After the crab claw longevity orchid blossoms, cut one knife to raise one pot and one pot to open as much as you want.

Recently, many flower friends said that the longevity crab claw orchid at home has finished a crop of flowers, and then it can only wait for next year to open again? Huahua wants to tell you: NO! Today, Huahua will teach you a little way to make your flowers blossom for the second and third crops. How many times you want to drive!

Cut 1 knife after the longevity flower, and burst the pot again in 1 month!

Flower cultivation Daquan

The longevity of many flower friends' families has basically failed. At this time, as long as you follow the flowers and learn to cut a knife, you will be able to sprout immediately and soon burst the pot again!

How to trim a failed longevity?

1. Usually, if you find that the color of the longevity flowers at home begins to turn black, and the flowers feel a little soft, and the flower stalks begin to droop, they basically need to be trimmed.

2. When pruning, use sterilized scissors to cut from the position of the 2 pairs of leaves under the flower. As shown in the following figure, just trim from a position below 2.

3. After pruning, the longevity flowers should be placed in a cool and ventilated place to dry the wound. After about a week, they will be transferred to the south balcony to receive sufficient sunshine. During this period, it is found that the surface of the basin soil is white and then watered to avoid rotting roots.

4. If you want longevity flowers to sprout new branches as soon as possible, you must add nitrogen fertilizer in time. You can bury 3-5 grains of compound fertilizer in flowerpots, or you can use self-made mature soybean fertilizer and soybean dregs fertilizer to make longevity flowers grow new branches so that they can blossom more.

5. Never lose the pruned branches, because the nutrients of the branches after flowering are very abundant. If you take them for cutting, the rooting rate will be very fast. It will take about 20 days for the cuttings to take root.

Cut a knife after the crab claw orchid, want to open a few times!

Flower cultivation Daquan

Some flower friends' crab claw orchids in their homes are no longer open only once, but other people's crab claw orchids can be opened 3-4 times a year. What's the matter? Of course, the post-flower pruning is done in place!

How to trim the failed crab claw orchid?

1. If you find your crab claw orchid, the flowers have begun to wilt to varying degrees, then quickly take a pair of scissors, click and prune, otherwise the flowers will stay on the leaves and consume unnecessary nutrients.

2. When pruning the residual flowers with scissors, cut off the 2-3 leaves under the residual flowers in the middle position, that is, cut off the 2 leaves from the residual flowers. If the leaves are long enough, you can cut more. Basically, only 6-8 leaves per branch will suffice.

Before pruning:

After trimming:

3. After pruning the residual flowers, cut short the branches and cut off all the old stems and dense stem nodes on the branches. After pruning, the new branches will be greener and stronger, thus making the flowers bloom more luxuriantly!

4. After the crab claw orchid blossoms, because it consumes a lot of nutrients, there is a short dormant period. At this time, we can take advantage of the dormant period to change the basin of the crab claw orchid, cut off the old root and weak root, and then put enough base fertilizer on the bottom of the pot. for example, bean cake fertilizer, bone meal fertilizer or self-retting bean dregs fertilizer is fine.

5. during the dormant period, the crab claw orchid was controlled by water and stopped fertilizing. after the new buds appeared on the stem node, the dilute liquid fertilizer was applied once every half a month, and the stem node should not be contaminated when applying fertilizer, so that the abnormal stem could grow rapidly. Spray 0.2% potassium dihydrogen phosphate solution after emerging the bud, and the crab claw orchid blossoms again soon!

6, do not lose the trimmed crab claw orchid leaves, prepare peat soil and perlite 2: 1 configuration of nutrient soil, the crab claw orchid leaves for cutting, almost 10-20 days can take root!

Cut a knife after the camellias, want to open a few times!

Flower cultivation Daquan

Because of the different varieties, some camellias are still blooming in their homes, while some camellias in their homes have basically failed and are ready to enter the growing period of spring shoots.

How to trim the failed camellias?

