MySheen

Don't throw flowers that are dying, cut bald with a knife, and immediately burst pots without yellow leaves!

Published: 2024-12-22 Author: mysheen
Last Updated: 2024/12/22, Recently, many flower friends are asking Huahua a question, why is my flower not a large area of yellow leaves, is deciduous leaves, new leaves also do not grow a few? Don't worry, today Huahua will teach you a good way, take a pair of scissors, cut the yellow dying flower Ka Ka bald, immediately crazy long burst basin!

The dying green turnip cut a knife and turned into a green waterfall!

If all the branches and leaves of the green apple turn yellow, or all wilt, but the root system is not a big problem, then cut the green apple bald and send new leaves on it!

Procedure:

1. Find a pair of sharp scissors, stick to the position of the green radish flowerpot, leave only 1-2 bud spots on the green radish branch, and cut off all the rest, leaving nothing.

2. Put the shearing bald green apple in a place with good scattering light indoors, and usually pour water once after touching the pot soil is white. You can take a small spray can and spray water into the air around the green radish pot to achieve the purpose of heat preservation and moisturization.

3. If you want the green pineapple to produce new leaves as soon as possible, you can put a cling film on the flowerpot, or find a larger plastic bag and put the green pineapple with the flowerpot as a whole. The effect of heat preservation and moisturization is better.

4. In about 1-2 weeks, new buds will appear on the bald green radish branches. At this time, put the green pineapple into the living room or bedroom where the indoor scattered light is good, and pay attention to ensuring the humidity.

5. Under the condition of sufficient light, you can usually pour some fertilizer such as rice washing water and fish tank water on the green apple, and use it about once a week or two, which will make the green apple grow more prosperous and will soon burst again!

The dying gentleman's orchid cuts a knife, and the leaves are thick and greenish!

Once the gentleman orchid in the family is watered too much, the leaf core begins to rot, and if it is not dealt with in time, the rotten part of the leaf core will continue to expand, resulting in the whole gentleman orchid rotting away.

A gentleman's orchid only has a rotten heart, but what if the leaves don't rot?

1. If the magnolia just has a rotten heart and the leaves are not rotten, use a sterilized knife to dig out all the rotten parts in the center, then suck out the liquid with a cotton swab and fill it with chlorothalonil.

2, put the magnolia in a cool and ventilated place, pay attention to ensure that the basin soil is slightly dry, and ensure that there is enough scattered light in the room.

3. It only takes about a month to see two new little leaves grow out of the heartless department of the gentleman orchid. After that, as long as careful maintenance, add some sesame seeds and other fertilizer to the orchid, you can make the orchid grow more and more prosperous!

What if the gentleman orchid has a rotten heart and rotten leaves?

1. If the leaves and heart of the orchid are all rotten, cut off the rotten leaf and heart with a knife, that is, cut the bald head of the orchid.

2. After cutting the bald orchid, be sure to apply some carbendazim powder or potassium permanganate to the wound to prevent the incision from being infected and rotted again.

3. If there are conditions for flower friends, it is best to remove the orchid from the pot, cut off all the old roots, weak roots and rotten roots, and soak them in potassium permanganate solution for more than 20 minutes to achieve the purpose of sterilization and disinfection.

4. Choose the loose and breathable nutrient soil and put the magnolia back on the basin, which can be mixed with sawdust and sand to ensure the good water and air permeability of the basin soil.

5. if you leave the orchid in a cool and ventilated place, it will only take 1-2 months to see the new buds sprouting on the root system of the orchid.

6. At this time, you can start to fertilize the orchid. The waste oil of the range hood, peanuts and melon seeds and other oil crops can all be used by the orchid, which will soon turn the orchid into a group of orchids!

Yellow asparagus scissors 1 knife, green leaves!

Whether it is the lack of humidity at home, or contaminated by smoke, the performance of asparagus is one word: yellow! Once the leaves turn yellow, if you don't pay attention to it, the whole plant will turn yellow, and you can only cut bald at this time!

