Heaven-defying! One plastic bottle, there are 7 kinds of flower cultivation methods!

Flower cultivation method 1: cutting rose

Many flower friends respond to the difficulty of rose cutting, their hearts are broken, and they can't avoid black poles, no roots, rotten roots, and worry to death. Huahua specially learned the cutting method for a month from the old gardener downstairs. it is very simple, with a survival rate of 100%, and only needs a plastic bottle!

1. Pruning rose branches

Cut off a strong rose branch and cut it oblique to 45 degrees, about 8 cm in length.

2. The branches are inserted in a flowerpot or planted directly

Insert the branches into the soil, the depth is 2-3 cm, pour water, can be inserted in the flowerpot, if you want to plant, then insert directly to the place where you want to plant, so that there is no need to transplant.

3. Buckle the plastic bottle to the rose branch

Cut off the thinner part closer to the mouth of the bottle, accounting for about 1 beat 4 of the bottle body, and then buckle it to the branch, there is no need to poke a hole in the bottle body. Just take the plastic bottle away when watering and keep it fastened the rest of the time.

After 4 or 15 days, new leaves appeared on the branches.

Usually wait for 15 days, rose will be able to grow new leaves. But during this period, the soil must be kept moist. When the soil is dry, it should be watered in time. Take off the plastic bottle and water it again.

It's best to find a large bottle, or you'll touch the leaves every time.

5. Deduct it for another 10 days, and then take it off completely

After the new rose leaves grow, continue to buckle with plastic bottles for 10 days, and after 10 days, you can take off the plastic bottles completely! In this way, the survival rate of rose branches from cuttings is 100%, the leaves are green, and they are no longer afraid of black poles!

Flower cultivation Dafa 2: make a green radish column

A few plastic bottles can make a green radish column, which is super simple! The green pineapple grows more and more prosperous, the leaves are green and glowing, rub and climb 10 meters!

1. Cut off the bottom of the bottle and poke a hole in the bottle

Find a clean plastic bottle, try to find a relatively strong bottle, remove the cap, first cut off the bottom of the bottle, and then burn 20 uniform holes in the bottle with red-hot iron chopsticks.

2. The bottle stands in the basin

Put a pine needle on the bottom of the basin and stand the plastic bottle in the center of the basin.

3. Plant green pineapple

Fill the soil into the basin, fill the plastic bottle with pine bark or needles, make the bottle stand firmly in the basin, and then plant the green apple around and water it.

4. Put the second plastic bottle on the first bottle

Find the second plastic bottle, which is slightly larger than the diameter of the first bottle, or poke a hole in the bottle body, cut off the mouth and bottom of the bottle, and insert it into the first bottle mouth.

5. Add pine bark to the second bottle

Fill the second bottle with pine bark to make it stand firm, and then add a small amount of cake fertilizer.

6. Wrap palms

Wrap the mineral water bottle with palm skin, generally tie 2 layers, and then tie it with a few circles of rope.

7. you can continue to insert the bottle in the later stage.

Now the vines of this pot of green apple are still relatively short. Two plastic bottles are enough. When the green apple grows up, you can continue to insert the bottle and make the green radish column higher.

Flower cultivation 3: make a textured flowerpot

At the mention of plastic bottles as flowerpots, some flower friends will say ugly, that is, you did not choose the right bottle, if you choose some more textured beverage bottles, cut 2 times to become a beautiful flowerpot.

1. Find your favorite beverage bottle

Just like the following two bottles, this color is quite beautiful, and the bottle is also relatively strong.

2. Cut a knife and poke a hole in the bottle.

This beverage bottle is suitable for making a flowerpot horizontally, first cut a rectangular opening in the bottle body, and then poke several small holes in the side of the basin bottom to permeate water.

3. The edges are cut into teeth.

In order to make the flowerpot more beautiful, you can cut the edges into beautiful jagged teeth, which is more layered than when you don't cut it.

4. Plant flowers

Just plant the flowers. The bottles of this color look good with any kind of flowers.

Flower cultivation 4: automatic water-absorbing flowerpot

Sometimes when you go far away, you don't have time to water the flowers. You always worry that the flowers will die of drought. In fact, you can do it all with a plastic bottle! Let's see how self-absorbing flowerpots are made.

