MySheen

1 rubber band 1 basket, succulent immediately grow root, 100% survival!

Published: 2024-09-19 Author: mysheen
Last Updated: 2024/09/19, Autumn is coming, Huahua just wants to ask, how is your succulent plant? But in any case, the hot weather is finally over, for those rolled off the leaves, or beheaded succulent, naturally it is time to take root! Let's take a look at how to make succulent plants take root quickly.

Pull a rubber band-hydroponic culture will take root!

If the succulent plant at home is slow to take root in the soil, you can try Huahua. You only need a rubber band to let the succulent plant take root quickly.

1. Prepare a disposable paper cup, fill the cup with about 1x2 water, then find a cling film, cover the mouth of the cup, and secure the cling film directly with a rubber band.

2. Make a cut in the cling film with a knife. Remember not to cut too big to ensure that the root of the succulent plant can reach down, but the whole succulent plant can not fall into the cup.

3. Put the succulent plant on the mouth of the cup, pay attention to the lower part of the succulent root system not touching the water surface, then put the disposable paper cup in a cool and ventilated place, and be careful not to shine directly into the sun.

4. It only takes about 10 days for succulent plants to sprout many roots. At this time, transplant the rooting succulent plant into the flowerpot and take care of it slowly.

1 washing basket-vermiculite rooting method!

Every time you go to a lot of trouble to insert leaves, what if you always don't take root? Why don't you try cutting with a vegetable basket? The rooting rate is 99%!

1. Find out and clean the unused vegetable baskets at home. It is best to use those with small pores to prevent serious soil leakage, and then prepare peat soil, coconut bran and vermiculite.

2. Stir the peat soil and coconut bran into loose and breathable soil, fill the vegetable basket until eight minutes full, and then spread a thick layer of vermiculite on the top layer.

3. Dry the wound with succulent leaves that need to be cut, put it flat on vermiculite, and then put the basket on a shallow plate filled with water. Usually add water when you see the water level on the plate drop, do not water directly on the basin.

4. Put the basket and platter together in a place where the scattered light is good. The water in the shallow dish evaporates into water vapor, which can ensure enough moisture in the cutting soil all the time, and the vegetable basket has a gap, so it is not afraid of black rot at all. It only takes 10-15 days to take root!

1 plastic bottle-river sand rooting method

Huahua teaches you another way, that is, to take root with plastic bottles at home, which is about the same as the rooting rate of vegetable baskets.

1. First prepare the required materials: 1 plastic bottle, peat, ceramsite and river sand.

2. Lay a layer of ceramsite at the bottom of the container, about the thickness of 2cm, then cut off the bottom of a plastic bottle and insert it vertically into the container.

3. Spread peat soil on the ceramsite, finally sprinkle a layer of river sand on the basin, and lay the succulent leaves that need to be cut flat on the river sand.

4. Pour the water into the plastic bottle. This not only keeps the soil slightly moist, but also avoids the possibility of watering the basin directly, resulting in succulent black rotten water.

 
0