The moisture content of the finished product is not high, but it is easy to mildew in summer.

I would like to ask you: the moisture content of the finished granule is not high, less than 12.5%, and there is no additional water, but it is very easy to get moldy in summer. What is the reason? How to solve it? Thank you all! Are the raw materials fresh? -- this moisture is also on the high side in summer, whether it is a certain raw material with high moisture content, such as secondary flour, wheat bran, etc., which is easy to deteriorate in summer. -- some raw materials are contaminated by mold.-- there are many reasons why the finished feed is moldy. During production, the hot material may be packed before it is cooled. The moldy characteristic of this material is mildew at both ends of the bag. In addition, the storage conditions are humid, and the finished products are easy to absorb moisture and mildew, especially the peak period of aquatic materials is in summer, and the humidity in the air is relatively high. If the storage time of feed exceeds the shelf life, mildew will easily occur. Therefore, it is necessary for the salesperson to communicate with the farmers about the storage conditions to avoid such unpleasant things. In addition, when loading, it is necessary to check whether there is stagnant water in the carriage, which usually occurs after the heavy rain. if this happens, it is necessary for the finished product warehouse tube to communicate with the cargo driver before loading. The best may be hot material. Once again, he was exposed to the sun.