The cuttings of these 15 kinds of flowers are now too simple to take root in a week and become big in a second.

"

Flowers and plants cutting

"

-mint-

The cutting of peppermint is relatively simple, cut off the slightly older branches of about 10 centimeters, cut off the leaves at the bottom, and grow roots in the water for a few days, or directly into the loose soil, first in a cool place for maintenance, and then normal maintenance after a week.

-crab claw orchid-

Crab claw orchids can be cut after Xie, cuttings do not choose too tender leaves, cut directly from the stem nodes, dry for 1-2 days. Find some loose nutritious soil, insert the leaves into the basin soil, pour a little water, put them in a semi-shady place, and maintain them normally in about 2-3 weeks.

-longevity flowers-

The cutting of longevity flowers is also relatively simple, choose some more mature fleshy stems and dry them. Insert it in plain sand or nutritious soil, water it and put it in a semi-shady place at a temperature of 15-20 ℃. It can take root in about 3 weeks. Some fallen leaves can also take root and sprout in the soil, and small buds can grow from the petiole.

(longevity Flower Bar Meng Siyuan)

-Ivy-

Cut off the ivy branch 10cm or so, with air root is the best, cut off the bottom leaves, inserted into the loose and breathable basin soil, placed in a semi-shady place to maintain, pour water, generally 20-30 days after insertion can take root and survive.

-Tiger tail orchid-

Cut the tiger tail orchid into small sections around 10cm and dry it first. Then insert into the plain sand, pour water thoroughly, pay attention to the pros and cons, do not invert. It can take root in a month or so, and after growing 2-3 leaves, it can be put on the pot. The cuttings of tiger tail orchid will make the stripes of Phnom Penh disappear and become ordinary tiger tail orchid.

-Camellia-

Generally choose healthy and full semi-mature branches of the same year as cuttings, 8 cm long and 10 cm long, leaving 2 leaves at the apex. When cutting, the base takes a little old branch as far as possible, it is easy to form callus after insertion, and the root is fast. To cut along with the cutting, insert about 3 cm into the substrate, the leaves are required to hand over each other when cutting, and press with your fingers after cutting. It is better to insert it shallowly, so that it can heal and take root quickly.

The matrix generally uses plain sand or perlite. Attention should be paid to exposure and disinfection before use, or hot water should be used for disinfection.

The inserting bed should be shaded and covered with film, spray the leaf surface every day, keep it moist, and keep the temperature at 20-25 ℃. When cutting, the rooting powder was dipped in the base of the cuttings for 2-5 seconds, which had an obvious effect on promoting rooting.

It began to heal about 3 weeks after insertion and took root after 6 weeks. Transplant into a pot when the root is 3-4 cm long.

(Chinese Camellia Bar Huang Jinzhai)

(Chinese Camellia Bar Huang Jinzhai)

-Rose-

Select Lao Nen's appropriate strong rose cuttings that have flowered in the same year, cut at the bottom, leaving 2 bud points, preferably with a heel, and retain 2-4 leaves. Soak and disinfect with carbendazim and disinfect the river sand in advance. Insert the branches around the 1cm in the sand and put them in a larger water container.

(rose bar hanwym)

-Gardenia-

Gardenia cutting is also relatively simple, choose semi-lignified development of full twigs, cut into 10-15 cm long, leaving two leaves. The bottom was soaked with rooting powder, and the cuttings were cut in acid soil with strong water and fertility conservation. It could take root about 1 month after cutting and transplant after 50 days.

-Fugui bamboo-

Rich bamboo takes root quickly when the temperature is high. Cuttings should be cut obliquely, which can increase the water absorption area and speed up the rooting of rich bamboo. Cut off the leaves in the bottle to prevent long-term airtight rot from affecting plant growth.

The water level is generally controlled at about 3-4 knots above the incision, about 1x3 water. If it is tap water, it is better to put it for one day before using it.

Put it in a cool place with scattered light, do not bask in the sun. Do not move the position, change the water every 2-3 days, usually grow new roots in about 20 days, and apply a small amount of nutrient solution after growing new roots. During this period of time, there may be some lethargic, yellow leaf phenomenon, which is taking root and adapting to the new environment, is normal.

