"hit the wall 2.0 cutting method", you don't have to buy flowers anymore.

Wall impact 2.0 cutting method

Flower friends who are difficult to live by cutting should not miss it. Huahua will now take the rose as an example to tell you in detail how to use "bumping against the wall 2.0 cutting method"!

1. Prepare materials

Prepare some pure vermiculite, thick and fine, find a few clean disposable plastic cups, and finally find a shallow plate that can hold water.

2. Cut off the branches

Choose the semi-lignified branches after flowering, which contain more nutrients. Cut them into 6-8 cm long segments, keep 1-2 bud points in each segment, and put them in a cool and ventilated place to dry the wound.

3. Poke a small hole in the bottom of the disposable cup

Holding pliers in the right hand, holding a long nail with the pliers, burning red in the fire, holding the disposable cup in the left hand, poking 2-3 small holes in the bottom of the cup.

4. Soak vermiculite in carbendazim

After poking a small hole in the disposable cup, put the vermiculite into the cup, about 9 minutes full, soak the whole cup in carbendazim solution, so that it can be sterilized and taken out after soaking for 1 hour.

5. Soak the branches in carbendazim

Soak the dried rose branches in carbendazim solution, soak them for 30 minutes and then take them out and put them in a ventilated place to dry the water on the branches.

6. Insert the branch into the vermiculite

After the water on the branches is dried, insert it into the vermiculite of the disposable cup, then put it into a shallow dish, pour water into the shallow dish, and the water surface is 1-2 cm high. Let the vermiculite absorb water and keep it moist.

7. Put it outside

Put the cutting branches and shallow plates outdoors together, you can put them under scattered light, or you can put them in places with sunshine, such as the outdoor south balcony. When the sun is strong at noon, you should pay attention to shade.

8. Watering in time

When there is less water in the shallow dish, it is necessary to add water in time to maintain the height of the water surface at 1-2 cm, so as to keep vermiculite moist.

9. Heat preservation with plastic bags

When the temperature is 22-25 degrees, cutting branches are most likely to take root. If the temperature is not up to, you can find a transparent plastic bag to cover the rose branches to keep warm and moisturize. Remember that the plastic bag should poke two small holes.

10. Take root in about 15 days

After 15 days, the rose branches will bear white roots. It is best not to pull out the branches frequently to check the root growth, so as to prevent damage to the young roots.

After 11 or 1 month, the branches and leaves grow longer and denser.

Usually after waiting for a month, the new leaves on the branches will grow more and more.

12 or 1 month later, when the root system grows strong, it will be replanted.

When the root system is thick and dense and has grown to the bottom of the plastic cup, the branches can be transplanted into the soil, which can improve the survival rate of the pot.

13. Plant it in a pot

Mix rotten leaf soil, river sand and fermented chicken manure into a basin, then plant rose branches, pour them with water, first maintain them under scattered light for 7 days, and then move them to the sun.

14. Timely fertilization

Rose likes fertilizer, you can pour some fermented rice water or cake fertilizer every half a month to make the rose cry long and rub off the pot!

The 2.0 cutting method of hitting the wall is introduced here first.

Flower friends, don't just look.

Remember to give it a try after reading it!

If you think the method of Hua Hua is not bad.

Share it with your friends!