Cutting methods of Common Flowers in Family

Hanging orchid

Cutting time: spring, summer, autumn

Cutting temperature: 15-25 ℃

Cymbidium cutting is very easy, four seasons can be carried out, but mainly in spring, summer and autumn.

1. When cutting, you can cut the clustered stems and leaves on the stolon of Cymbidium. In fact, it is a new larva of Cymbidium, with leaves above and aerial roots below.

2. Plant it directly into a flowerpot, pour water through it and plant it in a cool place.

Note: be careful not to bury it too deep when cutting, otherwise it is easy to break your heart.

Cutting orchid

Ivy

Cutting time: April-May, August-September

Cutting temperature: 15-28 ℃

Ivy can be cut when it enters the growing season, but it is not suitable for cutting when it is dormant when it is hot in summer.

1. Cut the Lignification branches of the current year and cut them into cuttings of about 15cm and 20cm.

2. Remove the lower leaves of the cuttings, leaving only 2 or 3 leaves in the upper part.

3. Insert the cuttings into a loose and breathable medium, pour water through, and place them in a cool place.

4. Always keep the soil moist after cutting, and the plant can survive in about three or four weeks.

Ivy rooting by cuttings

Green pineapple

Cutting time: April-August

Cutting temperature: 15-28 ℃

The cuttings of green pineapple must be familiar to everyone, and they can be cultured in water or soil when cutting. Green radish can be cut all the year round, but the best time is from April to August.

1. Hydroponic cuttings can be exposed to tap water for 24 hours in advance, cut 10-20 cm cuttings, remove redundant leaves, retain two or three leaves, and put them directly into hydroponic containers. Water can be changed every two to three days, and new roots can grow in about ten days.

2. When cutting in soil culture, take 15-30 cm as a cuttage, remove the leaves on 1-2 nodes, choose loose and breathable sandy loam, pay attention to do not hurt air roots when cutting, maintain high air humidity, about three to four weeks can take root.

Green apple water insert

Rooting of green radish soil

Geranium

Cutting time of geranium: spring and autumn

Cutting temperature: 13-18 ℃

Cutting method of Pelargonium:

1. Select the top cuttings of about 10 cm (exuberant growth and easy to root) when cutting.

2. Loose and breathable sandy loam is the best cutting substrate for ‍.

3. The cuttings that have just been intercepted can be left in a cool place to dry for a period of time, and the cuttings can be cut after the wound recovers, so as to avoid the rot caused by wound infection.

4. The cutting ‍ cutting temperature is kept at about 13-18 degrees, and it can take root in about two to three weeks.

Geranium cuttings

Pelargonium cuttings

Longevity flower

Cutting time: spring, autumn

Cutting temperature: 15-20 ℃

The best period for longevity flower cutting is May-June or September-October every year. Cutting can be combined with post-flowering pruning.

1. Choose a strong fleshy stem, cut it into 5-6 cm cuttings, and insert the cuttings into the substrate.

2, do not bury the leaves, then pour enough water, put in a cool place, later management watering pay attention to dry wet, rather dry wet, so as not to rot fleshy branches.

3. It can be bagged and moisturized when the weather is dry, and the room temperature is kept at about 15-20 degrees.

4. It can take root in two to three weeks, and can be put on the basin after about a month, and then normal maintenance and management can be done.

Cuttings

Cuttage

Sunflower

Cutting time: spring and summer

Cutting temperature: 15-28 ℃

Sunflower is definitely an entry-level flower, and it is the easiest to cut in the growing season.

1. When cutting, cut 4 to 5 cm cuttings

2. Bury the cuttings directly into the soil (loose requirements for cutting substrates)

It will survive in one or two weeks, and then it will bud and blossom, and the sense of achievement will come quite quickly.

Cuttings

Cuttage

Hydrangea

Cutting time: plum rainy season

Cutting temperature: 13: 18 ℃

Hydrangea cuttings are easy to be carried out during the rainy season:

1. Cut off the top twigs and cut off about 20 cm.

2. Remove the lower leaves of the cuttings and keep 2-3 leaves on the top.

3. The cutting substrate must be loose and breathable, mainly peat perlite.

4. Keep the humidity after cutting, and it can take root after about two weeks.

Cut hydrangea cuttings

Cuttings treatment

Cuttage

A string of red

Cutting time: July to August

Cutting temperature: 15-28 ℃

A bunch of saffron is generally propagated by sowing, but the cutting method is also applicable.

