MySheen

The water heater does not wash out half a basin of scale for 3 years, and the electricity bill increases because of it

Published: 2024-11-22 Author: mysheen
Last Updated: 2024/11/22, Water heaters are used almost every day, especially in summer. I can't stand not taking a shower, but have you found that compared with when I first moved to a new home, the water heater is used, and the water flow is getting less and less.

We use the water heater almost every day, especially in summer, I really can't stand not taking a bath, but have you found that compared with when you first moved to a new house, the water heater flows less and less and the water heats more and more slowly? This is not to say, and then the water charges are still going up, it really doesn't make sense, ah, the user experience is getting worse, even more money, simply can not afford to be hurt.

In fact, the reason for all this is really very simple, that is, the "water heater" has not received care for too long! You take a bath by yourselves every day. Have you ever thought about bathing the water heater? The water heater has not been cleaned for too long, and the dirt in it can only get in and out, so the experience of using the natural water heater becomes worse! And the simple cleaning of the water heater is not challenging, we ordinary people can do it on their own!

When we clean the water heater, the first step must be to cut off the power, do not joke with their own lives! After cutting off the power, start to release water, this time may last more than an hour, depending on the capacity of your water heater.

two。 After draining the water, we can clean the inner tank. We connect a water pipe to the hot nozzle, and then pour water into it (you can add some cleaning material). After filling the water, let the water stay quietly for a while, and then open the cold nozzle to drain the dirty water. Repeat this several times until the water is clear.

3. At this time, we have finished washing, we have to start exhaust, turn off the hot and cold water outlets, and then turn on the water heater, and so on, when the hot water flows out, it means that the water heater is full of water, and our work is done.

 
0