Three propagation methods of ivy

Ivy cultivation is not difficult, but also a very common tube wild plant, potted or used as a vertical greening are very suitable, many novice friends can successfully plant ivy. Some flower friends who like to do it themselves will want to breed their own ivy, so what are the breeding methods of ivy? What should I do?

Ivy (details)

I. seed propagation

Ivy seed reproduction, as long as it refers to fruit ripe harvest, stacking after ripening, soaking and kneading, ghost seeds washed and dry, can be sowed, can also block wet sand storage, the following spring sowing, sowing after sowing soil 1cm, cover grass moisturizing. The seedlings were unearthed and shaded in a shed, and large seedlings were cultivated after transplanting or fixing seedlings in the spring of the second year.

Second, pry propagation

The method of ivy pry propagation is to use twigs with air roots to survive most in the growing season, close with plastic film arch shed after insertion, and shade to keep the space temperature 80% Mel 90%, but the bed soil should not be too wet so as not to rot the cuttings. It will take about 30 days to take root.

3. Striping propagation

The practice of ivy striping propagation is carried out in spring and autumn, using wavy striping method, after the buried part is cut around, it is very easy to take root, which is a relatively simple propagation method.

Ivy is a more popular indoor foliage plant, which can not only decorate the home, but also benefit the purification and improvement of the household air. I hope that through the introduction of the editor, you can know how to breed ivy.

How to breed ivy, how to breed ivy

The leaf color and shape of ivy are varied, evergreen all the year round, is a beautiful climbing plant, can be used as scaffolding or wall vertical greening. It is also suitable for indoor pot culture, and it is also a very good indoor foliage plant. If you can put outdoor shade for a period of time in spring and autumn, so that you can see more sunshine in the morning and evening, then the vitality will be exuberant and the leaves will be green. Let's take a look at how to raise ivy.

How to raise Ivy (Daily Culture) 1. Ivy Culture: soil selection

Pot plants should choose loose, fertile and well-drained soil. One strand is made of 4 parts of rotten leaf soil, 3 parts of garden soil, 2 parts of river sand and 1 part of base fertilizer.

2. Ivy culture: fertilization should be reasonable.

During the peak growing season, thin cake fertilizer and water should be applied every half month or so, or 0.2% potassium dihydrogen phosphate can be sprayed on the leaves, which will make the leaves more beautiful. However, we should pay attention to the application of liquid fertilizer can not stain the leaves, so as not to cause the leaves to scorch.

3. Ivy culture: watering should be moderate.

Usually watering should not be too much, to see dry and wet, summer need to pour more water, and often spray water to the plant, improve air humidity, in order to facilitate growth. Watering should be controlled when the room temperature is low in winter, otherwise the roots are easy to rot. The climate in northern China is dry in winter, so it is best to spray and wash the branches and leaves with water close to room temperature every other time during overwintering to keep the leaves clean and green.

4. Ivy culture: proper amount of light

Ivy likes light, but it is also more shade-tolerant, so it can grow well under the condition of half-light. If you can choose an outdoor shade for a period of time in spring and autumn, let it see more sunshine in the morning and evening, then the growth is exuberant and the leaves are green. However, we should pay attention to avoid direct light, otherwise it is easy to cause sunburn, leaf edge and leaf tip scorch.

5. Ivy culture: the temperature should be suitable.

The suitable temperature for the growth of ivy is 20-25 ℃, which is not cold-resistant and afraid of heat, so we should pay attention to ventilation and cooling in summer when we put it indoors. In winter, the room temperature should be kept above 10 ℃, and the lowest should not be less than 5 ℃, otherwise it is vulnerable to freezing injury. When the new seedlings grow to a certain height, they should pick the heart in time to promote its germination of lateral branches and form a plump plant shape. The basin is usually changed in early spring every 2-3 years.

6. Ivy farming: pruning in time

Seedlings on the pot (preferably 3 plants per pot) to a certain height should pay attention to pick the heart in time, to promote its multi-branching, the plant shape appears plump.

7. Ivy culture: pest control

The common leaf spot disease of ivy can be controlled by spraying 200 times Bordeaux liquid.

