How to cultivate potted Ping an trees?

Ping an tree, which originated in Lanyu Island, is the elegant name of Lanyu cinnamon, implying peace and auspiciousness, and can exude the fragrance of purifying air and expelling peculiar smell. its skin has the effect of dispelling wind and cold, relieving pain and removing blood stasis, activating blood and invigorating the stomach. In recent years, as a potted plant, it is becoming more and more popular among urban families. let's take a look at how Ping an tree potted plants are cultivated.

The Culture Environment of Ping an Tree

Safe trees like warm, humid, sunny environment, like light and shade, like warm heat, no frost and snow, foggy and hot places, do not tolerate drought, stagnant water, cold and dry air. The acid sandy soil with loose and fertile, good drainage and rich organic matter should be used for artificial cultivation, and the suitable temperature for growth is 20 ℃-30 ℃.

The function of potted Ping an Tree

1. Medicinal value: ping an bark can be used as medicine, which has the effect of dispelling wind and dispelling cold, relieving pain and removing blood stasis, activating blood circulation and invigorating stomach.

2. Purify the air: ping an tree has the effect of purifying indoor air and absorbing decoration pollution. The body is rich in cinnamon oil (mainly cinnamaldehyde), which can emit the fragrance of correcting peculiar smell and purifying air.

3, fengshui function: the safe tree can be placed in the living room, balcony and other places with a wide range of space, because the safe tree is an evergreen plant, which can change the indoor air flow, increase the indoor vitality, and make people feel the warm breath of life. at the same time, the safe tree can eliminate indoor odor, bring health and bring peace.

How to raise potted plants of Ping an trees?

1. Temperature: ping an tree likes the hot and humid environment, the best temperature is 22 ℃ to 30 ℃. When the temperature is more than 32 ℃, it is necessary to build a shed to shade and spray water on the leaves of Ping an tree to humidify and cool down, so that it can maintain exuberant growth. The lowest temperature in winter should not be lower than 5 ℃.

2. Watering: ping an trees like wet soil and water appropriately every morning and evening. In winter, you should spray more water and less water. There can be no stagnant water in the basin.

3. Light: ping an tree needs better light, but it is more resistant to shade. It is suitable for the maintenance of semi-overcast environment, and its light demand varies with age. if the light is too strong, it is easy to cause leaves to yellowing and lose mind, and reduce its due ornamental value.

4. Fertilization: fertilize Ping'an trees once a month. After autumn, phosphate and potassium fertilizer should be applied twice continuously. In winter, all forms of topdressing should be stopped to prevent fertilizer from harming the roots.

5. Soil: small plants change pots once a year, large plants change soil once every two years, loosen the soil once a month in the growing season, turn the basin and change soil time, preferably in spring.

6. Diseases and pests: aphids are easy to grow on the young leaves and new buds of Ping an tree. after spreading plant ash, rinse with clean water and spray neem leaf juice, which can effectively kill insects and kill with 2000 times of imidacloprid wettable powder.

Matters needing attention in how to cultivate Ping an trees

In China, many plants and flowers have very beautiful names, and Ping an Tree is also one of them. The real name of Ping an Tree is Orchid Island Cinnamon, which belongs to the evergreen Lauraceae. Its branches and stems are dignified, yellowish green, smooth and hairless. The surface of the leaf is bright green and has a metallic luster, while the back is grayish green. Next, I would like to tell you about the breeding methods and matters needing attention of Ping an tree, hoping to help you.

The Culture method of Ping an Tree

Potted soil selection: the potted soil of Ping an tree pot, it is appropriate to use acid sandy loam with loose and fertile, good drainage and rich organic matter, which is also the pot soil requirement of most indoor flower farming. If the soil adhesion is heavy or the acidity is low, it will cause the leaves of aquaculture to yellowing, sprouting and regeneration to decrease, thus affecting the growth life of plants.

The suitable temperature for culture: the optimum temperature for Ping an tree growth is 22 ℃ to 30 ℃, and the lowest temperature should not be lower than 5 ℃. In case of freezing or days of frost should do a good job of heat preservation, in order to prevent bark cracking, branches and leaves withered, serious may be frozen to death.

With moderate light, the safe tree not only likes the sun but also is very shady, but it can not be exposed to the sun, especially when it is placed in the sun in summer, it is appropriate to cover about 50% of its area, otherwise the sun may burn the leaves. It can be exposed to the sun directly in winter without the need for shelter.