1. Pass the cotton thread through the bottle cap

Cut the plastic bottle into two parts, poke a hole in the bottle cap, let the cotton thread through, and plant the succulent plant on the part with the bottle cap. The other part of the bottle is filled with water, and the other end of the cotton thread is put inside to absorb water.

2. Insert the bottle cap into the bottom of the bottle

Insert the succulent part of the bottle into another part, so that the water at the bottom of the bottle will slowly seep into the soil through the cotton thread, keeping the soil moist, and the meat must grow well!

Flower cultivation Dafa 5: automatic flower watering artifact

In addition to automatic water-absorbing flowerpots, plastic bottles can also be used as automatic watering artifacts. No matter how far the door is, you are not afraid of the drought at home, which is very reassuring!

1. Make a small hole in the bottom and mouth of the bottle

Fill the plastic bottle with water, fill it for 8 minutes, screw the cap so as not to let the water leak, then make a small hole in the cap and bottom of the bottle, stick it with a needle, the hole is not too big, so that the water can flow out.

2. Insert the flowerpot upside down

Put the mouth of the bottle face down into the flowerpot, then insert the stick into the pot soil to support the plastic bottle. In this way, the water will slowly flow into the soil!

Flower cultivation 6: succulent watering artifact

Some meat is hairy, do not let the leaves stick to the water when watering, otherwise it is easy to rot, if only there is a sharp and thin watering artifact, only you have a plastic bottle, flowers guarantee that you can make it!

1. Paper tapered

Find a piece of paper and fold it into a cone.

2. Sticking tape

Stick the tape to the tapered paper, especially the tip, and stick it firmly to make it harder.

3. Burn the soft bottle cap with fire

Soften the bottle cap with a lighter, be careful not to light it, then insert the bottle cap with tapered paper and stretch the bottle cap long. After adjusting to the desired length and tilt angle, set it aside and let it cool thoroughly.

4. Pull out the tapered paper

After cooling, pull out the paper and cut off the tip of the bottle cap to make it permeable.

5. The flower watering artifact is ready.

Fill the bottle with water, screw the cap, and then water the succulent, you will not be afraid of water on the leaves!

Flower cultivation 7: high pressure propagation

Source: regular garden

Cutting is always unsuccessful flower friends, you can try high-pressure method, especially those cutting is not easy to root flowers, such as figs, grapes, woody hydrangea, etc., using high-pressure method will greatly improve the rooting rate!

1. Prepare tools

Prepare mineral water bottles, knives, scissors, tape, peat soil or water moss, etc.

2. Draw the ring stripping line with a pen

Choose a robust branch with a diameter of more than 0.5 cm. Draw the position of the ring peel with a black pen, and the distance between the two lines is about 1 cm.

3. Ring peeling branches

Peel off the bark with a knife until the white branches are exposed, gently and slowly.

4. Cut open the plastic bottle

Cut the plastic bottle, here is the bottom of the bottle, about 12 centimeters high, and then cut 1 knife from the side, cut a round hole at the bottom to allow the branches to pass through.

5. The bottle is covered with branches

Put the bottle on the ringed branch and stick the side cut with duct tape.

6. Pour the peat soil into the bottle

You can roll a paper tube and pour the peat soil into the bottle and mix it with water moss, which is more conducive to rooting. The soil can be covered 2 centimeters above the opening of the ring.

7. Winding iron wire

Tie the plastic bottle with wire and fasten the plastic bottle to the soil.

8. Watering

Water the plastic bottle thoroughly.

9. Tie the bottle mouth with a plastic bag

Find a plastic bag and tie it to the mouth of the bottle to keep warm, reduce water loss and keep the soil moist during rooting.

Take root after 10 or 1 month

About a month later, through the plastic bottle, you can see that a lot of roots have grown in the bottle. At this time, you can remove the plastic bottle and cut off the branches.

11. Transplant into a pot

After cutting off the branches, you can put it on the pot, and after going up the pot, you can cut off some leaves to make the flower pot faster.

There are so many wonderful uses of plastic bottles

Don't throw it away in the future

If you think what Huahua says is interesting and practical

Just share it with your friends.