MySheen

Two propagation methods and matters needing attention of Milan flower

Published: 2024-11-22 Author: mysheen
Last Updated: 2024/11/22, Different from many flowers, the reproduction of Milan is best in the summer plum rain season. The habit of Milan is special. In the process of breeding, it likes the environment with high temperature and high humidity. At this time, breeding Milan is the easiest time to survive. In general, there are three ways to reproduce Milan flowers.

Different from many flowers, the reproduction of Milan is best in the summer plum rain season. The habit of Milan is special. In the process of breeding, it likes the environment with high temperature and high humidity. At this time, breeding Milan is the easiest time to survive. In general, there are three methods for the propagation of Milan flower, namely, striping method, high-pressure method and cutting method, among which cutting and high-pressure method are the main methods.

Milan flower

1. Cutting method

It is easy and easy to propagate Milan by cutting, and there are a large number of them. There are two cutting methods in Milan: one is the old wood cutting of the first year, the old wood cutting time can be carried out between April and May, and the other is the tender wood cutting of the same year, which can be carried out between June and July.

The selection of cuttings, whether it is the old branches of the other year or the twigs of the same year, should choose the branches with strong, substantial and good growth potential as cuttings.

Softwood cuttings are usually harvested from June to July every year. Select the branches that grew strongly in that year, cut them into about 10 cm long, cut off the leaves below, and leave 2 Mel 3 leaflets at the top. It is best to soak with vitamin B12 injection before insertion to promote rooting.

Cuttings use flowerpots as cuttings, vermiculite or river sand as cutting substrates, with a depth of 4ml 5 cm, compacted and watered thoroughly after cutting, and covered with plastic film, requiring high temperature and humidity, temperature 28m m / m 30C, and then spraying 2m m / d 3 times a day to keep the soil layer moist and rooting in 40-50 days.

2. High crimping method

The high pressure method should be carried out under the condition of high temperature and high humidity. The time of striping is generally between May and August, and the rainy season in early June is the best, with high survival rate and fast rooting. Because during this period, the environmental humidity is relatively high. Practice has proved that the high pressure from this period will take root one after another after 40 days, and if it is properly maintained in October, it can blossom twice. It is OK to start high pressure in July, but at this time it is the time of hot summer, when the sun is fierce, the water evaporates quickly, the environment is dry, the branches and leaves under high pressure are easy to scorch, and the roots heal more slowly. Therefore, after high pressure, it is necessary to put the potted mother Milan in a half-yin and half-sun or half-sun place, otherwise it is easy to scorch.

For the selection of high pressure parts, without affecting the shape of the whole mother plant, the sturdy branches that grow in alternate years and lignified should be selected, and the leaves should be removed and the ring peeling should be carried out at the length of 15ml / 25cm.

The high position crimping selects the sturdy, disease-free and pest-free branches that are semi-lignified in the current year, which is 0. More than 5cm, the lower part of the branching point is 7mur8cm circular peeling, wrapped in mud lump or wet vermiculite or moss, wrapped tightly with plastic film, watering, and often kept moist. After taking root after 3 months, the pot can be cut from the mother plant, and it is easy to bloom. The high position pressing bar can be divided into sleeve basin type and cladding type.

1, pot type: choose the sturdy branches that have been lignified in the year, put on the flowerpots with enlarged pots at the bottom of the pot, and make the flowerpots stable and fixed. Peel the Milan branches 1 cm wide on the Milan branches in the flowerpot, then fill them with soil and water them thoroughly, and water them every day after that, always keep the soil wet. Generally, it can take root in two months, cut off the mother plant and cultivate it separately.

2. Cladding type: select a strong annual Lignified branch and peel it in a ring about 10 cm away from the base of the branch, leaving 5 twigs in the upper part and cutting off all the lower side branches, using pre-prepared soil (mixed with fertile soil and moss drunken). Dry on the stove, then knead it with boiling water and cool thoroughly) wrap it in the peeling place, wrap it with plastic enzyme film, tie it tightly with thread, keep it from leaking in the lower part, and slightly loose in the upper part, so it is easy to inject water. The dressing part should be 10 cm long and 5 cm in diameter. In the future, water should be injected into the dressing place every day to keep it moist. It can take root in two months, cut off the mother plant and plant it separately.

