Cuttings, black rot, rotten roots, try this trick, the roots of the white flowers are roaring.

Some flower friends said that if the flower is not cut, it will be a lot less fun. Huahua agrees very much. Cutting is a very fulfilling thing, watching a section of twigs grow white roots, rub long burst pot, really happy to crazy! Today, Huahua has prepared several 100% survival cuttings for you. Come and have a look!

Green pineapple is so cut, if you don't live, you call me!

Huahua is going to teach you a super super simple green turnip cutting method today! All you need is a stem! The green pineapple raised by flowers is cut by itself, and the branches of the cuttings are picked up easily when visiting the flower market without spending a penny. Come and have a look!

1. The leaves are cut off and the branches are cut into small segments

When Huahua picked up the green radish branches, the leaves wilted a little, but the stem was still bright green. Huahua simply cut off all the leaves directly, and then cut the stem into segments, each section 3-4 cm long, with at least 1 node.

2. Prepare the cutting soil.

Green pineapple likes soft and clean soil. Huahua suggests that we first disinfect the river sand and rotten leaf soil, and then mix them together. We can add vermiculite to make the soil loose and breathable, which is more conducive to the roots of green pineapple.

3. Let the branches lie on the soil

After the branches have been cut, you can first put them in a cool and ventilated place to dry the wound, and then spread it horizontally to the surface of the basin soil. if there are aerial roots on the nodes, let the aerial roots touch the soil.

4. Pour water once to permeate

After the branches are laid, water once, the water should be watered thoroughly, and you can stop watering when you see the water flowing out of the drainage hole at the bottom of the basin.

5. Cover with transparent film for heat preservation and moisturizing

Now the temperature may be a little low in some places in the north, so cover the basin with a transparent plastic film, tie it with a rope along the edge of the basin, and pierce 2 small holes in the film to breathe. Move to a place with plenty of light indoors.

Take root in about 15 days

During the period of waiting for rooting and sprouting, pay attention to whether the soil is dry, water it in time and make the soil moist, but don't water too much, otherwise you will regret it in the rotten basin. Generally 15-30 days or so, will send out bright green and bright leaves, the root system has long been thick and white.

7. Transplant into a pot

When the new leaves grow up and the number of leaves grows to 3-5, the root system is also relatively strong and can be dug out and put on the pot. in order to reduce root damage, it can be transplanted with soil.

Gardenia is so cut, 100% alive!

Spring is coming, gardenia flower friends must be happy, not only can wait for flowers, but also cuttage, so that one pot into 10 pots. Is it difficult for gardenia cutting to take root? Try the amphibious cuttage method as soon as possible, absolutely rub to take root! It's hard to die together!

1. Cut off the branches of gardenia

Try not to choose too tender branches. 1-2-year-old woody branches are easier to survive. Cut the branches at an angle of 45 degrees, 10 cm each, and leave them in a ventilated place for 1-2 hours to let the wound dry and heal.

2. Plug the drainage hole of flowerpot

Light the candle, hold the candle backwards, let the melted wax drop to the drain hole, drop it for a while, seal the drain hole, feel that after it is completely sealed, you can pour in the water to detect whether it is leaking, do not leak! Then pour the water out.

3. Pour 3DB 5 soil into the basin.

Dig some garden soil in the green belt of the community, put it in the sun and sterilize it, and then put it into a flowerpot.

4. Lay another layer of river sand

First rinse the river sand with water, then spread it tiled and exposed in the sun, and then pour it into the flowerpot. The river sand accounts for 1 / 5 of the flowerpot, and there is no need to stir with the garden soil.

5. Pour water into the basin

Pour the water into the flowerpot, preferably along the edge of the pot, slowly, let the water soak the soil, and wait until the water surface is about 1 cm higher than the river sand.

6. Insert the branches into the soil

After the wound of the branch has dried, it can be inserted into the basin. Don't insert it too deep and let the branch stand smoothly. 3-4 branches in a flowerpot is enough, too dense is not conducive to late growth. If the drainage hole of the flowerpot is not tightly blocked, you can also use a plastic bottle.

7. Change water every week

Move the flowerpot under the scattered light, add fresh water in time, keep the surface of the water 1 cm above the soil, and pour out the water every 7 days and replace it with new water.

Take root in about 15-20 days

Wait 15-20 days later, gardenia will take root, if you use a flowerpot, directly poke the drainage hole from the bottom of the basin to open, let the water clean, put in a well-ventilated place. Wait until the soil is dry before watering. You don't have to worry about living anymore!

Chinese rose is so cut, it takes root very quickly!

Some flower friends like cuttings, but repeatedly defeated, 10 times there are 9 times black rot, people have no choice but to doubt life. How does rose cuttage have a high survival rate? Come and learn the vermiculite tray method of the great god, which can not only prevent black rot, but also make the root rub long, and 100% break the spell of "cutting must die"!

1. Branches are more likely to survive after flowering.

If you want to improve the survival rate, you can try to choose the branches after flowering, because the branches are relatively nutritious at this time.

2. Pruning branches

Wipe and disinfect the scissors with alcohol, cut off the branches of the one-year-old strong rose, cut off the section with flowers, and cut flat. Keep the following 2 sections, insert the cut into the soil to cut 45 °.

3. Soak in carbendazim

Soak the cut branches in carbendazim, which can be sterilized and disinfected. Take them out after 20 minutes and put them in a ventilated place to dry. Cuttings are always black flower friends, don't forget this step.

4. Dip in rooting powder

Dip the bottom cut of the rose branch in rooting powder or soak it in 10 times diluted sugar water to improve the rooting speed.

5. Choose cutting soil.

First put vermiculite or river sand in the sun to sterilize, and then pour into a transparent plastic bottle, the bottom of the bottle to poke several holes to drain and breathe.

6. Plastic bottles are placed on the tray

Find a tray, or a basin, and fill it with water, which is 3-5 cm high. Put on a plastic bottle containing soil to make it moist by absorbing water.

7. Insert the branches into the soil

First poke a few holes in the soil, and then bury the rose branches. Put under the scattered light, can not be directly exposed to the sun, oh, to prevent wilting. Usually do not need to pour water into the soil, see the tray water is gone, you have to add it.

Take root after 8, 15-20 days

After about 15-20 days, you can see the white roots in the transparent plastic bottle and grow tender green leaves. Let the roots continue to grow for a few more days, then cut the plastic bottle, take out the branches with the soil, and transplant them into a new flowerpot.

Cutting is very interesting.

Don't miss it again this spring!

Don't lose heart even if it's black rot and rotten stems.

Try a few more times and you will succeed!

If you think Huahua's cutting super method is useful.

Just share it with others.