MySheen

After the longevity crab claw orchid blossoms, cut one knife to raise one pot and one pot to open as much as you want.

Published: 2024-09-19 Author: mysheen
Last Updated: 2024/09/19, Recently, many flower friends said that the longevity crab claw orchid at home has finished a crop of flowers, and then it can only wait for next year to open again? Huahua wants to tell you: NO! Today, Huahua will teach you a little way to make your flowers return.

Recently, many flower friends said that the long-lived crab claw orchid at home has finished blooming a crop of flowers. Can we wait for it to bloom again next year? Flowers tell you: NO! Today, Huahua will teach you a small method, so that your home flowers can also open two crops of flowers, three crops of flowers... want to open a few times!

Longevity flower after cutting 1 knife, 1 month and burst pot!

Flower cultivation

Many flower friends 'family longevity is basically defeated, at this time as long as follow the flower learn to cut a knife, immediately can sprout, soon re-burst pot!

How to trim the longevity of failure?

1. Usually, if you find that the color of the longevity flower at home begins to blacken, and the flower feels a little soft, when the flower stem begins to droop, it basically needs to be trimmed.

2. When pruning, use sterilized scissors to cut from the position of 2 pairs of leaves under the flower. As shown in the following figure, you can trim from the position below 2.

3. After pruning, put the longevity flower in a cool and ventilated place to dry the wound first. After about 1 week, transfer it to the south balcony to receive sufficient sunshine. During this period, it is found that the surface of the pot soil is white and then watered to avoid rotten roots.

4. If you want longevity flowers to sprout new branches as soon as possible, you must supplement nitrogen-containing fertilizer in time. You can bury 3-5 compound fertilizers in flower pots, or you can use self-made decomposed soybean fertilizer, bean dregs fertilizer, etc. to make longevity flowers grow new branches and bloom more.

5. Do not lose the trimmed branches, because the branches after flowering are particularly rich in nutrients. If they are used for cuttings, the rooting rate is very fast, and they can take root in about 20 days!

Crab claw orchid flower after cutting 1 knife, open a few times a few times!

Flower cultivation

Some flower friends home crab claw orchid, only open once no longer open, but others home crab claw orchid, a year can open 3-4 times, this is what? Of course, it was the post-flowering pruning that was done!

How to prune the opening and losing crab claw orchid?

1. If you flower friends find that your crab claw orchid and flowers have begun to wither to varying degrees, then quickly take a pair of scissors and clip them, otherwise the flowers will stay on the leaves and consume unnecessary nutrients.

2. When pruning the residual flowers with scissors, cut off the middle node of the 2-3 leaves under the residual flowers of the crab claw orchid, that is, cut off the 2 leaves counted from the residual flowers. If the leaves of the crab claw orchid are long enough, you can also cut more points. Basically, it is enough to leave only 6-8 leaves for each branch.

Before pruning:

After trimming:

3. After pruning the residual flowers, cut short the branches and cut off some old stems and over-dense stem nodes on the branches. After pruning, the new branches will grow greener and stronger, thus making the flowers more lush!

4. After flowering of crab claw orchid, because it consumes a lot of nutrients, there is a short dormant period. At this time, we can take advantage of the dormant period to change pots for crab claw orchid, cut off the old roots and weak roots, and then put enough base fertilizer on the bottom of the pot, such as bean cake fertilizer, bone meal fertilizer or self-made bean dregs fertilizer.

5. Control water for crab claw orchid during dormancy period, stop fertilizing, wait until new buds appear on stem nodes, apply thin liquid fertilizer once every half month, and do not contaminate stem nodes when fertilizing, so as to make abnormal stems grow rapidly. After the flower bud emerged, spray 0.2% potassium dihydrogen phosphate solution, and the crab claw orchid soon bloomed again!

6. Do not throw away the pruned leaves of crab claw orchid, prepare peat soil and pearlite 2:1 nutrient soil, cut the leaves of crab claw orchid, and take root in almost 10-20 days!

Cut the camellia flower after 1 knife, open a few times a few times!

Flower cultivation

Because of the different varieties, some flower friends home camellias are still blooming, there are also some flower friends home camellias, basically have been blooming, ready to enter the spring shoot growth period, at this time have to hurry to prune it!

