Turn the basin to check the root

Turn the basin to check the root

one. The short roots and bamboo joints are caused by insufficient watering. The reason is the lack of water caused by the long watering cycle when growing up.

two. There is only skin left in the root, which seems to be still alive, which is caused by planting dry plant material when transplanting and watering less times. Therefore, it can be prevented by pouring enough water into the plant material and basin to make it absorbed.

three. The root is strong and black at the end, which is due to excessive watering when the root is growing, resulting in respiratory disorders at the end of the root, or due to high fertilizer concentration.

four. The root clinging to the basin wall is caused by too little watering. In particular, the use of soil basins often occurs, so when watering, we should start from the edge of the basin to give enough water.

five. Brown and black spots on the roots are caused by too much watering or too high concentration of fertilizer, which can also be caused by the re-use of plants or too fine plants.

six. The blackening under the bulb is caused by too much watering or too little make-up soil, or too deep planting.

seven. The periodic downward trend of the bulb (bulb) is caused by underwatering or too thick plant material. It is more common in the soil basin which is easy to dry, but the plastic basin is rare.

eight. Bulbs do not take shape because of lack of ventilation and sunlight, or too deep, too fine make-up soil often occurs.

nine. The dryness and death of the bulb is caused by the excessive pressure on the transplant or ramet, which leads to the injury of the bulb, and the nematode eats the juice from the wound to empty it.

ten. The growth of seedlings is only in a column, which is caused by poor planting environment or poor training methods. In a word, it is caused by poor working conditions. Therefore, it is necessary to check whether the planting environment and training methods are appropriate.

eleven. The root exposed cosmetic soil surface is caused by the fact that the plant material is too fine or too heavy, so that the plant material touches the end of the root and cannot stretch normally. At this time, use a thicker plant material and adjust the amount of water.

twelve. The thinner and thinner the root is, the bottom layer uses coarse plant material, which is caused by poor water retention or insufficient watering, so that the plant material can not absorb enough water. When the plant material is too dry, give sufficient watering to make the plant material absorb enough water.

Http://www.koreanorchid.com/ko_xe/?mid=growingtip&page=2&document_srl=96870