How to cuttage eucalyptus seedlings?

How to cuttage eucalyptus seedlings? Please give an introduction to the method of planting eucalyptus cuttings, which is listed below for netizens' reference and study. 1. Selection of cuttings of eucalyptus seedlings: top tips and lateral branches of seedlings or tissue culture seedlings can be used; sprouts or tender branches of 1-5-year-old young trees can be used, and the cutting ends of the cuttings are semi-lignified. 2. Disinfection of eucalyptus cuttings and sites: first spray the cuttings with fungicides, then collect the cuttings, soak the cuttings with disinfectant, rinse with clean water and proceed to the next procedure. 3. Chemical treatment of eucalyptus cuttings: 1-2cm at the base of cuttings can be treated with naphthalene acetic acid, indolebutyric acid or other hormone formulations that promote rooting. 4. Culture of eucalyptus cuttings: the cuttings treated with hormones were then inserted into an aerobic hydroponic device with a depth of 3-4cm. 5. Temperature and light control of eucalyptus seedlings: when the air temperature is lower than 15 ℃, start the temperature control system to make the water temperature higher than 15 ℃, when the air temperature is too high and the sun is too strong, properly shade, make the water temperature not higher than 37 ℃, and adopt all-light water culture to ensure that the most suitable rooting temperature is 25 ℃-35 ℃. 6. Cleaning and disinfection of the eucalyptus hydroponic device: all the water in the hydroponic device is removed every 3 mi 5 days, and the fresh tap water is replaced once every production cycle (10 mi 20 days). After soaking the device with 1% calcium chlorate for 0.5 hours, the residual chlorine is washed and put into the next hydroponic culture. Click to get more eucalyptus planting techniques click to get more flower planting techniques