MySheen

Cultivation techniques of Pleurotus ostreatus: how can Pleurotus ostreatus develop bacteria quickly?

Published: 2024-11-05 Author: mysheen
Last Updated: 2024/11/05, How can Pleurotus ostreatus infect quickly? What should be paid attention to in Pleurotus ostreatus period? Please introduce the reasons for the rapid occurrence of Pleurotus ostreatus: it usually takes 25-30 days for Pleurotus ostreatus mycelium to fill the bag. The longer the inoculation time, the more chances of infection of miscellaneous bacteria, and the longer the production cycle. The rapid inoculation of Pleurotus ostreatus can significantly shorten the time of bacteria.

How can Pleurotus ostreatus infect quickly? What should be paid attention to in Pleurotus ostreatus period? Please introduce the reasons for the rapid occurrence of Pleurotus ostreatus: it usually takes 25-30 days for Pleurotus ostreatus mycelium to fill the bag. The longer the inoculation time, the more chances of infection of miscellaneous bacteria, and the longer the production cycle. The method of rapid culture of Pleurotus ostreatus can significantly shorten the time of producing bacteria, reduce the pollution of miscellaneous bacteria, speed up the emergence of mushrooms and shorten the production cycle. The method of rapid inoculation of Pleurotus ostreatus: the culture material (clinker) of Pleurotus ostreatus was bagged and inoculated at both ends. At both ends of the bag, use a sharp rod (2-3 cm in diameter and about 30 cm in length) to drill holes in the center of the bag head, with a depth of more than half of the bag head, then insert an appropriate amount of bacteria into the hole, put a small amount of bacteria on the material surface of the bag head, wrap the collar and tighten the bag mouth, seal it with a layer of paper and a rubber band, and then connect the other end in the same way. The bacteria of Pleurotus ostreatus should be arranged according to the air temperature. when the temperature is high, the bags are arranged in a well-shaped shape into a stack, 4 bags in each layer, and the double layer is discharged in the opposite direction, 5-6 layers per stack, leaving a certain gap between the stack and the stack in order to dissipate heat; at medium temperature, the bag is arranged into a well-shaped stack, each with 6-7 layers, and some space is left between the two piles; at low temperature, the material bags are arranged into a stacking wall, which is about 10 layers high, leaving a gap between the walls. Points for attention in Pleurotus ostreatus growth period: 1. The temperature of Pleurotus ostreatus is 25-30 ℃, too low temperature will prolong the time, too high temperature will burn out the hyphae. 2. After Pleurotus ostreatus inoculation, with the growth of mycelium, the material bag itself will be hot, so it should be stacked in about 1 week to check the bacteria and remove the contaminated bag. Click to get more cultivation techniques of Pleurotus ostreatus

 
0