Video pictures of planting techniques of Chinese wolfberry

Lycium barbarum is a deciduous shrub of the genus Lycium barbarum of Solanaceae. Its leaves, fruit roots and bark all have extensive medicinal value. It is not only suitable for drought, sand wasteland, saline-alkali land planting, but also an excellent tree species in courtyard economy; the fruiting period is long, it can be planted for 50 years in the same year, and it can enter the full fruit period in 3-4 years. Generally, the yield of dried fruit can reach more than 3000 kg per hectare, and its fruit contains a variety of organic compounds and nutrients, which can tonify the kidney, nourish the liver, clear eyes, promote blood circulation, anticancer and so on. Lycium barbarum has a wide range of adaptation, lax requirements for soil, tolerance to drought, barren, salinity and sand famine, and grows best in well-ventilated sandy loam. Planting Chinese wolfberry can refer to the following methods: Chinese wolfberry variety selection: Chinese wolfberry seed reproduction, ramet, striping, cutting propagation. There are many varieties of Chinese wolfberry, including nearly 10 kinds of wolfberry alone. In order to achieve high quality and high yield, seed selection should be done well. In the first and middle of the month, on the plants of hemp leaves or hemp leaves with green leaves, short internodes of fruit branches, stout, few thorns, robust growth and no disease and insect pests, the mature fruits with large grains, bright red fruit color and high sugar content were selected for seed use. Crumple the fruit after harvest, rinse with clean water, rinse the peel and flesh, filter out the juice, rinse the seeds, and dry them in a dry and ventilated place. On the plant of this variety, the branches with short internodes, positive color, strong growth, full bud eyes and disease-free insects can also be cut into 20 cm long for cutting seedlings. The roots and tillers can also be dug up and planted directly under the trees of excellent varieties. Lycium barbarum cutting propagation method 1. After the seedling ground is turned over, apply 1500 to 2000 kg of basic fertilizer or 100kg of chemical fertilizer per mu. 2. Collecting cuttings before the spring sprouting of Chinese wolfberry branches, combined with the pruning of large seedlings of Chinese wolfberry, the cuttings were collected and cut into cuttings 10 to 15 cm long. 3. The cuttings were soaked in rooting powder for 24 hours. In the nursery bed according to the row spacing of 30 cm to trench, with 5 cm plant spacing cuttings, cuttings into the soil depth of 5 to 10 cm. The method of transplanting Chinese wolfberry: from late March to early April, the planting method of furrow irrigation on both sides of ridge planting was adopted, the row spacing was 1.5m × 2m, about 3300 plants per hectare were planted, and the pit was dug 40 cm × 40cm × 40cm. The mature farm manure mixed with 2 cm thick and mature soil was applied in the pit, and the fine ripe soil was covered with 10 cm fertilizer, and then the Chinese wolfberry seedlings with 3cm fibrous roots were planted in the pit. Cover the soil, steady, timely irrigation, in order to improve the survival rate. Chinese wolfberry management method: Chinese wolfberry herbicide: spring turn and autumn turn in April and September every year, with a depth of 20 cm. Four or six times of intertillage and weeding were carried out from May to July, with a depth of 6cm. It is helpful to eliminate diseases, pests and weeds, loosen the soil and ensure the normal growth and development of Lycium barbarum. Except for the intercropping of melons, sugar beets or dwarf crops planted in the garden, intercropping of other crops is strictly prohibited in the future. Fertilizer and water management: the fruit of Chinese wolfberry is divided into summer fruit and autumn fruit, so fertilizer and water have a great influence on the yield and quality of Chinese wolfberry. The annual fertilizer application amount of Chinese wolfberry for more than three years (full fruit period) per hectare (8-9 times) must ensure 350kg of urea, 3000 kg of diammonium phosphate or triplet superphosphate, and more than 37000 kg of high-quality barnyard manure. According to the sprouting, flowering and fruit expansion, the basal fertilizer was applied once in autumn. According to the age of the tree, dig a pit or a circular trench 20 to 60 centimeters from the trunk, 20 to 30 centimeters deep, apply fertilizer into the pit or ditch, cover the soil, and irrigate in time. In addition to deep fertilization on the ground, foliar fertilizer spraying also played a significant role in increasing the 1000-grain weight of fruit. It was sprayed 4 times in the first fruit period from June to July and twice in the second fruit period from August to September. Each time, 750-1500 grams of potassium dihydrogen phosphate per hectare, 750 grams of urea, 750 kilograms of water, 15 leaf noodles per hectare (5 milliliters) plus not 750 kilograms per hectare. In addition to timely irrigation after topdressing and irrigation required after each fruit picking, water is generally irrigated once every 12 days, once every 7 days, each time about 600m 900m 3, so that the summer water can be fully irrigated