How does fragrant wood reproduce? Introduction to the Propagation method of Fragrance Wood

Qingxiang wood is a positive tree, but it is also slightly tolerant of shade, likes warmth, requires deep soil layer, strong germination, slow growth, long life, but the cold resistance of seedlings is not strong, and needs to be protected in North China. Plants can withstand-10℃ low temperature, like sufficient light, not easy to accumulate water soil, Qingxiang wood usually uses sowing propagation and cuttage propagation, let's take a look at the propagation method of Qingxiang wood!

Sowing and propagation of fragrant wood

The mature period of seeds is very close to the scattering period. When they mature, they fall off in case of wind and rain, and are not easy to collect, or they are pecked by birds and animals. When the seed begins to appear mature signs, the seed shall be collected from the tree in time. The seed of Qingxiang wood is wrapped in juicy pulp and is easy to be polluted and moldy. The collected seed must be prepared immediately: the fruit shall be piled up, the peel shall be smashed, the water shall be washed, the impurity shall be threshed and dried in the shade, and the stored in a ventilated and dry place.

1, sowing season: spring and autumn can be, generally autumn germination rate is higher than spring sowing. Before sowing, the selected seeds are soaked in warm water at an initial temperature of about 20 DEG C for 24 hours, the seeds absorb water and expand, and are taken out and placed under warm and humid conditions for germination. Generally, the seed amount per mu is 6 kg.

2. Precautions

① Fear of waterlogging: The soil should be kept dry and loose as much as possible, and generally not watered or watered as little as possible.

② Fear of shade: seedlings should be thinned in time to increase the transparency of seedlings and ventilation.

③ Fear of fertilizer damage: Qingxiang wood is sensitive to fertilizer, and the seedlings should be fertilized as little as possible or not fertilized, so as to avoid excessive fertility, resulting in seedling burning or excessive growth.

Cuttage propagation of Aralia fragrans

Spring and autumn can be cuttage, in the rest of the trees, select the mature mother tree 1-year healthy branches, cut into 10 ~ 15 cm long cuttings, the upper incision from the bud 1 ~1.5 cm, the lower cut from the bud 0.3 ~ 0.5 cm. The medium with good permeability, medium water holding capacity and neutral or slightly acidic pH value was suitable for cuttings.

Before cutting, the substrate should be disinfected. Soak the base of cuttings with ABT rooting powder (use according to instructions). Immersion time is 12~24 hours. Trenching and planting, cutting into soil about 2/3. Cover plastic film after insertion, improve air humidity, fine management before rooting, rooting begins about 45 days.

How does the tree grow?

Fragrant wood because of its leaves can emit a faint fragrance and named. Do you know how the trees grow? Let's take a look at the breeding methods of Qingxiang Wood.

1, sowing and reproduction: Qingxiang wood seed maturity and scattering period is very close, once mature, in case of wind and rain that fall off, not easy to collect, or by birds and animals pecking. When the seed begins to appear mature signs, the seed shall be collected from the tree in time. The seed of Qingxiang wood is wrapped in juicy pulp and is easy to be contaminated and moldy. The collected seed must be prepared immediately: the fruit shall be piled up, the peel shall be smashed, the water shall be washed, the impurity shall be threshed and dried in the shade, and the stored in a ventilated and dry place.

Sowing season: spring and autumn can be, generally autumn germination rate higher than spring sowing. Before sowing, the selected seeds are soaked in warm water at an initial temperature of about 20 DEG C for 24 hours, the seeds absorb water and expand, and are taken out and placed under warm and humid conditions for germination. Generally, the seed amount per mu is 6 kg.

Seedling management precautions: Qingxiang wood seedlings have three fears: one is afraid of waterlogging. The soil should be kept as dry and loose as possible, and generally not watered or watered as little as possible. The second is fear. Seedling should be timely thinning seedlings, increase seedling transmittance, ventilation and ventilation. Third, fear of fatness. Qingxiang wood is sensitive to fertilizer, so the seedlings should be fertilized as little as possible or even not fertilized, so as to avoid burning seedlings or excessive growth due to excessive fertility.

2, cuttage seedlings: Spring and autumn can be cuttage. In the period of tree rest, select 1-year strong branches of mature mother trees, cut them into cuttings with length of 10 ~ 15 cm, the distance between upper incision and bud is 1 ~1.5 cm, and the distance between lower incision and bud is 0.3 ~ 0.5 cm. The medium with good permeability, medium water holding capacity and neutral or slightly acidic pH value was suitable for cuttings.

Before cutting, the substrate should be disinfected. Soak the base of cuttings with ABT rooting powder (use according to instructions). Immersion time is 12~24 hours. Trenching and planting, cutting into soil about 2/3. Cover plastic film after insertion, improve air humidity, fine management before rooting, rooting begins about 45 days.

How do trees reproduce? The reproduction method of Qingxiang wood

Fragrant wood can purify the air, mosquitoes drive flies, is a very suitable for indoor potted plants. I believe many flower friends will have an idea when watching their own fragrant wood grow up day by day. How can a variable plant grow? Then, let's introduce the breeding method of Qingxiang Wood to everyone.

Picture: Cutting propagation method of Qingxiang wood

1. Cutting propagation method of Qingxiang wood

Fragrant wood cuttings can be carried out in spring and autumn, flowering is in spring.

In the dormancy period of Fraxinus fragrans, we can choose the 1-year healthy branches of the mature mother tree, cut them into 12-15cm cuttings, and have a certain distance from the buds (the upper incision is 1~ 1.5 cm away from the buds; the lower incision is 0.3~ 0.5 cm away from the buds).

It is recommended to select soil with good permeability, medium water holding capacity and neutral or slightly acidic pH value for cutting propagation. It is recommended to use permeable river sand or pearlite with high success rate.

Picture: Sowing and breeding method of Qingxiang wood

2. Seed propagation method of Qingxiang wood

Sowing fragrant wood seeds is best carried out in autumn, spring is also possible. According to Xiao Bian's recommendation, autumn sowing has a higher success rate than spring.

First of all, the acquisition and treatment of seeds: the mature period of seeds of Qingxiang wood is very close to the scattering period. Once mature, they will fall off when encountering a little trouble, which makes it difficult for us to collect them, or they will be eaten by birds and animals. Therefore, when seeds begin to show signs of maturity, they are immediately removed from the tree and processed. Fragrant wood seeds wrapped in juicy pulp, susceptible to moldy pollution, the fruit should be retting, and mashed peel put in water washing. After threshing and discarding impurities, dry in the shade and store in a ventilated and dry place.

The seeding process of Qingxiang wood is very simple. Before sowing, the seeds are soaked in warm water at an initial temperature of 20 degrees Celsius for one day (24h). After the seeds are absorbed and expanded, they are taken out. Germination is performed under warm and humid conditions. After sowing, you can!

The propagation method of Qingxiang wood is introduced here. Cutting propagation and seeding propagation are the propagation methods of Qingxiang wood with high success rate. All flower friends should quickly move their hands and make the idea of a variable plant become a reality.