Watering correctly, Ping an tree likes a humid environment and is not resistant to drought, its basin soil should be kept relatively moist, leaves should be sprayed with water in dry weather, leaves should be sprayed once a day in summer, and indoor relative air humidity should be kept above 60%. When watering, you can first water once, and then water again in half an hour, so as to avoid the appearance of half of the water. The number of times of watering varies according to the season, and it can be watered when the topsoil is a little dry.

Fertilization, fertilization every other month except winter, winter fertilization may hurt the rhizome.

Pest control, young leaves and new buds of Ping an tree are prone to aphids. After spreading plant ash, rinse with clean water; spray neem leaf juice, which can effectively kill insects; spray imidacloprid wettable powder 2000 times.

Matters needing attention in the Culture of Ping an Tree

The breeding focus of Ping an tree has the following four points. The first point is light. Safe trees should pay attention to cover their leaves in summer, otherwise they will be easily burned by the sun. The second point is temperature. Ping an tree likes warmth, and the most suitable temperature is 20 to 30 degrees. In winter, it is best not to put the Ping an tree outdoors, but to move it indoors for breeding. The third point is to water correctly. Ping an tree likes wet soil, so it has to hand over water to Ping an tree every day in summer. Fourth, loosen the soil. When raising a safe tree, it is best to loosen the soil every other month, so that the safe tree grows better.

Causes of yellowing of leaves of Ping an tree and its solutions

Yellowing of leaves is a relatively common phenomenon in the process of indoor flower culture, and it is inevitable that leaves will not turn yellow in indoor culture of Ping an trees, and the main reasons for yellowing or shedding of leaves of Ping an trees are as follows:

First, due to accidents or special circumstances, the root system of the plant is seriously damaged, which leads to the yellowing of leaves.

Second, the yellow and fallen leaves of Ping an tree were caused by freezing injury when the indoor temperature was below 5 ℃.

Third, too much watering leads to rotten roots at the bottom, thus causing plants to yellowing and falling leaves.

Fourth, the water quality is alkaline and heavy, which leads to the slow yellowing of leaves, which is more common in the north, especially in other places.

Fifth, improper fertilization, excessive fertilization and excessive concentration, resulting in water loss, atrophy and necrosis of nutritious fibrous roots.

Sixth, the leaves are withered and yellowed after exposure to the hot sun for a long time.

The above is for you to talk about the Ping an tree culture methods and points for attention, we are clear? Please pay attention to more knowledge of home decoration.

How to cultivate potted plants of Ping an trees

Ping an tree is a kind of foliage plant, whose flower language is to pray for peace, family happiness and all the best. It is widely loved by the public because of its name "Ping an", and its body is rich in cinnamon oil, which can emit the fragrance of correcting peculiar smell and purifying air, so it is very suitable for indoor breeding. Steps / methods

With moderate light, the safe tree not only likes the sun but also is very shady, but it can not be exposed to the sun, especially when it is placed in the sun in summer, it is appropriate to cover about 50% of its area, otherwise the sun may burn the leaves. It can be exposed to the sun directly in winter without the need for shelter.

At the right temperature, Ping an tree likes to be warm and hot, and is not resistant to cold, so it is most suitable to grow at a temperature of 20 to 30 degrees. It is best to move into the house in winter so that the growth environment is not less than 5 degrees. Summer high temperature above 30 degrees should also do some protection, can spray water on its leaves to lower the temperature.

Watering correctly, Ping an tree likes a humid environment and is not resistant to drought, its basin soil should be kept relatively moist, leaves should be sprayed with water in dry weather, leaves should be sprayed once a day in summer, and indoor relative air humidity should be kept above 60%. When watering, you can first water once, and then water again in half an hour, so as to avoid the appearance of half of the water. The number of times of watering varies according to the season, and it can be watered when the topsoil is a little dry.

Soil and flowerpot, Ping an tree is suitable to grow in loose and breathable, rich acid rotten leaf soil or culture soil, need to loosen the soil every other month, and change the pot soil every two years. The bottom of the flowerpot should be breathable, and it should not be too small, because Ping an tree grows faster, and too small will hinder its growth.

Fertilization and pest control, fertilization every other month except winter, winter fertilization may hurt the rhizome. The safe tree will produce anthracnose, which will make the leaf surface, leaf tip and leaf edge brown. When it is found, in addition to removing the diseased leaves in time, it is also necessary to apply more phosphorus and potassium fertilizer to improve the plant's ability to resist diseases and insect pests. In addition, aphids and leaf curlers will also endanger the growth of safe trees, so they should be killed in time when they are found.

Matters needing attention

Avoid stagnant water in the basin in Meiyu weather, otherwise it may damage the roots.