-Rubber tree-

The cutting basin soil can use plain sandy soil or vermiculite, and the middle branch of two-year-old semi-lignified cuttings should be selected, and the survival rate can reach more than 90%. In order to prevent the flow of too much milk from the cutting mouth and affect the survival, the village should be sealed with plaster or plant ash immediately after cutting. The length of cuttings is based on the retention of three buds, cut off the lower leaf, close the upper two leaves, and tie them with thin plastic rope to reduce leaf evaporation.

The suitable temperature for rooting is 18-25 ℃, water is often sprinkled to the ground to increase air humidity, shading and ventilation are done, it can take root in about 2-3 weeks, put in a slightly shaded place after pot planting, and then gradually increase the light after the new buds germinate.

(rubber Tree Bar listens to ing blossoms)

-hydrangea-

The cutting medium uses peat and perlite and once filled with water to keep the substrate moist. Select the current year's twigs, cut the branches into the following picture, a pair of leaves, and then cut off half of each leaf to reduce water evaporation, cuttings length 5-7cm.

After inserting, pour water thoroughly, put it in a cool and ventilated place, spray water to moisturize every day, and it will take root in a month or so.

(Hydrangea Coaee)

-Jasmine-

Select mature 1-year-old jasmine branches, cut into cuttings with more than two nodes, remove the lower leaves, insert them in the bed with half of the sediment, cover with plastic film, maintain high air humidity, and take root in about 40-60 days.

The cuttings have 3 sections, and the lower cut 0.5 cm away from the leaf node is the best, which is easy to take root. To reduce evaporation, leave 2 leaves in the whole strip and cut off half of them.

It basically took root in about 21 days, and was watered thoroughly after transplanting.

(the above picture of jasmine is from Ailan of Ta Hua Xing's life.)

-Green pineapple-

Green pineapple cutting is very simple, as long as the temperature is right, there are two kinds of cuttings throughout the year, soil cutting and water cutting. Prepare the nutritious soil and sterilize it in the sun.

Choose a strong vine with air root as the cutting mother, with air root can greatly shorten the rooting speed, cut the branches section by section, each branch is about 10cm, leaving 1-2 leaves, 1 bud point, the cut as far as possible to avoid the air root, the lower end is cut at an oblique angle of 45 degrees, it is best to be smooth. After the branches are inserted, water them thoroughly and place them in a cool and ventilated place. It is necessary to keep the soil moist and high air temperature. It usually takes more than 10 days to take root.

-hanging orchid-

Cymbidium is very easy to reproduce, cut the clustered stems and leaves on the stolon (actually a new plant larva, with leaves on the top and air roots at the bottom), plant it directly in a flowerpot and keep it in a shady place. Be careful not to bury it too deep when cutting, or it will break your heart.

(hanging Orchid Bar Ma Cui er)

It can also be cut directly and put into a hydroponic container, and it can take root very quickly.

-Douban Green-

Cut the sturdy green branches or leaves of bean pea and insert them in perlite or vermiculite at a tilt of 45 degrees. Keep the basin soil moist. Keep the temperature above 20 ℃ and take root in about 15-20 days. Three new blades are grown and they can be maintained normally.

Douban green can also be inserted into leaves and survive.

(Douban Green Bar Ice and Snow Xiaohan 668)

-succulent leaf insert-

Choose healthy succulent leaves, do not use water, dead leaves. Succulent leaves can be cut off for 4-5 days, so succulent leaves will be easier to break off. Do not pull the leaves bluntly, pay attention to the integrity of the growth point. Damaged leaves are difficult to sprout in long roots, so we should pay attention to them in the process of breaking.

(complete bud point)

(torn bud point)

Flat on the soil, watering attention can not be poured on the succulent surface, can be poured in the leaves seam. If there is water on the leaves, it can be dried with a paper towel. Put it in a cool environment without direct sunlight and wait for it to take root.

Cutting is actually not difficult.

Now breed a little, you have also become a big family!

Come and try it.

After reading it, let's show it to the flower friends in need.