Procedure:

1. When pruning asparagus, do not cut the roots along the flowerpot, you can start pruning from about 5-7cm of the trunk of asparagus to retain more robust trunk, so that asparagus can send more side branches.

2, asparagus after shaving, can not be placed in direct sunlight, it is best to put in the indoor cool and ventilated scattered light, such as the north balcony or the ventilated living room.

3. When asparagus sprouts again, keep the air humidity high and the soil slightly moist, but do not accumulate water in the basin, otherwise the roots will rot if you can't breathe.

4. in the process of growing new leaves of asparagus, we can mix white sugar and warm water into a solution according to the ratio of 1: 100, and feed some white sugar water to asparagus. In about 2-3 months, asparagus will be able to wear its hair again!

The dying hanging orchid shears 1 knife and the blade is 2 fingers wide!

After a winter's destruction, did the family's orchids begin to wilt and droop their leaves, and even grow a lot of spots on some leaves? At this point we need a pair of big scissors to cut the orchid bald directly!

Procedure:

1. Find a pair of sharp scissors, cut a knife from the orchid up the 2cm along the root of the flowerpot, and cut off all the yellow and wilted leaves.

2. If you want the hanging orchid to grow vigorously, you can remove the pruned orchid head from the basin, trim the rotten root system a little, and wait for the wound to dry, then choose loose and breathable nutrient soil to re-basin.

3. After putting on the basin, put the hanging orchid head in a cool and ventilated place indoors, never direct the sun; touch the surface of the basin soil white before watering, do not let the basin stagnant water.

4. It only takes a month for the orchid to grow new leaves. At this time, burying a few boiled soybeans in the orchid pot or pouring some rice water can make the orchid grow and flourish, and the leaves become wider and wider!

The dying rich tree cut a knife and sprouted!

Recently, some flower friends asked backstage, Huahua, why the trunk of my family's rich tree became soft and came out of the water as soon as it was pinched? It must have rotted, so behead the rotten part quickly!

Procedure:

1. If the root system of the rich tree is not broken, but the branches are soft and rotten, find a sterilized saw and saw off all the rotten branches until there is no more rot on the branches.

2. Put the carbendazim solution in a spray can and spray it on the cut of the branch of the rich tree. Spray once at intervals of 7-8 hours. After spraying 2-3 times, put it in a cool and ventilated place to dry the wound.

3. Put the wealth tree in a cool and ventilated place, then find a lighted candle and drip wax continuously towards the cut of the wealth tree, which can not only prevent wound infection, but also prevent water from evaporating out of the trunk.

4. It only takes about a week to see new buds sprouting on the branches of the rich tree, and then you can maintain it normally!

5. Put the wealth tree in a place where the scattering light is good, such as the north balcony or the living room, and water it about 2-3 times a month. Usually, when you touch the basin soil and turn white, the bald wealth tree will soon burst again!

The dying copper coin grass shears 1 knife, the blade is big in the palm!

As soon as spring comes, the sun begins to be sufficient, and it is time for the copper grass to burst again. If the copper grass at home is wilting all winter, you might as well cut off your head directly and let it grow new leaves.

Procedure:

1. Find a pair of scissors and cut them with one knife along the place where the copper grass is flush with the flowerpot, leaving only 1-2cm on the root.

2. After cutting the bald grass, it will still be served by the sun. As long as the root system is not damaged, it will only take 3 days for the bald grass to sprout!

3. In about 7 days, there will be more and more leaves of Rabdosia angustifolia. At this time, you can mix the compound fertilizer in the water and water it directly to make it grow more prosperous.

4. It will only take 15-20 days for the bald copper grass to explode again!

Huahua, that's all for today.

Ladies and gentlemen, do you have any questions?

Welcome to leave a message for Huahua.

Huahua will certainly answer for you!

 
0