How to increase the yield of Pleurotus ostreatus in summer?

How to increase the yield of Pleurotus ostreatus in summer? Please introduce the following methods to increase the yield of Pleurotus ostreatus in summer: first, stop water drying. When the temperature lasted for 7-8 days and exceeded 30 ℃, the formed fruiting body stopped growing and the hyphae no longer kink and differentiate. At this time, the water should be stopped immediately, so that the border surface is dry or even cracked, and then spray clean water every 15 days. Second, knock the material and punch the hole. In late August, when the temperature dropped, hit the material surface with a small bamboo pole to "shock bacteria", then punched a hole with a diameter of 20 mm iron bar at an interval of 8-10 cm, sprayed 1ppm triacontanol solution into the hole, and poured water on the material surface again, making the material surface stagnant water 1-2 cm, and then covered with film to cause bacteria. Third, enlarge the temperature difference. After 3-5 days of film mulching, the film was placed on the sunny border after mycelium germination, and the temperature in the border was kept at 28-30 ℃. The straw was covered with two layers of straw at about 3 o'clock in the afternoon, and the straw curtain and plastic film were removed after 8 o'clock in the evening to cool down, so that the temperature difference was more than 10 ℃, which stimulated the mycelium to kink, differentiate and form fruiting body. Fourth, spray nutrient solution. After picking mushrooms in autumn, the fungal cord was removed and the bacteria were kept in water for 5-7 days. In order to increase the nutrients in the culture material, it can be poured once with mushroom tonic or other nutrient solution. After stopping water for 2 days, it can be routinely managed to produce mushrooms, and then sprayed in the mulberry stage. Click to get more cultivation techniques of Pleurotus ostreatus