This undressing position makes people blush.

Crystal shrimp, as soon as it smells its name, it will feel that this thing is extraordinary. Because it is a very ornamental shrimp species, because of its bright color, a kind of transparent texture, so now more and more people pay attention to this transparent elf. And the red crystal shrimp body color is red and white, with green water plants, can be called beautiful.

Crystal shrimp is known to everyone, so do you know how it "undresses" when it is growing up? Shh, let's enjoy it quietly.

Crystal shrimp is accepted and loved by more and more players because of its gorgeous color and lovely appearance, but because it is a little more difficult to breed, many novices are deterred, and some people build the tank smoothly for the first time. Shrimp can hold eggs and reproduce quickly, but subsequent attempts have repeatedly failed or even been wiped out, and there are many reasons. How can we raise some beautiful shrimp? the editor thinks that the most important thing is to open the tank. How to open a very stable shrimp tank? here's an introduction.

Problems with the equipment:

The choice of bottom bed

Personally, it is recommended to use mud, because mud can maintain its own fertility for a long time and promote the normal reproduction of some beneficial algae and microorganisms, and these are natural shrimp grains, which can not be replaced by any tool shrimp food. and the mud itself has a certain bacterial culture effect, and the effect seems to be very good, now known as crystal shrimp mud is really more and more.

At present, needless to say, I only talk about two kinds of ADA and ELOS,ADA, which should be the first choice for most players, but the new ADA is much worse than the old model, such as fertility reducing acid, pulverization speed change and so on. To solve these problems, I mixed with ELOS, in fact, ELOS has only been rising in China for a few years: it gives me the most intuitive feeling that fertility is average, acid reduction is good, and pulverization speed is relatively slow, but the mixing of the two is relatively slow. Basically can complement each other, play their own maximum effect, another very important point, there are few false, you know. As for energy sand, personal opinions can be used or not, energy sand does maximize the fertility in the cylinder, but the price is not low, conditional can go up, no conditions do not matter.

Selection of cylinder block

Personally, I suggest that beginners use 90-45-45 if the tank is too small. After opening the tank, the water quality will be relatively stable, and it will be relatively easy to adjust the water quality, and it will be relatively difficult to control the water quality no matter how small it is. If it is too big, it is not impossible, but it is too big, the initial shrimp purchase fee will be higher, because we need to breed shrimp, if the initial shrimp is too few, and the cylinder is too big. Male shrimp is very difficult to catch the shell of female shrimp, there is no way to mate, how to talk about reproduction.

The choice of filter

Individuals do not recommend bottom filtration or anti-airlift. The biggest drawback of these two methods lies in the mud itself, because the powder from the pulverization of the mud is dispersed into the water, which will cause the turbidity of the water body, and the algae we do not need will breed. And with these two kinds of release fertility is also very serious, the average player has only one or two shrimp tanks, you can only turn the tank and start all over again, that long time of raising water is enough for people to spend time. Individuals always use filter buckets, and only two buckets in series, the same two power buckets, open the front one as the power, put all cotton, the back of the full release of biochemical equipment, run once every half a month, once about 10 minutes is enough, this can avoid partial blockage of the rear drum, if at the same time there is a problem with the front bucket, for example, the rotor is broken and the motor burns, you can open the back immediately. It will not lead to dead shrimp because of the filtration problem, such disadvantages, first, because there are more pipe fittings, which increases the risk of water leakage, and second, the volume of the front filter material is not as good as a bucket, so I think it is not suitable. It is important for shrimp culture to have stable water quality. Most of the stable water quality is maintained by the filter material. I think that the filtration of the shrimp tank does not need a large flow. But more filter materials are needed to stabilize the water quality.

The choice of water

Basically divided into tap water and pure water these two kinds, tap water in different places, pH and hardness and other values will be different, pure water data are basically the same, usually tap water instability factors are more important, so the experience of players with tap water is more important, pure water is more safe and safe, but because pure water does not have many nutrients. Minerals, and trace elements, so to rely on the later addition to solve, this is the malpractice of pure water, but always and consider the risk of pure water is smaller, so I suggest to use pure water to raise crystal shrimp.

