The cuttings of these three kinds of flowers have to take root every minute in summer and rub them all over the pot.

High temperature in summer, some flowers can also be cut in summer, here are three kinds of cutting methods of flowers in summer, let's have a look!

Petunia

(1)。 In the early morning before the sun, select the healthy branches, at this time the paper moisture is much, conducive to rooting, the selected paper cut short, the length of 10cm or so, cut attention to smooth cut, retain the top 2-4 leaves, and then cut off the leaves in general, so slow evaporation, retain moisture, is conducive to rapid rooting cuttings, the cuttings in a cool place to wait for wound healing.

(2)。 Choose the right size of the flowerpot, do not need to be too large, generally choose the diameter of 15~20cm or so. The soil should choose the mixed soil medium such as coarse sand and perlite with good soil permeability and permeability, this soil is very important, air permeability and drainage are not easy to lead to stagnant water, there will be no rotten roots.

(3)。 Carry on the cuttage, insert the dry cuttings into the soil and compact the soil slightly, which can not make the soil too loose, which can easily lead to cuttings lodging and is not conducive to rooting.

(3)。 When cutting, insert the lower end of the cuttings 2 cm 3 cm into the soil 2 cm 3 cm. If the number of cuttings is large, the plant spacing should be 6 cm, and the row spacing is 4 cm 6 cm, which can ensure that there is enough room for cuttings to grow after rooting.

(4)。 Keep it in a cool and ventilated place and wait for it to take root. The temperature is best controlled at 18-20 ℃. Regular water spraying can cool and humidify, and it will take root in half a month.

Milan

(1)。 Select the sturdy branches of Milan, soak them in rooting solution for about 1 hour, and then put them in a cool and ventilated place to dry, which is beneficial to wound healing.

(2)。 The soil chooses 2 parts of peat soil and 1 part of perlite to mix into the cutting soil. When the soil is ready, the soil is watered thoroughly. When watering, stop watering until there is a drain hole, and you can use iron wire as a supporting shelf.

(3)。 Insert the branches into the soil, cover all the buckets with plastic bags, open a small hole to help ventilation, put in a cool and ventilated place, can properly accept scattered light.

(7). After 2 months, you will be able to take root. After taking root, you can prepare the basin soil and transplant it into the pot.

Rhododendron

(1)。 Cuckoos grow from spring to summer, the branches will become strong and mature, select the appropriate branches for pruning, remove 1 or 2 leaves at the bottom and buds at the top, leaving 3cm or so. Spray water after treatment and put it in a cool and ventilated environment.

(2)。 Prepare the foam, cut with the foam box, poke several small holes in the bottom of the foam box, pad with broken tiles or ceramsite on the hole, contribute to drainage, the soil uses cinder or sand and other permeable soil, pad the bottom of the basin with 5cm or so, and then spread the nutritive soil around 8cm and water thoroughly.

(3)。 Insert the branches into the soil 2~3cm, compact the soil, and pour a small amount of water after the cuttings are done, so that there is a better contact between the branches and the soil, leaving no space.

(4)。 Putting a transparent film on the foam box can increase the humidity and help the cuttings to take root. Put it in a cool and ventilated place and it will take root in about 10 to 15 days.