Five tips for vertical gardening discarded bottles can grow a garden

In life, many people want their own garden or vegetable garden, but we don't have so much space. In this case, many people just give up, but some old gardeners choose another way to achieve it. It is to make some vertical vegetable gardens and gardens, or even use plastic bottles picked up.

The first kind: plastic bottle vertical vegetable garden

The following idea is very simple. After preparing some plastic pots with the same specifications, slowly stack them into a plastic pot vegetable garden.

You need to prepare enough large plastic bottles, preferably with a capacity of about two liters, some wire, scissors, drills and cutting tools.

The method of making it is also very simple. First of all, cut off the bottom of the bottle and drill several holes 5-10cm below the lid as drainage holes to avoid stagnant water in the soil.

After that, you can prepare some loose, fertile and well-drained sandy soil, which is filled with the whole plastic bottle and filled with small holes 2 to 3 centimeters apart from the opening end and drilled in with wire.

The next step is to cover the new plastic bottles directly in the pot container at the bottom. After stacking the plastic bottles one by one, you can lean them against the wall or railing and secure them to the fence with some wire.

The fixed plastic bottle can drill some large holes in the side to cultivate plant seedlings, and an empty bottle without soil can be placed at the top to store water.

The plastic bottle at the top is used to accumulate water, the plastic bottle at the bottom must be drilled, and the side of the bottle must be drilled to keep the soil well drained.

Finally, drill holes and plant seedlings, it is best to choose some vegetables with a relatively short growth period, as shown in the picture, directly use a sharp hand knife on the side of the plastic bottle to drill some larger openings.

After that, all kinds of vegetable seedlings can be planted, such as coriander, lettuce, basil, chives, mint and so on.

The second kind: fence vertical garden

The above idea is also very fascinating, is to make some cone-shaped vertical flowerpots on the fence, and finally plant some plants growing in vertical pots on the top, with some herbal flowers that are easy to grow, the ornamental is also good.

The first thing is to prepare enough materials to prepare common boards, wires, pliers and nails, and also to prepare some plastic sheeting for horticultural landscapes and seedlings of water moss.

First of all, some tapered containers are made of barbed wire. You can cut off the excess barbed wire with scissors and cut it into a cone, so that it looks like a triangular column, which is used to hang on the wall, or to prepare a few boards to separate the fence and the wooden frame.

Finally, the barbed wire is fixed on the board, and the bottom is pressed slightly, fixed on the board with nails or other hooks, and the top is fixed on a large piece of wood to make a conical, vertical situation is more difficult.

Then you can put some of the moss you get at the bottom of the conical barbed wire, or you can choose the artificial lawn directly, or even hang it in the air and turn it into a metal tower bonsai.

After being covered with a layer of water moss or other moss, wrap it with a layer of barbed wire so that the two cones are fixed together.

The third kind: making flower pagoda

Ordinary potted plants, as long as they are properly modified, also have a lot of room for improvement, and can even become charming flower towers.

Before making the flower tower, you need to prepare enough materials, such as an one-square-meter galvanized iron fence, and prepare some plant seedlings. The first is to make a cylinder suitable for plant growth on the galvanized barbed wire and make sure it is arranged in a square.

Prepare some tweezers to fix all the barbed wire on the edge of the cylinder. Be careful not to hurt your hand when cutting. The bottom cylinder is placed in the flowerpot, and the barbed wire of the cylinder should be inserted at least half the depth into the flowerpot.

After that, the plastic sheet of the cultivated landscape is wrapped in the edge of the cylindrical barbed wire, and the length is measured with a ruler before cutting, and then the landscape plastic sheet is completely wrapped in the whole barbed wire, and some space should be reserved at the top of the plastic sheet. wrap the whole barbed wire completely.

You need to make some holes in the barbed wire, and the plastic sheet can be completely fixed on the barbed wire and can be fixed with some wire.

After that, you can start to add cultivated soil. Now the cylindrical barbed wire net is watered with about 1 beat 3 of the soil, and then the soil is watered again. This is repeated many times, leaving a space of about 3 to 4 centimeters at the top, and then watering to keep the soil moist without stagnant water.

When finished, you can dig holes in the side of the barbed wire and cut some holes directly in the plastic sheet. the barbed wire needs to be cut with tweezers.

Finally, the seedlings of all kinds of flowers are planted on the cut openings, and some plants can also be planted on the top. after planting, they can be watered thoroughly and placed in a suitable position, and finally they will slowly grow into a vertical garden.

The fourth kind: vertical plank garden

You can make some vertical gardens on the yard or balcony, and you don't even need to prepare too many things. Just make some hooks on the wall and hang the potted plants on it.

You can prepare some wooden basins, or a wall that can be drilled. Prepare some potted plants that can be hung with hooks, some flowerpots with loose and drained patterns, and some iron wires to fix potted plants.

When you are ready, you can stand up the wooden tray, finally drill some holes in it, and hang the hook on the wooden tray.

After that, the flowerpot can be fixed on the wooden tray with iron wire to form a hanging effect.

Finally, add soil and cultivate all kinds of flowers to form fascinating vertical potted plants.

Fifth: vertical pot planting with water pipe

Some can also make vertical vegetable gardens with leftover PVC pipes, which is also very simple, but with enough water pipe elbows.

Prepare some boards to fix the PVC pipe, prepare some PVC pipe elbows, and prepare some drills to drill holes to maintain good drainage.

In order to improve the viewing, we will first paint the PVC pipes so that they have colorful colors.

After applying some glue to the opening of the pvc pipe, fix it to the board, or drill a hole directly into it, and then secure it with wire.

The bottom of the pipe must also be drilled to maintain good drainage. After the production is finished, the soil can be put into the PVC pipe, and finally all kinds of potted flowers can be planted.