MySheen

Cutting 18 kinds of common flowers quickly, 100% live.

Published: 2024-12-22 Author: mysheen
Last Updated: 2024/12/22, Recently, the temperature has dropped rapidly, and the autumn is crisp, which is the perfect time for cutting. Today, Huahua will introduce 18 kinds of common family flower cutting methods, a variety of, a variety of, we can according to their own materials, rush.

Recently, the temperature has dropped rapidly, and the autumn is crisp, which is the perfect time for cutting. Today, Huahua will introduce 18 kinds of common family flower cutting methods, a variety of, a variety of, we can according to their own materials, hurry up to learn! Make sure you turn into a green finger and live with everything!

Green pineapple cuttings like this will survive 100%!

1. Cut off the sturdy and fresh green rattan with scissors, and the scissors had better be sterilized with a lighter in advance.

2. Cut the green radish branch into several small segments, each containing 2 nodes, with a leaf and a bud spot in the middle.

3. Prepare rotten leaf soil, peat soil, perlite, mix evenly according to the proportion of 2:2:1, preferably sterilized in advance, put in the sun for a day without disinfection. Then spray water to make the soil slightly moist, and you can use it to grow green apples!

4. Put the green vines in a circle and insert them into the soil vertically with the leaves facing up.

5. After the cuttage is finished, spray some water and put it in a cool and ventilated place. When the soil is dry and then watered thoroughly, small buds will soon grow!

Longevity flowers are cut in this way, 1 pot becomes 10 pots!

1. Do not throw away the branches of longevity flowers that are usually trimmed, cut them clean, cut them into small segments, and then put them in a cool and ventilated place to dry the wound.

(photo by: longevity Flower)

2. Prepare clean rotten leaf soil, stir some perlite and spray water to make the soil slightly moist and a little damp. If there is no rotten leaf soil at home, it is OK to mix some river sand with clean garden soil.

(photo author: Milu Longfei Source: longevity Flower)

3. Insert the lower end of the longevity flower branch into the soil, pour it with water, and put it on the east-west balcony or east-west windowsill of astigmatism.

(photo by: longevity Flower)

4. Without ten days and a half months, the long-lived branches of cuttings can grow a lot of roots of white flowers!

(photo by: longevity Flower)

5. After taking root, bask in the sun, water once a week or so, and potassium dihydrogen phosphate once a month. After a few months, it will blossom!

Tiger skin orchid leaves hydroponic cuttings, rooting in 1 week!

1. Break off the strong, thick leaves, cut the leaves into several small segments, each section of about 10 centimeters, after cutting, put it in a ventilated and cool place to dry for 2 days.

2. If you see the incision of tiger skin orchid, a little atrophy, wilting, it means that the air is good, slightly dry than not, rooting faster, the survival rate is higher.

3. Find a water cup, fill it with water, put the tiger skin orchid into 3-5 cm, be careful not to confuse the top and bottom, or it won't take root.

4. Adhere to about 4 days to change the water, the water can add a little carbendazim, so that 2 weeks, can grow roots!

5. After taking root, add some nutrient solution or aspirin to the water, about 2 months, can grow small buds!

Sponge + wipes, sweet-scented osmanthus cuttings 100% live!

1.

Prepare a cleaning sponge for washing dishes, cut it into small pieces and drill several small holes in each piece.

2. Cut the semi-lignified branches of sweet-scented osmanthus, about 10-15 cm in length, with 2-3 leaves at the upper end and oblique cut at the lower end.

3. Put the branches in potassium permanganate solution, soak for 5-10 minutes, and disinfect.

Insert the branches into the clean sponge.

(photo author: afternoon sunshine petals ~ rain)

4. Wrap the sponge with a wet tissue soaked in water.

(

Photo author: afternoon sunshine petals ~ rain

)

5. Put the sponge wrapped in wet paper towels into a plastic bottle and pour 1-2 cm of water at the bottom.

(

Photo author: afternoon sunshine petals ~ rain

)

6. Put the plastic bottle cap on the lid, leave some gaps, and then put it on the indoor south balcony, south windowsill, east-west balcony, east-west windowsill and other places.

(

Photo author: afternoon sunshine petals ~ rain

)

7. Sponge, wet paper towels can maintain high humidity, less than a month, sweet-scented osmanthus can take root!

(

Photo author: afternoon sunshine petals ~ rain

)

Gardenia pinch the root and live if you throw it into the water!

1. Cut the healthy branches of Gardenia jasminoides in the second half of the year, cut off the lower branches, leaving only the top 2 leaves.

2. Foam boxes that are not used at home can be washed clean and pierced with awls.

3.

One hole, one branch.

Insert the gardenia branches into small holes one by one and float in a container with water. the upper layer had better be covered with a plastic bag to moisturize.

4. About ten days and a half months, the branches of Gardenia can grow small white roots!

5. After taking root, you can gradually bask in the sun, and then transplant the branches in a separate basin for maintenance in 1-2 weeks.

