The two buttons on the toilet tank turned out to be used in this way. I don't know how much water has been wasted over the years.

For example, every household has installed a toilet, and the toilet has gradually become an indispensable object in our daily life.

I wonder if you have noticed a round button on the top of the toilet when using the toilet. This button is divided into one big and one small. In the past, Huahua did not know why there were two buttons. Only recently did I know that these two buttons have different functions!

Huahua is afraid that everyone has been using the toilet for a long time, but she doesn't know the correct use of these two buttons, so she hastens to share them with you.

It turns out that these two buttons, one big and one small, are actually aimed at the different needs of us humans to go to the toilet. The big button has a large flow, while the small button has a small flow. Will you understand better if you say so?

So when we use the toilet, we have to choose the size of the button according to our own situation. If the button is not used correctly, the most direct result is a waste of water resources, now that water resources are so scarce, we can save a little bit, but don't waste it.

Friends who are recently decorating or buying toilets should note that not all toilets on the market have two buttons, some toilets have only one button, this kind of toilet has only one amount of water, it is very likely to waste water resources.

There are always a lot of problems large and small when using the toilet. Huahua will talk about it for you today.

1. The flushing toilet cannot flush or the amount of flushing is not enough.

At this time, first check to see if the hole around the edge of the drain and barrel is blocked, and if so, just clean it up in time.

If not, see if the amount of water in the tank in the toilet is not enough. We can bend the skin upward by a small margin to raise the water level in the tank.

Another possibility is that there is a leakage at the joint of the water tank and the bucket tank, at which time we can tighten the nut of the overflow pipe.

two。 There will be a noise when the water tank flushes

This situation is usually caused by a problem with the operation of the floating ball valve in the toilet. We can replace the gasket or install a new floating ball valve. If it is not the floating ball valve, it should be the reason why the water supply pipe is not running smoothly. At this time, you can check whether the water valve is fully open.

3. The water in the toilet tank flows all the way to the urinal.

When this happens in the toilet, there is usually a problem with the water intake. If you encounter such a problem, you can replace the water intake, or reassemble it.

Do you know about the two buttons on the toilet with the popular science today? Finally, I hope everyone can choose the toilet according to the demand, save water resources, everyone has the responsibility!