On the design of mobile sunshade net

On the design of mobile sunshade net

The design can be considered from the following options:

1. Install a curtain controlled by electric remote control, the curtain cloth is replaced by sunshade net, the most advanced.

2. To install general manual curtains, you can use manual pulling wires to open or close in one place, and the sunshade net can replace the curtains.

3. Using the lifting device of the lifting clothes hanger, the lifting and shaking handle is installed in a convenient position, the switch of the sunshade net is controlled by the steel cable of the device, and the turning pulley is matched. What needs to be changed is to add a hard rod on the active side of the sunshade net. Used to fix the control cable, the cable should be fixed at the two ends of the rod, and the two ends of the moving direction of the rod should be equipped with a chute, which is semi-automatic.

4. in the local method, one side of the sunshade net is fixed, the other side is equipped with a hard rod, several steel wires are pulled along the opening and closing direction, and the sunshade net is on top of the steel wire, and the moving hard rod is opened and closed by the rod manually, which is economical and easy to install. This can also be fitted with a cable at the two ends of the moving rod and make a turn with a pulley.

If the range of the above sunshade net is wide, you should wear a circle every 30 centimeters on both sides, while wearing it on the edge of the sunshade net, and the circles are all placed on a fixed steel wire pulled along the opening and closing direction. if the net does not collapse, it will be folded.