If the triangular plum is inserted like this, the big white root will rub off!

1. Cuttage triangular plum, you can use coconut brick, in advance with carbendazim bubble water disinfection 30-40 minutes, after soaking a little dry, pour into a disposable cup.

2. Cut the triangular plum branches to the left and right length of the palm, remove the lower leaves, leaving only 2 pairs of leaves at the upper end.

3. Insert the triangular plum branches into the coconut brick soil, then put them into a transparent storage box, spray water on the wall of the storage box, and then close the lid. Do not cover tightly, leaving some gaps.

4. Put the storage box in a cool and ventilated place, spray the lid twice a day to moisturize, keep water on the wall of the box, and take root in about 20 days.

If you insert camellias like this, you will save your life!

1. Select healthy and sturdy camellia branches that grow for about half a year, which are most likely to survive with active tissue and full axillary buds.

(author: Jinhua Flower Friends hlj Source: Shandong Bonsai Bar)

2. Trim camellia cuttings so that each cuttage contains 2 leaves, then soak in carbendazim solution for 15-20 minutes, then take out to dry.

(author: imagine creating an extraordinary Source: Camellia.)

3. Prepare clean river sand and soak and disinfect it with potassium permanganate solution in advance, which can reduce the black pole and improve the survival rate.

Disinfect the river sand, pour it into the flowerpot, spray it with clean water, and prick the hole with your finger on the soil surface.

4. Insert the camellia branches into the hole, compact them slightly, cover them with a thin film, and place them in a place with astigmatism and ventilation for maintenance. Turn on the spray 1-2 times a day, and it will soon take root!

(author: Gangtian Source: Sina blog)

The cuckoo is inserted like this, a few live ones!

1. Use scissors to cut off healthy, pest-free rhododendron branches, not too long 5-10 cm, cut off after bubble carbendazim disinfection.

2. Prepare a mineral water bottle, cut it from the middle, leave a little connection, don't cut it completely.

3. Poke several holes in the bottom of the plastic bottle with an awl, then put the clean perlite into the lower half of the plastic bottle, squat into the water container to soak the basin, or pour thoroughly.

4. Put the rhododendron branches soaked in carbendazim into the wet perlite and put them in the tray.

5. Tape the upper and lower parts of the plastic bottle and pour water into the tray. During the rooting period, make sure there is always water in the tray!

6. Put the whole cutting device in a place with astigmatism and ventilation, and the cuckoo will grow roots in 1-2 months.

Rose plastic bottle cuttings, a cut will live!

1.

Collect waste mineral water bottles, tear off the advertising paper, if there is water in it, keep it, don't pour it out.

two。 Cut off the fresh and healthy rose branches, the branches are about the length of the palm, and the leaves do not need to be cut off. Insert the branch into the mineral water bottle so that the water at the bottom is slightly less than the bottom of the branch.

3. Put the mineral water bottle with branches open on the east-west balcony or north balcony, do not expose yourself to the sun or put it in a place where the temperature is too high.

4.2-3 days or so to change the water, the water had better use pure water or mineral water, soon rose branches will appear healing tissue, and then grow roots.

5. When hydroponic brick soil culture, you can put the rooting branches into disposable plastic cups, add a little soil a day, let the roots slowly adapt, and gradually turn into soil culture.

If the crab claw orchid is inserted like this, it will become a waterfall next year!

1. With a sharp art knife, cut off the branches of the crab claw orchid and choose a stronger one.

two。 Put the cut crab claw orchid branches in an astigmatic and ventilated place to dry the wound for about 1-5 days.

3. A mixture of peat soil and sand soil was used as cutting soil for crab claw orchid.

4. Put 2-3 cm at the bottom of the crab claw orchid branch, insert it into the soil, and water it once.

5. Use a plastic bag to cover the crab claw orchid, do not cover tightly, moisturizing.

6. Put the basin in a place with astigmatism and ventilation, pour some water on the soil when dry, and open the bag for ventilation for 2 hours a day.

7. About a month, crab claw orchid root system will grow very long, at this time, you can dig out and transplant into a large pot!

Insert the chrysanthemum like this, insert a pot!

The following five pictures are by Aoju, Hubei.

1. Cut sturdy, disease-free chrysanthemum branches.

two。 Remove the lower leaves, leaving 2-3 leaves and about 3 mm under the leaf nodes.

3. Dip the lower branches of the chrysanthemum with rooting powder.

4. Prepare peat soil and perlite in half, stir well, insert several holes in the soil with bamboo sticks, and then insert chrysanthemum branches into the cave.

5. The insertion depth of the branch is about 2 cm, not too deep!

6. After plugging in, pour water thoroughly, put the seedling box in a cool and ventilated place, and spray water once every morning and evening.

Chrysanthemums are very easy to live, and it won't be long before they take root.

