How to solve the hardness problem of suckling pig feed?

Can you add a loosening agent?-how about adding corn to reduce the compression ratio? this problem can be solved by using Guangzhou Boshan Fat partner An and supporting services. Principle explanation: oil and water combine with water after emulsification through partner A, the amount of water increases, the granulation moisture of feed is increased, and the weight is increased. Emulsifier has hydrophilic and lipophilic bipolarity, bridging in the middle, leaving part of the water. Companion A use: 1) granulation (dry season) can be done according to 30kg oil, 1kg companion, 7-8kg water. Mix and put into the material. 2) Oil injection can be added to the premix, quenching and tempering (understood as: raw material stirring in hot steam environment before extruding) time is appropriately extended, in the quenching and tempering process, oil-water combination to achieve emulsification; 3) the latest research, powder according to 30kg oil, 1kg companion, 1.5kg water, can well achieve emulsification, but also prevent mildew. If you add water directly, first, it will run away when it is dry, and it will also be free after it is left, which is very easy to be used by mold. There is a drying process after granulation, and only bound water (including oil-emulsifier-water achieved through emulsifiers) can be left, as long as the quenching and tempering time is long enough to prevent mildew. But the powder should be very careful, do not add water, directly add emulsifier to the water, such as Sheung Shui up to no more than 1.5kg. After adding banA, the added water will be fixed (oil-with A-water), so that it can be left, but it can be safely left! Soft particles, animals love to eat, this is the role of partner A (save costs or do not increase costs, enhance the value of the product). Partner A value: per ton of adsorbed 5kg water, per ton of trough material to buy 6000, how much? Hey, how much is it with partner A? Attached experimental test results: (65 degrees bake for 24 hours) 1, do not add partner A moisture 4.16 (5.14) 2, add partner A plus water moisture: 5.4 (5.85) above are the R & D department's test results last week: see if the adsorbed water has increased after adding partner A. 1. 4.16 (5.14) 2 without partner A, 5.4 (5.85) 3 with partner A, 4.81 (6.53) with partner An and 4.81 (6.53) with partner A. Add partner A, can increase moisture! This is the moisture left after drying for 24 hours!