1. Cut off the sturdy and pest-free branches as cuttings, with a length of 7cm and at least two nodes.

2. All the leaves at the base of the cuttings were removed, leaving only the upper leaves.

3. Insert cuttings into river sand or vermiculite.

4. Pour thoroughly water into the shade net or cool to keep the soil moist all the time.

About 15 days after a string of red can take root, immediately after taking root on the pot.

Douban green

Cutting time: early spring, late autumn

Cutting temperature: 15-28 ℃

Douban green is a common indoor small potted plant, which is not only simple to maintain but also very simple to reproduce.

1. Cutting substrate: River sand and peat can be selected. Perlite and other materials.

2. In the peak growing season of Douban green, cut the leaves or stems and insert them into the substrate after drying.

2. Water thoroughly and put it in a cool place to wait for it to take root.

Green leaf cuttings of Douban

Green stem cuttings of bean pea

Beautiful Sakura

Cutting time: about 5-6

Cutting temperature: about 15 ℃

1. The branches of the cherry trees are wooded and cut into 5-6 cuttings.

2. Insert the cuttings into a wet sand bed or flowerpot and shade immediately after.

3. Morning and evening sunlight can be seen 2-3 days after cutting to promote rooting.

After about two weeks, the beautiful cherry can take root and sprout and can be planted when the cuttings grow 5-6 true leaves.

Sedum spathulifolium

Cutting time: spring and Autumn

Cutting temperature: 15-20 ℃

Peony hanging orchid is generally propagated by cutting, which is mostly carried out in the Spring and Autumn period and is very easy to survive.

Cut off the mature branches, dry them a little, then insert them into the prepared basin soil and put them in a cool and ventilated place to keep the soil moist. After a few days, you can see the branches stand up and the cuttings begin to take root and sprout.

Peony orchid cuttings

A cutting branch.

Dahlia

Cutting time: June-August

Cutting temperature: 20-28 ℃

Dahlia cutting can be combined with the removal of lateral buds.

1. When the lateral buds grow to 15 to 10 cm, cut the lateral buds and ensure that the lateral buds have 3 buds.

2. The upper two leaf buds were retained, and the lower leaf buds were cut off the basal leaves.

3. Insert the cuttings into the soil, cover the second bud, water thoroughly and shade.

4. Spray water in the morning and evening, keep the soil moisture at 90%, and take root after about three weeks.

Dahlia with successful cutting

Chrysanthemum

Cutting time: April-May

Cutting temperature: 18-20 ℃

Chrysanthemum is usually propagated by cuttage, which is divided into bud cutting, tender branch cutting and leaf bud cutting. we usually use tender wood cuttings to propagate in our daily life.

1. From April to May of each year, the twigs of chrysanthemum are cut off 8-10 cm as cuttings.

2. Remove all the leaves in the lower part of the cuttings, leaving only the upper leaves.

3. The cutting substrate should be vermiculite perlite or coarse sand, and the cuttings should be cut on the substrate.

4. At the temperature of 18-20 degrees, most varieties take root in about 3 weeks, and the seedlings can be transferred to the pot in about 4 weeks.

Cut cuttings

Cuttings treatment

Cuttage

Coloured leaf grass

Cutting time: spring and summer

Cutting temperature: 18-25 ℃

When cutting colourful leaf grass, water cutting method is often used to propagate.

1. Prepare containers, glasses and plastic bottles.

2. Cut the cuttings, select the stout colored leaf grass about 10 cm, leave only 1-2 nodes at the base, and cut off the lower leaves.

3. Put the treated cuttings into a container with water 3-4 cm below the cuttings.

4. Place the container at the scattered light and change the water every 2-3 days or so.

Under the condition of 18-25 ℃, the white root system can be seen in one to two weeks of the month.

