MySheen

The flowerpot you bought is expensive and ugly? Huahua teaches you to make unique flowerpots, saving money and.

Published: 2024-11-08 Author: mysheen
Last Updated: 2024/11/08, After entering the pit of growing flowers, it is difficult to get out. There are too many flowers and plants at home, coupled with the advent of spring and the season of cutting, many flower friends often face the problem of insufficient flowerpots. Today, Huahua will share with you how to make a flowerpot, which is both economical and beautiful!

Waste class

There are often some small idle items in the home, but it is a pity to throw them away. If you don't throw them away, they will take up space in the home. Why don't you use it as a flowerpot?

Milk powder bucket

Production method:

1. Prepare a milk powder bucket, rope (can be replaced by hemp rope, etc.), double-sided glue, scissors, lighter, hot melt glue, cloth strips

2. Fill the can body with double-sided glue in turn

3. Winding the broken rope or hemp rope along the top and bottom of the bottle respectively, you can decide the winding width according to your preference, and leave a blank without winding in the middle.

4. Stick the prepared cloth strips to the blank with double-sided glue and your favorite trinkets on the cloth strips with hot melt glue.

5. Poke several holes in the bottom of the bottle with scissors (electric drill can be used if possible)

No poking holes can be used to arrange flowers.

Wood clip

Production method:

1. Prepare about ten wooden clips, a mineral water bottle, trinkets and glue

2. Cut off the bottom of the mineral water bottle, the height should be lower than the wood clip

3. Clip the wood clip on the bottom of the cut mineral water bottle in turn.

4. Glue your favorite trinkets to the wood clip

Your succulent plant has a new home.

Waste cloth

Production method:

1. Prepare beverage bottles or discarded barreled items, a piece of waste cloth, needle and thread, scissors

2. Cut the bottle from the middle down, leaving the bottom, and use scissors to make several holes in the bottom.

3. Wrap the cloth around the bottle, cut it to the right size, sew the joint, and put it on the bottle.

Flowerpots are cuter than flowers.

Wood and bamboo

Some friends who burn firewood at home often come across wood with better material and shape. Don't burn this kind of wood, it won't be wasted to make flowerpots!

Waste wood section

Production method:

1. Prepare a piece of waste wood, drill, paint

2. Put the wood section horizontally on the table and process the upward side.

3. Use a drill to drill a space on the wood section where you can put flowers and plants. The shape can be chosen according to your preference. Pay attention to drilling several holes through the wood section.

4. Paint the wood with paint to your favorite color

Put it on the desk, it's a feast for the eyes.

Waste wood or bamboo

Production method:

1. Prepare some waste boards, hammers and nails; if you use bamboo, you only need to prepare iron wire

2. Erect the plank into a circle or square, nail the two adjacent boards with nails; if it is bamboo, connect the two sides of the bamboo with iron wire to form a circle

Super suitable for flowerpots in courtyard plants

Interesting and creative category

Children often lose interest in toy cars for a while, which is really wasteful. But have you ever thought that a toy car can be transformed into a small flowerpot? There are many such objects, as long as you change your mind, you can harvest a creative flowerpot.

Toy car

Production method:

1. Prepare toy cars (there must be room for flowers and plants, fully enclosed ones are not suitable), electric drills

2. Drill several holes in the bottom of the toy car with an electric drill

Coconut

Production method:

1. Prepare a coconut, a saw and chopsticks

2. Draw a line at 1/3 of the coconut, saw it along the line with a saw, and remove the pulp.

3. Saw a hole in the bottom of the coconut and poke it open with chopsticks

Draw your favorite pattern on the surface of the coconut

Tile

Production method:

1. Prepare several tiles (this method is suitable for friends who have free land at home)

2. Insert the tiles into the soil and fix them in a semicircle with the wall.

So much for the sharing of Huahua today.

Do you have any homemade flowerpots you like?

If you have more creative ideas, you can leave a message below.

 
0