The method and matters needing attention of cutting Propagation of Golden Bell upside down

The inverted Admiralty is a small evergreen shrub of the family Saliuraceae, which is cultivated all over the country. The flower color of the inverted Admiralty is bright and the florescence is long. It is a very popular potted flower. As the golden bell hanging upside down generally does not bear seeds, so use cutting methods for propagation, if you master the essentials, the survival rate of cutting can reach more than 95%.

Fuchsia

1. Cutting time: except for the dormant period in summer, the golden bell can be cut as long as the temperature is suitable, but it is better from November to the middle and first ten days of April of the following year. Because this period is the peak growing season of the plant, the cuttings with strong vitality can be selected, coupled with the cooler temperature, the cuttings should not rot, and the survival rate is higher.

2, the choice of cuttings: cuttings should choose the same year, not yet lignified branches, preferably with tender tips, the length of cuttings is generally 6 to 10 cm, the lower leaves should be cut off. It should be noted that when taking cuttings, you must use sterilized scissors to make the cuttings neat and smooth, and do not pinch the cuttings directly to the plant with your hands.

3. Preparation of cutting substrate and cutting bed: the cutting substrate should be screened with fine river sand, but it must be washed and sterilized with boiling water. The inserting bed can be used in a shallow basin or wooden box, and it should also be disinfected by spraying 0.1% potassium permanganate solution in advance.

4. Cutting method: when cutting, soak the cuttings in vitamin B12 for 20 minutes, insert a small hole in the sand with a thin bamboo stick, and then insert the cuttings into the sand hole with a depth of 3 to 4 centimeters, and the distance between cuttings should be kept at about 8 centimeters. In order to facilitate the basin after rooting. After the cuttage is finished, water it once and cover it with plastic sheeting to maintain the humidity of the bed.

5. Post-cutting management: the cutting bed should be placed indoors where there is astigmatism, and should not be exposed to sunlight directly. The room temperature should be kept at about 20 degrees Celsius, and only after a week can it receive some light. After cutting, you should often spray water into the bed, spray once a day in winter and once in the morning and evening in spring to keep the humidity in the bed above 80%. It usually takes root about 25 days in winter and 20 days in spring.

6. seedling pot: cuttage seedlings should be put on the basin in time after rooting, the basin soil should be disinfected without fertilizer, the basin and cultivated soil should be disinfected, and the basin bottom should be used to make drainage layer. When transplanting, you can use a small bamboo shovel to dig up the seedlings gently, put them into a small hole dug in advance in the basin, and bury the roots with soil after straightening. Do not press the soil by hand to avoid excessive force and damage to the roots and seedlings. After the seedlings are planted, they should be watered immediately to make the soil naturally dense, and then the pot should be placed in the shade for cultivation. If there is no wilting phenomenon in the leaves after three days, it can be exposed to light, and less liquid fertilizer will be applied a month later to enter normal management.

How to propagate, cuttage, sowing and propagation of Admiralty upside down

The upside-down Admiralty can be propagated by cutting, tissue culture and sowing. Below, the methods of cutting, sowing and tissue culture are described in detail.

How to propagate the Golden Bell upside down 1. Cutting Propagation method

The cutting time of upside-down Admiralty can be carried out in January, February and October every year, because the optimum temperature of upside-down Admiralty cutting is 15-20 ℃, about 20 days to take root.

Cutting method, first cut 5-8 cm long, branches must grow full tip for cuttings, temperature 20 ℃, the branches in the sand bed, and keep moist, twigs cuttings generally two weeks after rooting, branches on the pot in time, otherwise the root is easy to rot.

2. Sowing and propagation methods

The sowing time of upside-down Admiralty can be sowed in spring and autumn every year, and it can be sown and propagated by seed sowing. Generally, it can be sown in greenhouse with seedling tray. Under the temperature of 15-20 ℃, seeds germinate about 15 days after sowing, and then blossom in the second year of spring sowing.

3. Methods of tissue culture.

Hanging Admiralty upside down can be used for tissue culture, but this is not something that ordinary people can play well, but it requires equipment and technology, and we can only look at it. Admiralty tissue can be cultured and propagated with stem tip and tip young leaves as explants.

Detailed introduction of the methods and steps of Cuttage Propagation of Admiralty upside down

When it comes to hanging the golden bell upside down, I believe everyone will be familiar with it. Admiralty hanging upside down is a common herbal flower, which has high ornamental value and is loved by many flower friends. So, do you know the methods and steps of cutting propagation of hanging Admiralty upside down? Today, the editor will introduce the relevant knowledge to you in detail.

1. Cutting time

Except for the summer dormancy period, the golden bell can be cut as long as the temperature is suitable, but it is better from November of each year to the first ten days of April of the following year. Because this period is the peak growing season of the plant, the cuttings with strong vitality can be selected, coupled with the cooler temperature, the cuttings should not rot, and the survival rate is higher.

2. Selection of cuttings

Cuttings should choose branches that are not yet woody, preferably with tender tips, the length of cuttings is generally 6 to 10 cm, and the lower leaves should be cut off. It should be noted that when taking cuttings, you must use sterilized scissors to make the cuttings neat and smooth, and do not pinch the cuttings directly to the plant with your hands.

3. Preparation of cutting substrate and cutter.

The cutting substrate should be screened with fine river sand, but it must be washed and sterilized with boiling water. The inserting bed can be used in a shallow basin or wooden box, and it should also be disinfected by spraying 0.1% potassium permanganate solution in advance.

4. Cutting method

When cutting, soak the cuttings in vitamin B12 for 20 minutes, insert a small hole in the sand with a thin bamboo stick, and then insert the cuttings into the sand hole with a depth of 3 to 4 centimeters, and the distance between cuttings should be kept at about 8 centimeters. In order to facilitate the basin after rooting. After the cuttage is finished, water it once and cover it with plastic sheeting to maintain the humidity of the bed.

5. Plug-in management

After cutting, the cutter should be placed indoors where there is astigmatism, and should not be exposed to sunlight directly. The room temperature should be kept at about 20 degrees Celsius, and only after a week can it receive some light. After cutting, you should often spray water into the bed, spray once a day in winter and once in the morning and evening in spring to keep the humidity in the bed above 80%. It usually takes root about 25 days in winter and 20 days in spring.

6. Seedling pots

The cutting seedlings should be put on the pot in time after rooting, the basin soil should be disinfected without fertilizer, the basin and cultivated soil should be disinfected, and the basin bottom should be used to make the drainage layer. When transplanting, you can use a small bamboo shovel to dig up the seedlings gently, put them into a small hole dug in advance in the basin, and bury the roots with soil after straightening. Do not press the soil by hand to avoid excessive force and damage to the roots and seedlings. After the seedlings are planted, they should be watered immediately to make the soil naturally dense, and then the pot should be placed in the shade for cultivation. If there is no wilting phenomenon in the leaves after three days, it can be exposed to light, and less liquid fertilizer will be applied a month later to enter normal management.

This is all I know about hanging the Golden Bell upside down today. I hope it will be helpful for you to read this article. If you want to know more about the inverted Golden Bell, please continue to pay attention to the succulent flower bed. We will provide you with more related knowledge!