Equipment management system of sheep farm

The equipment of large-scale sheep farm mainly includes forage, feed storage, processing equipment, artificial insemination equipment, veterinary diagnosis and treatment equipment, feeding trough, drinking water equipment, office equipment, medicine bath equipment, fence equipment, weighing equipment, transportation equipment, slaughtering, segmentation, storage equipment and so on. In the process of sheep production, it is necessary to select equipment reasonably, use equipment economically, maintain equipment in time, and constantly strengthen the comprehensive management of equipment. The equipment used should be maintained and repaired in order to slow down the wear and tear of the equipment, find and deal with the abnormal phenomena in the operation of the equipment in time, avoid accidents, improve the utilization rate of the equipment and improve the economic benefit of the sheep farm.

Equipment maintenance of sheep farm

Cleaning, inspection, cleaning, lubrication, fastening, adjustment and anticorrosion of mechanical equipment are generally called equipment maintenance or equipment maintenance. Its purpose is to slow down the wear and tear of the equipment, find and deal with the abnormal phenomena in the operation of the equipment in time. Most enterprises adopt the "three-level maintenance system", that is, "daily maintenance" (referred to as "daily insurance"), "primary maintenance" (referred to as "primary maintenance") and "secondary maintenance" (referred to as "second insurance") system.

1. Daily maintenance: the main content of daily maintenance is to clean and lubricate, fasten the screws that are easy to loose, check the condition of parts and components, etc. The maintenance items and parts are less, and most of them are on the outside of the equipment, which are borne by the operators and used as the inspection content during the shift.

2. First-level maintenance: the main content of the first-level maintenance is to partially disintegrate and clean the parts, adjust the fit gap, remove oil stains and dredge the oil path, clean the motor and electrical equipment, clean the accessories, etc. First-level maintenance is generally undertaken by operators under the guidance of full-time maintenance workers, and the maintenance items and parts are more than daily maintenance.

3. Secondary maintenance: the main content of secondary maintenance is to disintegrate, check and clean the equipment, repair or replace vulnerable parts, partially restore the accuracy of the equipment, overhaul the electrical system, and so on. There are many inspection and maintenance items, which should be carried out regularly and are generally undertaken by full-time maintenance workers.

Maintenance of equipment in sheep farm

The maintenance of mechanical equipment refers to the repair of equipment damage caused by normal or abnormal reasons. The essence is the compensation for material wear (including corrosion and aging). The basic means of repair are repair and replacement. Through repair and replacement, the efficiency of the equipment can be restored. At present, there are three kinds of equipment maintenance systems implemented in our country.

1. Planned repair: the planned preventive repair system is to maintain, inspect and repair the equipment according to the general wear law and technical status of the equipment and according to the scheduled repair cycle and its structure. an equipment maintenance system that ensures that the equipment is always in good technical condition. Its main contents include: daily maintenance, regular inspection, planned repair (minor repair, medium repair, overhaul).

2. Maintenance and repair system: maintenance and repair system is an equipment maintenance system composed of certain types of maintenance and certain types of repairs. It is characterized by breaking the absolute division of labor between operators and maintenance workers, allowing operators to undertake the maintenance of equipment (such as the first-level maintenance in metal-cutting machine tools), and specifying and institutionalizing operators' participation in the management of equipment. At the same time, the policy of giving priority to prevention has been further implemented.

3. Preventive maintenance system: preventive maintenance system is a comprehensive maintenance system based on the theory and law of equipment failure and combining preventive maintenance with production maintenance. Preventive maintenance is the early detection and early diagnosis of abnormal equipment from the point of view of preventive medicine. Production maintenance system is the most economical maintenance method to improve the production efficiency of equipment. Preventive maintenance system can reduce the number of failures and shorten the repair time. The preventive maintenance methods of equipment mainly include daily maintenance, post-maintenance, preventive maintenance, production maintenance, improvement maintenance, maintenance prevention and predictive maintenance.

Transformation of equipment in Sheep Farm

Any equipment has a certain life cycle, and the equipment should be updated at the end of the life cycle. Under the situation of the rapid development of science and technology, in order to continuously improve the market competitiveness of enterprise products, enterprises must also carry out timely equipment transformation.

1. Equipment transformation is not only the need of the rapid development of science and technology, but also the inevitable trend determined by the invisible wear of equipment. Through the transformation of equipment, we can improve product quality, upgrade products, save energy, protect the environment, improve working conditions, promote the use of new technologies, new processes and new materials, and expand the production scale and production capacity of enterprises. the purpose of changing the technical appearance of the existing equipment and improving the modernization level of the equipment.

2. There are many ways to transform the equipment due to the different needs of enterprises and the different technical status of the equipment. For example, the modification of the equipment is to change the capacity, power, volume and shape of the equipment in order to meet the output and processing requirements, improve the material and manufacturing quality of the equipment parts, and improve the reliability and precision of the equipment.

3. The equipment transformation is carried out on the basis of the original equipment, so it has the advantages of less investment, less time-consuming and quick results, which is very suitable for enterprises to continue to invest and transform in the case of shortage of funds. Equipment transformation is of great significance for gradually improving the technical level of equipment, improving the competitiveness and economic benefits of enterprises.

Renewal of equipment in sheep farm

Equipment renewal is to replace the old equipment that can no longer be used, economically unsuitable and technologically backward with new equipment that is more advanced in technology and more cost-effective in economy.

1. There are two types of equipment updates: prototype update and technology update. The former is the replacement of the same type of equipment, which generally can not greatly improve the economic benefits of the enterprise, and often lead to the technological stagnation of the enterprise. The latter is to replace the old equipment with more technologically advanced and economically reasonable new equipment, which is the main connotation and direction of equipment renewal.

2. the scope of equipment updating, including the updating of production process equipment, auxiliary production equipment, testing means, etc. In the renewal work, the first priority should be given to the equipment that is seriously damaged or whose performance and accuracy can no longer meet the process requirements, or the equipment with frequent maintenance and high maintenance cost. or the equipment that wastes a lot of energy and raw materials and the key equipment with good benefit and quick effect.

3. Equipment renewal has a great impact on the development strategy and policy of the enterprise, and the amount of investment is relatively large, so it must be both positive and prudent. For this reason, we must strengthen investigation and research, carry out comprehensive planning, closely combine the equipment renewal work with the enterprise's technological transformation plan, and choose the best scheme through careful technical and economic demonstration.