Milan flower

For beginners with high pressure. Circular peeling is very important, peeling well, most of them can root and survive, otherwise they will not survive. The method of ring peeling is to cut two circles under P in the selected branch with a knife. 5 cm, do not hurt the xylem, and then cut off (or peel) the skin in the middle. But the cortex that should be peeled off must be peeled clean until the surrounding xylem appears and appears smooth. Only in this way can we heal and take root normally, otherwise it will be very difficult to survive.

The "fingernail peeling method" can also be used. After selecting the ring peeling site, the thumb nail is peeled down from top to bottom, peeling off the cortex around a height of about 1Mel 15cm. The requirements of this peeling method are the same as above. After the ring is peeled, wrap it around the ring with a prepared mass of mud (half a bowl of fertilizer, half a bowl of moss, dried on the stove, and then kneaded with boiling water), about 10 cm in length and 5 cm in diameter, wrapped with plastic film and fastened with thread to prevent leakage (the upper mouth should be capable of watering). If the high-pressure branch is flat and does not extend upward, pull it to the trunk with a rope, or set up another pillar to facilitate irrigation. Always keep moist, which is the key to survival. If one day you forget to irrigate, the soil in the plastic bag will dry and the new roots will die. It usually takes 2 months to take root. If there are not many new roots, you should wait. As long as the management is careful and does not dry up, it can always take root and survive.

To judge whether the high-pressure Milan takes root is to see whether the leaves of the high-pressure part are light yellow (not withered yellow) after high pressure. If they show light yellow, it means that they begin to heal. After a period of time, if you can see the white tender roots growing through the plastic bags, and gradually fill the bags, it is proved that not only the work is completed, but also grows well. At this time, you can cut off the plastic bags with sharp scissors, gently remove the plastic bags (do not break the mud lump), plant them in other pots, pour enough water and place them in a half-j weak half-yang or yin place. After 10 days or so, remove some of the yellow leaves and put them in a place where the sun shines. Soon after that, it will grow new leaves, send out buds and spit out fragrance.

The Culture method of Milan Flower matters needing attention in the Culture of Milan Flower

Milan can purify the air and is very suitable for growing in the living room. There are many breeding methods and precautions for Milan. If you want to grow high-quality Milan, you should know these points for attention.

Culture methods of Milan flower

Milan flower, a kind of scenic tree, has small leaves and flowers, usually yellow, and is a large-leaf variety of Milan. Making Yimilan is loved by everyone because when it blossoms, the flowers are very fragrant and evergreen, so it is also known as four Seasons Milan. Because its flowers are relatively small, it is also known as broken Milan. Most of them are planted in the husband's family.

Milan flower, native to southern Asia, mostly tropical, Corolla generally five pieces, round flowers, hermaphroditic plants, yellow flowers, fragrance, seeds, flowering period is generally summer in July and August. And Milan is a kind of edible flower, which can extract internal spices and make flavors. And as a green plant, Milan can absorb some harmful gases in the home, which is more practical.

In fact, Milan is a warm plant, like sunny places, as long as the sun is good, then the flowers look good, and fragrant. Due to the growth environment, not suitable for cold periods or zone growth, shade tolerance in general, prefer the sun. The most suitable temperature is about 23 ℃. No less than 10 degrees Celsius in winter.

How to grow Milan flowers

1. Milan likes a warm climate, so it is generally recommended to keep it in a greenhouse. You can keep it outside in summer, but you should pay attention to shade. Proper shade is OK. The general temperature is guaranteed to be about 25 degrees Celsius, and the hottest time in summer is properly watered to cool down. It must not be less than 10 degrees Celsius in winter, or you will get frostbite.

two。 Milan likes to be wet, so it needs timely watering, especially during the growing season, but remember that waterlogging should not occur, because too much watering will cause a series of problems such as yellowing leaves and rotting roots. Therefore, it is generally possible to water the leaves twice a day, and the leaves need to be properly watered in summer.

