What methods can be used to increase the yield of Pleurotus ostreatus in summer?

What methods can be used to increase the yield of Pleurotus ostreatus in summer? Please introduce the following techniques to increase the yield of Pleurotus ostreatus in summer: when the temperature lasts for 7-8 days and exceeds 30 ℃, the formed fruiting body stops growing and the hyphae no longer kink and differentiate. At this time, the water should be stopped immediately, so that the border surface is dry or cracked, and then spray clean water every 15 days. When the temperature drops in late August, knock the material surface with a small bamboo pole to "shock bacteria", then drill the hole with a diameter of 20 mm iron bar at an interval of 8-10 cm, spray 1ppm triacontanol solution into the hole, and pour water on the material surface again, so that the material surface is 1-2 cm deep, and then the bacteria are covered with film. Increase the temperature difference and cover the film for 3-5 days. After the hyphae germinated, the film was placed on the sunny border to keep the temperature in the border at 28 ℃-30 ℃. Two layers of rice straw were covered at about 3 o'clock in the afternoon, and after 8 o'clock in the evening, the straw and plastic film were removed to cool down, so that the temperature difference was more than 10 ℃, so as to stimulate the hyphae to accelerate kink and differentiation and form fruiting bodies as soon as possible. After spraying nutrient solution into the first stubble mushroom in autumn, remove the fungal cord and stop water for 5-7 days. In order to increase the nutrients in the culture material, it can be poured once with mushroom tonic or other nutrient solution. After the water is cut off for two days, the mushrooms will be managed according to the routine. Click to get more cultivation techniques of Pleurotus ostreatus