1. After the camellias bloom and fail at home, they must be pruned in time to avoid unnecessary nutrient consumption. After the camellias bloom and fail, the flower stalks will be left on the branches, and we need to prune the two leaves at the top of the flower stalks.

2. Cut off the two leaves at the top of the pedicel. If the top leaves are staggered, only one can be trimmed. Because the growth of camellias has the top advantage, the new shoots are pulled out from the top, so pruning can promote the growth of side branches of camellias, making more and more branches, thus blooming more and more.

3. After pruning the residual flowers, the branches are retracted and pruned, and the old branches, weak branches and parallel branches are cut off, so as to promote new branches and improve the vitality of camellias.

4. After the residual camellia flowers are pruned, compound fertilizer or bean dregs fertilizer mainly based on nitrogen fertilizer can be applied once before spring shoot germination to supplement enough nutrients for camellias to shoot. After the new buds germinate, foliar fertilizer can be sprayed once to make spring buds sprout with vitality.

5. When the spring shoot of camellia grows to 10-20cm, sprout the spring shoot, remove the top bud, leave 3-4 leaves, and let the side branches come out as soon as possible, so as to make the whole plant shape of camellia more beautiful.

6. Don't lose the cut camellia branches. After a little pruning, you can cut them directly into the soil. When the temperature is high in spring and the temperature and humidity are enough, it will take about 10 days for the cutting camellias to take root!

Cyclamen flower after cutting 1 knife, immediately open two stubble flowers!

Flower cultivation Daquan

The cyclamen in many flower friends' homes died directly after the Spring Festival, and then was directly thrown into the dustbin. In fact, after the cyclamen blossoms, as long as good care, compound flowers can be super simple!

How to trim the failed cyclamen?

1, after blooming cyclamen, be sure to cut off the remnants in time, generally starting from the bottom of the flower root, the whole flower stem will be cut off.

2. in addition to the residual flowers, all the withered branches and leaves should be removed. If you don't want to use scissors, you can just pull them off.

3. Cyclamen flowering consumes a lot of nutrients, so after pruning, nutrients must be replenished. You can bury 2-4 grains of compound fertilizer in the flowerpot, or you can pour some self-made liquid fertilizer so that the bulbs can accumulate nutrients.

4. The summer weather is hot, cyclamen will enter the dormant period, the leaves will continue to wither. At this time, stop water and fertilizer, put the flowerpot in a cool and ventilated place to maintain, so that it can spend the summer safely.

5. when the temperature drops in autumn, cyclamen will wake up from the dormant period and begin to sprout new buds and buds, so that the reflowering will be successful. It's just that cyclamen blossoms a little less than it did for the first time.

Cut a knife after the rose flower, open from spring to autumn!

Flower cultivation Daquan

Although many flower friends' roses are still growing buds, some flower friends told Hua Hua that in the south with high temperature, many of the first flowers of the rose are almost over, which really makes Hua Hua envy and hate!

How to trim the unsuccessful rose?

1. After the end of the rose spring flowers, the failed spring flowers must be cut off in time, so as to avoid nutrient consumption, so that the rose has enough nutrients to blossom for the second time.

2. When pruning, tilt 45 °from the top of the three leaves of the rose, about 0.5cm, and trim inward, so that the whole remnant flower can be cut off.

3. The blind branches and weak branches of the rose should also be cut off in time, and the buds and leaves that grow inward and downward should also be cut off at the same time, so as to promote the internal ventilation and light of the plant, enhance the disease resistance of the rose, and provide more nutrients to the flowering branches of the rose.

4. After the rose blossoms, if you want it to sprout and bloom for the second time as soon as possible, you must replenish the fertilizer in time. For example, the rotten rice water and compound fertilizer can all be used for the rose, about once every 10 days. After the rose emerges the bud, you can also pour some fishy water to make the rose bloom big and much!

5, pruned rose branches, cut into about 7-10cm segments, cut directly into the soil, or put in water, basically quickly take root!

About post-flowering pruning

Huahua, that's all for today.

Flower friends also want to know what kind of flower pruning.

Why don't you leave a message for Huahua below?