3. Milan is not very demanding for fertilizer, but because it blossoms many times a year, it causes a lack of nutrients, so it needs to apply a little fertilizer in time after flowering, not too much.

4. It is good for the soil to choose acidic soil, the corrosive substance is mainly rotten leaves, and you can also buy special fertilizers on the market.

When selecting potted Milan flowers, we should often turn over the soil to ensure the dredging of air and drainage, generally change the pot every 2 years, and fertilize the potted soil for 2 weeks when growing plants. Seedlings should not be exposed to the sun.

Points for attention in the Culture of Milan Flower

As long as Milan gives it the right temperature, it will be full of fragrance, and the fragrance of flowers is the most fragrant at this time of summer, and the most suitable temperature for flowering is 30 degrees Celsius. When breeding, pay attention to the temperature should be controlled at 25 degrees Celsius in order to produce beautiful and fragrant flowers normally.

Milan flowers need sunshine all the year round, and the best sunshine is 12 hours, so rice flowers had better be placed on the balcony or planted in the courtyard to ensure that the leaves are green and beautiful.

If Milan can not replenish fertilizer in a timely and reasonable manner, it will wilt. Because blooming many times a year will lead to insufficient nutrients, if there is a lack of fertilizer, then it will not blossom, or fall before it blossoms. Therefore, after flowering, we need to apply fertilizer in time to prepare for the next flowering. The growing period can be a little thicker, and the flowering period can also be increased appropriately.

Reasonable watering is necessary for its growth, if it is short of water, it will not grow up, but if there is too much water, it will rot the roots and yellow leaves. So it's recommended that you do it twice a day.

How to raise Milan flowers, breeding methods and matters needing attention of Milan flowers

How to raise Milan flowers? What are the breeding methods and matters needing attention of Milan flowers? Today we are going to talk about the cultivation techniques of Milan flowers. Milan flower alias tree orchid, four seasons Milan, is an evergreen shrub or small tree, its branchlets are often covered with star-shaped rust-colored scales. Milan is a favorite flower plant, and its flowers will smell good when they are in bloom.

Culture methods of Milan flower

Milan likes warm, humid and sunny environment, not cold-resistant, slightly shade-tolerant, the soil is the best in loose and fertile slightly acidic soil, and the winter temperature can not be lower than 10 degrees, growing in sparse forests or shrubs at low elevations all the year round.

Temperature: the temperature suitable for Milan to grow is 20 to 25 degrees, which is usually taken as the standard, and when the flowering time comes, if the temperature is kept at about 30 degrees, the flowers will have a strong fragrance.

Fertilization: Milan prefers fertilizers, but it is necessary to apply more liquid fertilizers that contain more phosphorus, and it is best to use crushed bones, fish bones, chicken bones and other fermented alum fertilizer, often supplemented with chemical fertilizers containing more phosphorus or fermented rice water.

Potted soil: pottery pots are generally used in aquaculture Milan, while the soil can choose loose, drained and well-ventilated soil, such as culture soil dominated by rotten leaf soil. If you change the basin, you can do it once a year or two, and you don't need to pay too much attention to the basin soil at other times.

Matters needing attention of Milan flower

Milan blossoms more often in a year, so after each blossom, we should fertilize 2 or 3 fully mature dilute liquid fertilizer in time, so that it can blossom continuously and have a strong aroma. Potted Milan seedlings pay attention to shade, avoid strong light exposure, wait for seedlings to grow new leaves, fertilize once every 2 weeks, but the amount of water must be controlled, should not be too wet. In addition to the midsummer noon shade, there should be more sunshine, so that Milan not only blossoms more times, but also has a rich fragrance.

The above are the breeding methods and precautions of Milan flower, in fact, Milan flower can also be used as an edible flower, can extract essence, such as Milan scented tea. In addition, Milan potted plants can be displayed in the living room, study and porch, fresh and elegant, comfortable. Milan is also an excellent scenic tree in the southern courtyard.

Extended reading:

How do you grow Milan flowers? Breeding methods and matters needing attention, fertilization methods, pest control

 
0