MySheen

How to water Lentinus edodes in spring?

Published: 2024-11-09 Author: mysheen
Last Updated: 2024/11/09, How to water Lentinus edodes in spring? Please guide the stick cultivation of Lentinus edodes to produce mushrooms in autumn and winter, and the water content will be reduced. In order to increase the yield of Lentinus edodes, rehydration treatment is needed. There are two kinds of water replenishment methods: water injection method and immersion method. The stick in the mushroom bed does not move on the spot, use.

How to hydrate mushrooms in spring? Please instruct the mushroom rod of rod culture to produce mushrooms in autumn and winter, and the moisture content will decrease. In order to increase the yield of shiitake mushrooms, water treatment is needed. There are two methods of water injection and immersion, water injection method is mainly introduced. The mushroom beds are fixed on the spot, and plastic pipes with a diameter of 2 cm are installed along the beds. A main water pipe is arranged in the middle of the mushroom beds, and small water pipes are branched from the main water pipe. The length of the small water pipes is about 50 cm, and No.12 needles are installed on them to control the water flow. Water is supplied from the main and sealed at the other end. The water container is about 2 meters higher than the bacteria rod, so that the water flow has a drop pressure. When injecting water, the center of the bacteria rod is inserted with an iron rod with a diameter of 6 mm. The hole depth is about 3/4 of the height of the bacteria rod. It cannot be inserted to the bottom to avoid water loss. Because the flow is controlled by the needle, the dripping water bacteria rod can be absorbed and not overflow. Generally, it can be replenished in 15 minutes. Water supplement, covering with film, controlling temperature between 20℃ and 22℃, air exchange 1~2 times a day, 1 hour each time, water injection provides sufficient water for bacteria rod, and increases humidity difference and temperature difference at the same time, mushroom buds begin to appear after 6 days, mushroom tide is obvious, fruiting body distribution is uniform, when temperature rises above 23℃, primordium formation is inhibited, cold water should be sprayed at low temperature in the morning to stimulate bacteria rod to form primordium and produce another batch of mushrooms, Due to the temperature increase and the lack of nutrients in the fungus rod, the hypha is weak and has no vitality, and the fungus rod cultivation can be ended. Click for more cultivation techniques of mushroom Click for more cultivation techniques of edible mushroom

 
0