Selection of nitrification system

No matter which one it is, you don't even have to use it, but there is one thing to note, but if you choose, only one kind of nitrifying bacteria will be used, because there will be conflicts between nitrifying bacteria, and if the overall nitrification system has been established, my personal opinion is that no nitrifying bacteria will be added in the later stage, and many players will add nitrifying bacteria when changing water. I personally think this method is not advisable. Because the establishment process of nitrification will consume a lot of oxygen, it will lead to a sharp decline in the oxygen content of the water, resulting in the death of the old nitrifying bacteria. Many players have clear water, and why the nitrifying bacteria suddenly turn white after changing the water.

Light

The choice of light. Personally tried a lot, the current more popular is LED, I still choose T8 and T5, taking into account the performance price or these two highest, gold brine is said to be favorable hair color of shrimp, many shrimp houses also use gold halide, but the biggest disadvantage of gold halide is that the calorific value is too large, this heat for people can not afford to buy water cooler is a very big blow, and gold halide easy to grow black hair algae, LED of course, the advantage is to save electricity. But the effect of algae explosion during water culture is not as good as that of lamp tube.

Let's start building a shrimp tank:

Cylinder block model: 90mm 4545m

Bottom bed: one bag each for ADA and ELOS, and then half a bag of ADA

Filter: two LED lights, a total of 47w

Heating: 300w glass explosion-proof

Auxiliary: double-head air pump plus two mixed-brand water demons

The first step

Distinguish the coarse and fine particles of ADA mud and ELOS mud, using a common bottom filter plate, the pulverization will be much faster after sieving, and the size of the particles sifted out is just right, but the fine particles screened out by ADA will be more.

Step two

At the beginning of mud laying, it is recommended to use ELOS coarse-grained mud as the bottom, then ADA coarse-grained mud, and finally lay the mixed fine mud of the two. If anyone wants to layer, it is suggested to lay ELOS mud on it. According to past experience, its pulverization speed will be slower.

Step three

First, spray the whole tank to moisturize, you can pour a small basin of water appropriately, but cover it with its packing bag and place it for about an hour or so, so as to avoid entering the water, muddy water and slow down the pulverization of the mud, and the air in the mud can also be discharged, after avoiding water injection, there is gas gathering in the mud seams, and when the time is about the same time, the water is not too high, just 5-10cm higher than the mud surface.

The fourth step

After all the water is replaced, and then filled with water, nitrifying bacteria can be added. Please note that it is recommended to use tap water at the initial stage, the effect of algae explosion in tap water will be better, but the effect of pure water is general.

Step five

The filtration system can be started and connected with water goblins.

Step six

You can consider adding a fast-growing grass such as small bamboo section, an apple snail, so that it will not reproduce, and nitrification needs to be decomposed by residue and feces when nitrification is first established, which is quite necessary. Apple snail is very effective in killing brown algae, blue-green algae, and if blue-green algae appear in the initial explosion, it will also eat them.

Step 7

A week later, plug the power into another barrel and run for about an hour, and then start turning on the light. Note that the light has not been turned on before. It is recommended that the light be turned on for about 8 hours a day. For LED lights, it is recommended to extend it a little longer, but also to keep it below 12 hours, because the water quality is still unstable at the initial stage, and other algae may grow. At this time, the bacterial membrane of the water will be very obvious, showing a white color.

Step 8

Then replace all the water, continue to add tap water and start raising water, and wash the water surface with water to achieve the effect of increasing oxygen and exploding algae.

Step 9

After completing this stage, we will control for a period of time, do not change the water, and change 80% of the pure water in about 35 days. This is that NO3 will break out on a large scale, and then it will tend to be stable, and the most effective way to solve it is to change the water. At this time, the nitrification system is already very stable, even if the water is not a problem.

Step 10

There is no fixed time in the next stage, the water quality varies from place to place, the amount of water evaporation is also different, and the hardware equipment and operation methods are different, which will lead to a difference in the water quality in the final tank. When Moss is in good condition, you can release shrimp.

Basically, the cylinder construction is completed in this way, and it can generally last for a year and a half to two years without turning the cylinder.

There are surprises here.