MySheen

What is the key to planting Ganoderma lucidum?

Published: 2024-11-22 Author: mysheen
Last Updated: 2024/11/22, What is the key to planting Ganoderma lucidum?

What is the key to planting Ganoderma lucidum? Please give us four points to pay attention to in planting Ganoderma lucidum. The following are listed in detail for reference: 1. The preparation of Ganoderma lucidum nutrients: ① sawdust about 75%, wheat bran about 25%, ammonium sulfate about 0.2%, water content of mixture 70%; ② sawdust about 75%, wheat bran about 25%, water content of mixture 60% ③ sawdust about 50%, wheat bran about 50%, urea 0.1%, mixture water content 60%; ④ cottonseed husk 79%, wheat bran about 20%, sucrose 1%, mixture water content 60% 65%; ⑤ corn shaft residue 50%, sawdust about 30%, wheat bran about 20%, mixture water content 60% 65% ⑥ poplar leaves 75%, rice bran (or wheat bran) 25%, mixture water content 60%; ⑦ rice straw powder 45%, miscellaneous wood chips about 30%, wheat bran (or rice bran) about 25%, mixture water content 60% 65%. 2. Loading and sterilization of Ganoderma lucidum culture materials: after mixing the culture materials, simmering for half an hour and then loading. Conventional plastic bags can hold 0.25ml 0.3 kg of dry material. When bagging, the material should be compacted by hand and the material surface should be flat, then use a tapered wooden stick to pierce a 2.5 cm diameter vent from the middle of the material surface, plug the cotton plug at the mouth of the bag and wrap a layer of Kraft paper. If bottled, you can use a jar or mushroom bottle with a volume of 500ml and a caliber of 3.3mur4.6 cm. The filling method is basically the same as the bag method. After loading, arrange the material bag (or bottle) in the pot in layers and sterilize 1mi for 2 hours under the pressure of 1.5kg / sq cm, or sterilize 8mi for 10 hours under normal pressure. It is required to be loaded, sterilized and vaccinated on the same day. 3. Ganoderma lucidum inoculation and culture: inoculation is best carried out in the inoculation box, if there is no inoculation box, above the alcohol lamp flame or above the boiling water vapor. The inoculation room and vaccination tools should also be strictly disinfected. The staff should put on masks and wash their hands three times with soap. Take a jujube-sized strain from the bottle with inoculation rakes or tweezers and quickly put it into the cultivation bottle (bag). Then the bottle mouth (or bag mouth) is stuffed with cotton stopper and wrapped with Kraft paper, and transferred to the sterilized culture room for culture and sterilization. Keep room temperature 24 ℃-28 ℃, the mycelium will be full of bottles (bags) about 25 days after inoculation. In the germicidal stage, the management should be strengthened to prevent miscellaneous bacteria pollution, and those with miscellaneous bacteria pollution should be eliminated in time. When the bottle (bag) is full of hyphae, the white buds with large fingers gradually appear on the surface of the culture material, that is, the fruiting body primordium. When its growth is close to the cotton stopper, the cotton plug can be removed, the room temperature is controlled at 26 ℃-28 ℃, the relative humidity is increased to 80% Murray 90%, the scattered light is given, the air is ventilated every day, and the bottle (bag) mouth can grow in about 20 days, and the end of the stalk can differentiate into a bacterial cap. When the light white or light yellow on the edge of the cap disappears, the edge of the cap stops growing and becomes hard, and it can be harvested when the color changes from bright to dark pink brown. 4. Prevention and control methods of Ganoderma lucidum diseases: the inoculation process should be strictly aseptic; the culture materials should be sterilized thoroughly; properly ventilated to reduce humidity; those with mild infection should be scraped off the local miscellaneous bacteria and surrounding bark with a disinfection blade, and then smeared with concentrated lime milk, or the holes should be filled with 75% alcohol-dipped skimmed cotton; those with serious pollution should be eliminated in time. Click to get more planting techniques of Ganoderma lucidum

 
0