A few boards with a thread, Yulu even burst ten heads, which could not be stopped!

Decapitation of fishing line

1. Prepare No. 3 fishing line, plastic sheet, sharp knife and carbendazim powder.

2, choose the head to be cut off, it is best to leave 1-2 layers of leaves on the base, insert the plastic plate between the head to be cut off and the base, and be sure to insert it tightly.

3. Wind the fishing line into the inside of the plastic board and tie a knot to make sure that the fishing line is wound to the deepest part of the leaf, otherwise it is easy to cause the chopped head to fall off.

4. After carefully examining each leaf, hold on to the succulent plant with one hand and tighten the fishing line with the other. With a little effort, the succulent head is cut off.

5. Cut the bad leaves of the wound with a knife, dispose of them, and wipe the tissue fluid out of the wound with a clean paper towel.

6. Sprinkle carbendazim powder on the wound and keep it in a ventilated and cool place for maintenance.

Why cut off your head?

Not all succulent plants need to be beheaded, because succulent plants have pathological changes, or grow too much, and in order to make one end of succulent plants more than one head. Of course, there is not only one way to behead.

Rotten root and black rot

Rotten root black rot is one of the most common succulent diseases. Today Huahua takes the "king of black rot", the jade butterfly, as an example to talk about how to behead after black rot.

1. Remove the black rotten succulent meat from the basin and cut off the rotten roots and black rotten stems with a sterilized knife, leaving only the head.

2. Examine the cut on the head, and if there is still black rot, continue to remove it until the wound is a healthy section.

3. Find a bottle with a diameter less than succulent, fill it with water, and put the cut on the bottle. Be careful not to let the succulent cut touch the water surface, preferably 2-3cm.

4. Put the glass bottle in a window with astigmatism and ventilation, and after about ten days, the hydroponic succulent plant will grow white roots.

5. Put the succulent plant back on the basin after rooting, the soil before can not be used, and the flowerpot should be disinfected.

The apprentice beheaded.

If the light is not enough, it is easy to cause succulent plants to grow and affect the ornamental of succulent plants, so they need to be beheaded.

1. After wiping and disinfecting the prepared knife with alcohol, cut off the succulent head and leave the corresponding height according to your own preference.

2. Smear the succulent incision with carbendazim powder and keep it in a cool and ventilated place.

3. Put the chopped head in a cool and ventilated place to dry for 2-3 days, then gently bury it in the soil, as long as the burial depth is to ensure that the succulent plant does not lodge, and then maintain it in an astigmatic environment.

4. After about ten days, the succulent head can grow new roots, and new small heads will grow on the long stem.

5, 4-5 months later, the small head on the overgrown stem grows.

Group beheadings

Many friends like to succulent many heads next to each other, a basin full of succulent. To achieve this shape from a succulent plant, beheading is the easiest way.

1. Using the fishing line method, cut off the head of the ice berry, coat the incision with carbendazim powder and put it in a cool and ventilated place.

2. After drying the chopped head for 2-3 days, put it in the original basin to take root.

3. After about ten days, the cut-off leaf core will produce a new head, and the stem under the leaf will also grow a new small head.

Have you learned the little knowledge of succulent beheading today?

This is the secret of Huahua.

If you have a better way to leave a message to share