How to prune the flowering camellias?

1. After the camellias at home are opened and defeated, they must be pruned in time to avoid unnecessary nutrient consumption. After flowering, camellia leaves pedicles on the branches. We need to prune after flowering, mainly pruning the top 2 leaves under the pedicles.

2. Cut off the two leaves at the top of the flower pedicle. If the top leaves are staggered, only one can be trimmed. Because camellia growth has the top advantage, new shoots are drawn from the top, so pruning, can promote camellia lateral growth, so that more and more branches, so that more and more flowers.

3. After the residual flowers are trimmed, the branches are retracted and pruned, and the old branches, weak branches, parallel branches, etc. are cut off, so as to promote new branches and improve the vitality of camellia.

4. After the residual flowers of Camellia are pruned, before the spring shoots sprout, compound fertilizer based on nitrogen or bean dregs fertilizer can be applied once to supplement enough nutrients for the flowering of Camellia. After the new buds sprout, spray foliar fertilizer once again to make the spring buds germinate.

5. When the spring shoots of Camellia grow to 10-20cm, wipe the buds on the spring shoots, remove the bud points at the top, leave 3-4 leaves, and let the lateral branches pull out as soon as possible, so as to make the whole plant type of Camellia better.

6, cut down the camellia branches do not lose, a little pruning, you can directly cut into the soil. Spring temperature is high, temperature humidity is enough, about 10 days time, can let the cuttings of camellia root!

Cyclamen flowers after cutting a knife, immediately open two crops of flowers!

Flower cultivation

Many flower friends 'cyclamen died directly after the Spring Festival, and then they were thrown directly into the trash can. In fact, after this cyclamen blooms, as long as it is well maintained, it is super simple to reflower!

How to prune a failed cyclamen?

1, the flowering cyclamen, must be timely cut off the residual flowers, generally from the bottom of the flower roots began to trim, the whole flower stem are cut down.

2. In addition to the residual flowers, all the dead branches and leaves should be removed. If you don't want to use scissors, you can pull them down directly.

3. Cyclamen blooms and consumes a lot of nutrients in the seed ball, so after pruning after flowering, nutrients must be supplemented. You can bury 2-4 compound fertilizers in the flowerpot, or pour some homemade liquid fertilizer, so that the seed ball can accumulate nutrients.

4, summer weather is hot, cyclamen will enter the dormant period, leaves continue to wither. At this time, stop water and fertilizer, put the flowerpot in a cool and ventilated place indoors for maintenance, so that it can spend the summer safely.

5, wait until the autumn temperature drops, cyclamen seed ball will wake up from the dormant period, begin to sprout, grow flower bud, so that the flower is successful. The only difference is that the multiple cyclamen blooms slightly less than the first time.

Rose cut after 1 knife, spring has been open to autumn!

Flower cultivation

Although many flower friends 'roses are still growing buds, some flower friends told Huahua that in the south where the temperature is high, many roses are almost finished blooming, which really makes Huahua jealous and hate!

How to prune the lost rose?

1. After the spring flower of rose is over, the spring flower that has failed must be cut off in time, so as to avoid nutrient consumption, so that the rose has enough nutrients to bloom for the second time immediately.

2. When pruning, incline 45° from the top of the three leaves of the rose, about 0.5cm, and trim obliquely inward, so that the remaining flowers can be cut off as a whole.

3. Blind branches and thin branches on the branches of rose should also be cut off in time, and those buds and leaves growing inward and downward should also be cut off at the same time, so as to promote internal ventilation and light of plants, enhance disease resistance of rose, and also provide more nutrients to flowering branches of rose.

4. After the rose blooms, if you want it to sprout for the second time as soon as possible, you must supplement fertilizer in time, such as decomposed rice washing water, compound fertilizer, etc., which can be used for the rose once every 10 days. After the rose buds emerge, you can also pour some fishy water to make the rose bloom bigger and more!

5. The pruned rose branches are shortened into small sections of about 7-10cm, directly inserted into the soil for cuttage, or placed in water for water insertion. Basically, they can take root very quickly!

About flower pruning,

That's all for Huahua today.

You also want to know what flower pruning,

Leave a message for Huahua below!

 
0