and the winter water should be well irrigated. Medlar pruning method: medlar shaping, pruning and coring play an important role in regulating reproductive growth and vegetative growth. The fruiting ability of the fruiting branches of the same year and biennial is the strongest, and the perennial and biennial spring branches are the best. Pruning principle: pruning includes two parts: shaping and pruning. Reasonable pruning can effectively improve the ventilation and light transmission conditions inside the crown, which plays an important role in accelerating the formation and expansion of the crown and balancing the tree potential. Make the tree grow strong, enhance the resistance, increase the fruiting branches, make the new shoots flourish, prevent overgrowth and premature senescence, adjust the relationship between growth and fruit, and promote flower bud differentiation. As a result, the young trees can bear fruit early and have high yield, make the adult trees have high and stable yield, prolong the full fruit period and improve the fruit quality. The tree shape of Lycium barbarum after shaping can be divided into evacuation layered shape, natural happy shape, natural cluster shape and so on. For Chinese wolfberry with different tree shapes and different growth years of the same tree shape, the requirements for pruning are also different. But in any case, in the year after planting, it is necessary to make reasonable shaping according to the idea of tree shape, so that the trunk, main branches, lateral branches and branchlets are clearly defined. A Chinese wolfberry can be roughly divided into 5 layers, each layer spacing 25 cm, the tree body is semicircular, the tree height is about 1.6 meters, the crown is about 1.5 meters. It is required to cultivate more fruiting branches, cut off non-productive branches, and master the pruning principle of "three go and three stay", that is, to get rid of the old and stay new, get sick and stay strong, and make the fruit branches evenly distributed in the crown. Operation process: in the same year after planting, reasonable shaping should be carried out according to the growth of the seedlings. Three tree trimming methods: evacuation stratification: fixed stem height of about 50 cm, with a central trunk, the top 20 cm below the germination of buds or branches all erased. At the top 20 cm, three main branches were selected, each with a distance of about 10 cm, as the first layer, 2-3 lateral branches were left on each main branch, and 2-3 main branches were left on the trunk next year as the second layer, and 2-3 lateral branches were also left on the branches, and so on. The lateral branch of the uppermost main branch can be reduced by one. The height of the tree is about 1.6 meters, and the crown diameter is about 1.5 meters. Sturdy, carrying a large amount of fruit. Natural happy shape: the height of the fixed stem is 20 cm, there is no obvious central trunk, and 3 main branches are selected at the base of the stem, each with an angle of about 30 °. There are 2-3 staggered lateral branches on each main branch, and the lateral branches are about 30 cm apart. Several oblique branchlets are selected on the main side branches, and the tree shape can be formed in 2 to 3 years. The tree has the advantages of good ventilation and light transmission, early fruit, high yield and good quality. This kind of shaping method is easy, the pruning quantity is small, and the management is convenient. Natural clump shape: without center trunk, 3-4 main branches grow directly from the ground, each main branch alternately matches 3-4 side branches, except the first side branch is 40-50 cm away from the base of the main branch, the other side branches are about 30 cm apart, and the fruiting branchlets are selected on the main side branches. the tree shape is well ventilated and transparent, which is beneficial to make full use of the space to achieve three-dimensional results. Pruning and plastic surgery are inseparable. Pruning is divided into autumn pruning, spring shearing and summer shearing. The requirements for pruning of Lycium chinense after one year, two years and three years are different, which should be strictly grasped. Autumn pruning: the time is from mid-October to mid-November, according to the requirements of three to three stay, cut off the non-productive branches and renew the fruit branches. In this way, the nutrient reserve of the plant can be increased and the fruit yield next year can be increased. Spring pruning: the time is from late March to early April, mainly to make up for the lack of last autumn pruning, cut the dry and prickly branches in winter, and sparse the dense branches to further improve the light conditions inside the crown. For biennial Lycium barbarum, when pruning annual branches in spring, the length of the main branch is 30cm ~ 40cm, the length of the lateral branch is about 20cm, and the length of the branchlet with gaps on the main and lateral branches is 8cm ~ 10cm. The key to the fruiting rate of the branches with large gaps is mainly to select biennial branches. The length of the main and lateral branches is 40cm and 50cm, and the length of branchlets is 20cm and 30cm. A twig was left on the lateral branch every 15 cm or