If the indoor ventilation condition is poor, vulnerable to shell insects and red spiders, spray with 50% marathon 800 times solution and 40% dicofol 1000 times solution respectively.

Propagation methods of Ivy

Ivy propagates seeds, cuttings and strips.

1. Cutting method

The season of cutting is very wide, and can be carried out in spring, summer and autumn. Cut 20-30 cm long stem vines, pick the lower leaves, and then bury the basal 2-3 nodes in the soil, as long as you keep the soil moist, it will soon take root. You can also press the stem vine continuously, place the stem vine horizontally on the soil surface, press the soil on the joint with a clod, and then keep the soil moist, and the node will soon grow roots.

After rooting, it can be cut off from the internodes by 3-5 segments. After cutting, it will soon grow into a new stem, which can be planted when it grows to about 10 centimeters.

2. Seed propagation methods.

When the fruit is ripe, it is harvested, stacked and ripe, soaked and rubbed in water, and the ghost seeds are washed and dried, which can be sowed or stored in wet sand, sowed in the spring of the following year, covered with soil 1cm, covered with grass to moisturize and moisturize. The seedlings were unearthed and shaded in a shed, and large seedlings were cultivated after transplanting or fixing seedlings in the spring of the second year.

3. The method of striping propagation

In spring and autumn, the corrugated strip method is used to root easily after the ring cutting of the buried part.

Propagation methods of Ivy, four common propagation methods

Ivy is a popular indoor large potted plant with beautiful plant shape, which can purify indoor air, absorb benzene, formaldehyde and other harmful gases emitted by furniture and decoration, and bring great benefits to human health. Ivy also has good medicinal value: it can be used as a traditional Chinese medicine, which can clear away heat and remove fire, eliminate swollen pustules, and disinfect and sterilize. In addition, ivy also has a good cosmetic effect, can tighten the skin to eliminate edema. Which method of reproduction is the best for such a good plant?

Propagation methods of Ivy 1. Propagation methods of Ivy Seeds

Ivy can be sown and propagated in the south of the Yangtze River and South China. The ivy fruit is harvested when it is ripe, soaked in water, rubbed, washed and stored in the shade, and sowed in the spring of the following year. After sowing, it is covered with a thin layer of soil and covered with grass to moisturize. After the seedlings are unearthed and grow up, they can be transplanted and cultured.

2. Methods of cutting propagation of Ivy.

Ivy cuttage can be carried out in spring and autumn. The method is to cut the annual branches and cut them into segments 10-15 cm long for stable insertion, with leaves at the upper end. With the blade facing up, insert the sand bed about 5 cm deep, pay attention to shade, keep the bed moist, generally half a month to a month can take root. After taking root, it can be planted in the pot in early autumn or early summer. When transplanting, pay attention to let its roots carry soil, so that it is easy to survive.

3. The method of water insertion propagation of Ivy.

The water cutting of ivy branches is suitable for spring and autumn. First, select the semi-lignified vines on the top of the ivy, cut them off and remove the basal leaves, and then insert them directly into the water. Because ivy has the characteristics of growing air and rooting, they can quickly adapt to the hydroponic environment when they are inserted into clear water. Before the water insertion, you should pay attention to changing the water frequently, preferably every 1-2 days, so as to ensure that the water is clean and prevent the lower end of the branches from rotting. In about 10 days, white and tender roots can grow out, and after the new roots grow, you should also change water frequently. After about 2-3 weeks, foliage plant nutrient solution can be added to the water and maintained in a brightly lit place. After the step, the nutrient solution (water) should still be changed every 2 to 3 weeks.

4. the method of striping propagation of ivy

The practice of ivy striping propagation is carried out in spring and autumn, using wavy striping method, after the buried part is cut around, it is very easy to take root, which is a relatively simple propagation method. Or bury the stem vine in the person, or press the stem vine on the wet soil surface with stone, wait for its node to grow new root, press 3-5 section to truncate, promote the leaf axil to send out new stem vine. After another 30 days of culture, it can be transplanted into the pot.

Ivy is a more popular indoor foliage plant, which can not only decorate the home, but also benefit the purification and improvement of household air. This is the end of the introduction of ivy breeding methods. I hope you can choose the breeding methods you need.