Peppermint had better be inserted, pinch a branch and live!

1. Cut off the sturdy mint branches with scissors, each about 8-10 cm.

two。 Put the peppermint branch into the water bottle, the water does not need too much, can touch the lower end of the branch slightly.

3. Put the hydroponic bottle in a cool and ventilated place, change the water once every 2-3 days, and it will take root in about 10 days!

4. After taking root, you can slowly see the sun, and when the root system grows to about 5 cm, you can transplant it into the soil!

If the ball orchid is inserted like this, the whole basin is full of white roots!

The following 5 pictures are by: durian Piaopuo 406

1. Cut off fresh, healthy bulbous branches, not too long, and leave 2-4 leaves. Leave the shady windowsill to dry for 10-20 minutes.

two。 Prepare bark, perlite and blue stone, stir well according to the proportion of 1:1:1, and pour into several disposable cups.

3. Insert the cuttings into the disposable cup and pour through the rooting water for one time. The proportion of rooting water is rooting agent: clear water = 1 / 2 000.

4. Put the disposable cup with branches on the tray, cover it with a plastic lid with holes, spray water every night, and pour water thoroughly when the soil is dry.

5. Soon, the ball orchid will grow roots!

There is no need to buy epiphyllum, insert a leaf into a pot!

1. Pick the sturdy leaves of epiphyllum, the older the better, the easier it is to take root and survive.

two。 Make a few cuts at the bottom of the branch, apply a little rooting agent, and then insert it into the soil to make it easier to take root.

3. Usually do not have nothing to pick out to see, in less than a month, the root system will grow out.

4. Continue to raise for a period of time, and there will be a number of small buds around the leaves!

The geranium is so cut, it is guaranteed to live!

1. Usually, don't throw away the plastic bottle after drinking milk tea, wash it clean, and put a water hole on the bottom with an awl.

two。 Cut a few sturdy branches of geraniums, about one finger long in each section, leave 1-2 leaves and leave them in a cool place to dry.

3. Fill the plastic cup with clean river sand, pour it thoroughly, and then insert the geranium branches into the sand.

4. After all the geraniums have been inserted, spray once and keep them in an astigmatic and ventilated place.

5. In less than half a month, geranium branches will grow roots, and produce small buds, and then half a month can be transplanted into a large pot!

Hydrangea is inserted like this, 1 basin becomes 10 pots!

1. Cut off a sturdy hydrangea branch with a sharp beauty knife.

two。 Then use a beauty knife to cut this hydrangea branch into several small segments, so that the lower end of each branch is obliquely cut and the upper end is cut flat.

3. Make sure the upper notch is about 1 cm away from the blade, and cut the blade in half to reduce water evaporation.

4. Prepare vermiculite, pour it into the basin, pour water thoroughly, and then insert all the branches below the leaf node into the soil.

5. Now the temperature is suitable, it can take root in less than 20 days, and it can be put on the pot in more than a month.

If you insert figs casually, you can eat the fruit next year!

1. Figs are really good cutting plants, cut off a few healthy branches of about 15cm, to ensure that there are about 3 leaves on the branches.

two。 The lower end of the cut branch is soaked in a rooting agent solution for 15 minutes to half an hour.

(

Author: tianyaoxian999 Source: fig Bar

)

3. Prepare a few clean plastic bottles, pierce a few holes in the bottom, from the middle of all two halves, not the lower half, just the lower half.

4. Pour the clean river sand into a plastic bottle, then insert the fig branches, water them thoroughly and put them in a cool and ventilated place.

(

Author: tianyaoxian999 Source: fig Bar

)

5. In less than half a month, the fig branches can take root!

(

Author: tianyaoxian999 Source: fig Bar

)

6. In another half a month, when the roots grow much longer, you can cut open the plastic bottles, put them directly into flowerpots and transplant them, slowly watering them and basking in the sun.

(

Author: tianyaoxian999 Source: fig Bar

)

Big paulownia & African pansy, excerpt can also be inserted!

1. Use an art knife to cut off a healthy leaf of paulownia.

two。 Dry the cut leaves of the tree tree to dry the wound.

3. Soak the tip of the petiole in clear water, change the water every 2-3 days, and the root system can grow in less than half a month!

4. After the leaf has taken root, bury it in the water moss.

5. Water moss dry quickly spray water, spray 1-2 times a day, a month will be able to grow small buds!

6. After growing a small bud, it can be transplanted into a big pot in half a month!

That's all for today's cutting skills!

Huahua is about to spit blood!

Flower friends, don't live up to Huahua's painstaking efforts.

Share or collect quickly!

The picture comes from the Internet, and the copyright belongs to the original author.

Unauthorized, do not reprint; if you need to reprint, please contact the backstage for authorization.

Reply:

The name of the plant (eg a fortune tree)

Check the culture method

For advice on flower cultivation problems, please add personal Wechat:

139555167

(long press copy)

 
0