Colourful leaf grass rooting in water

Goldfish hanging orchid

Cutting time: spring, autumn

Cutting temperature: 20-25 ℃

Goldfish hanging orchid gets its name because the flower looks like goldfish and is deeply loved by people.

The main results are as follows: 1. The best cutting time of goldfish is in spring and autumn.

2. When cutting, select the cuttings with strong branches, cut off the length of about 10 centimeters, and insert the cuttings into the substrate.

3. The best matrix is the mixture of river sand or peat perlite and vermiculite.

Pay attention to moisturizing after cutting, can be bagged or often sprayed with water, rooting in about three or four weeks. After rooting and growing new shoots, the heart should be picked in time to promote the germination of lateral branches and maintain a good plant type.

Carnation

Cutting time: October, February-March

Cutting temperature: 10-15 ℃

1. The cuttings were selected from the mother plant with strong growth, neat flowering and short branches with thick nodes.

2. Select short and thick lateral buds in the middle of strong branches, with a length of 3 to 4 cm.

3. Insert the cuttings into the loose and breathable substrate, and the depth of the cuttings is about 1/3 to 1/2 of that of the cuttings.

4. Pour water thoroughly after insertion and keep 10-15 degrees.

At the beginning of the insertion, it is generally necessary to shade the sun in a sunny day to avoid strong light, which can be shaded for about 2 weeks. Cuttings can take root in about 30 to 45 days, and generally can be transplanted after one month of seedling survival.

Mint

Cutting time: may-June

Cutting temperature: 15-25 ℃

Mint is both beautiful and edible, and is deeply loved by everyone, so how should mint be cut?

1. Intercept blogs and cuttings, about 10 centimeters per cuttage.

2. Remove the leaves from the lower part of the cuttings and insert them into the substrate.

3. After taking root and sprouting, transplant the plant into the flowerpot.

Cutting mint

Tortoise back bamboo

Cutting time: spring, autumn

Cutting temperature: 25-27 ℃

Stem-node cuttings can be used in spring and autumn, and the cuttings from April to May in spring and September to October in autumn are the best. Therefore, the temperature is suitable for stem node incision healing and rooting, and the survival is quick.

The main results are as follows: 1. The cuttings select the lateral branches of the same year with abundant stem tissue and strong growth. The cuttings are 20-25 cm long, cut off the basal leaves, retain the upper leaflets, cut off the long aerial roots, and retain the short aerial roots.

2. The mixed substrate of coarse sand and peat or rotten leaf soil for bed insertion.

3. Maintain 25-27 ℃ and high air humidity after insertion.

It takes about a month to take root, so we need to wait patiently.

Paeonia lactiflora

Cutting time: June-July

Cutting temperature: 20-25 ℃

Peony and peony do not know whether we can distinguish it, in fact, a big difference between them is that peony is woody, while peony is herbaceous. Let's take a look at the cutting method of peony:

1. Cutting substrate: mainly river sand, perlite and vermiculite.

2. Select the cuttings with a length of 10-15 cm, each with at least two nodes, and cut off the leaves of the lower node.

3. When cutting, the depth of the substrate is about 5 cm. After cutting, the substrate is watered thoroughly and wrapped with plastic film to ensure that the humidity is between 80-90%.

In about three or four weeks, peony can take root and form dormant buds. After taking root, the amount of water will be reduced and the plastic film will be removed gradually.

Carnation

Cutting time: spring, autumn

Cutting temperature: 10-25 ℃

The best cutting season of carnation is from autumn to early spring, and it is easy to cause rotting roots when the temperature is high in summer.

1. It is better to use lateral buds when cutting, and lateral buds must be strong and free from diseases and insect pests.

2. Pure perlite and pure vermiculite are the best cutting medium. if the weather is very cold, then the general nutritious soil is also fine, because the cold temperature soil is not easy to produce bacteria.

3. The cuttage container can use a small flowerpot or a disposable water cup with holes in the bottom.

After cutting to spray enough water, after the control of the soil is not easy to be too wet, otherwise easy to rot roots.

Hua Hua hematemesis finishing, ask the babies to smile!