use electric lamps to increase the lighting and temperature at night, and install a 100-watt bulb every 6 meters. As the cultivation of Pleurotus ostreatus on the ground is mainly affected by the ground temperature, as long as the temperature in the greenhouse is not too high or too low, it generally will not affect the yield of Pleurotus ostreatus. A correct grasp of humidity and humidity in the shed should generally be kept at 60% to 80%. After watering or spraying, if the outside temperature is higher, it can be properly ventilated. When intercropping, the hyphae of Pleurotus ostreatus can absorb underground water, and the amount of water sprayed should be 1 × 3 less than that of ordinary mushroom, and as long as the soil is wet. Rational fertilization of cucumbers should be regularly applied with micro-fertilizer during watering. After the three-tide mushroom, the cucumber leaf surface and the bed surface of Pleurotus ostreatus can be sprayed with 0.2% potassium dihydrogen phosphate and 0.5% urea solution. In order to prevent diseases and insect pests, remove the mushroom root and dead mushroom in time during the period of stopping mushroom production, flatten the material surface, and then fully spray insecticidal fungicides. Try not to use drugs, especially fungicides, during mushroom emergence to prevent damage to the mushroom body.

 
0