so, and the fruiting branch group was cultured. By pruning the plant, the crown has been shaped. Summer pruning: the time is from June to August, mainly cutting off the sprouts, tillers and overgrown branches of the cut, saw, main branch, trunk and root, so as to reduce nutrition consumption. However, attention should be paid to retaining the auxiliary fruit branches used for supplementary space as the main branches. When the newly planted Chinese wolfberry sends out secondary branches, and the new branches of the old Chinese wolfberry grow to 40-60 cm, or when the branches grow to 20-30 cm in the crown space, they should pick out the heart and cut the shoots in time; wipe buds and remove sprouting in advance to the surrounding branches, so as to concentrate nutrients and promote flowering inside and outside the crown to bear three-dimensional fruit. It also promotes the middle and lower parts of these branches to send out more new branches and cultivate more fruiting branches, which has an obvious effect on increasing the yield of Lycium barbarum in the same year. It has a good effect on prolonging the fruiting life of Chinese wolfberry. Prevention and control of diseases and insect pests of Chinese wolfberry: black fruit disease of Chinese wolfberry occurred from May to August, endangering green fruits, buds and flowers. After the onset of the disease, the fruit showed brown spots. Prevention and control measures: trench drainage, removal of diseased fruit. Results during the period of spraying with 1 Bordeaux solution, 50% acetaminophen wettable powder 600 times was sprayed immediately after rain. Root rot occurred in late June and was more serious from July to August. At the beginning, the root blackened and gradually rotted, then the aboveground part withered and the whole plant died. Prevention and control measures: irrigate the roots with 50% thiophanate methyl 1000Mel 1500 times or 50% carbendazim 1000Mel 1500 times. Lycium barbarum fruit fly mainly harms young fruit, and its pupa overwinters in the soil for 3 generations a year. Prevention and control measures: spray 1000 times of 80% dichlorvos EC or 1500 times of 40% dimethoate EC every 7 mi 10 days for 4 times, or kill the newly emerged adults in the soil with poisonous soil or remove maggots manually. Chinese wolfberry aphids harm young buds, leaves and young fruits. It happens for many generations in a year. The harm is the most serious from late May to mid-July. Prevention and control measures: 2000 times of dimethoate emulsion, sprayed every 7 times every 10 days, 3 times in a row. Chinese wolfberry gall disease for more than one generation. In the middle and last ten days of April, the adults began to lay eggs, and then the larvae invaded the tissue, making the tissue deformed and turning into a blue-black nevoid gall. The new shoots were damaged the following year. Prevention and control measures: in the early stage of occurrence, spray with 40% dimethoate emulsion 1500mur2000 times. The adults and larvae of Lycium barbarum negative mud worm harm the young leaves, and when they are serious, the leaves can be completely eaten. There are three generations in a year, and the harm is the most serious from June to July. Prevention and control measures: from July to August, use 40% dimethoate EC 1500 mi 2000 times or 80% dichlorvos EC 1500 times, spray once every 7 mi 10 days, and spray 3 mi 5 times in succession. Lycium barbarum mildew spot mainly harms the leaves, the leaf front appears chlorotic macula, the edge is blurred, the corresponding leaf back appears dark mildew spot, its edge is not clear, several disease spots can be connected with synthetic plaques, or when mildew spots are densely spread, most of the back of the leaf is covered with mildew, and finally the leaf turns yellow or dry and cannot be eaten. Prevention and control methods: (1) foliar nutrition is sprayed regularly to make the plant grow early and quickly, which is helpful to reduce the disease. (2) in the early stage of the disease, 40% triadimefon carbendazim wettable powder 800 × 1000 times, or 50% triadimefon wettable powder 1000 times, or 30% copper oxychloride + 70% mancozeb (1 ∶ 1) 1000 times, or 40% chlorothalonil + 70% topiramate (1 ∶ 1) 1000 × 1500 times, 3 times 4 times, once every 7 days. Spray alternately, dense in front and sparse in later. Chinese wolfberry harvest method: harvest should be ripe and harvested at any time, pick and place lightly, touch less branches, and avoid fruit falling to the ground. The basket of Chinese wolfberry can only be filled with 20-30 cm thick, can not be squeezed, and washed in time with 3%-4% sodium carbonate aqueous solution. Soak the Chinese wolfberry fruit and spread it into a bamboo curtain with a width of 1.2 meters and a length of 2 meters, with a thickness of 1.5 cm and 2 cm. Pay attention to do not turn at this time, when it rains, it should be covered with plastic sheeting to prevent rain from falling on the fruit of Chinese wolfberry until it is dried in the sun to improve the value of the goods. After the Chinese wolfberry fruit is sun-dried, the impurities are removed and then graded and packaged. Click to get more Chinese wolfberry planting technology click to get more medicinal plant technology