Rose triangle plum... As long as a plastic bottle, a big white root, a month.

Cutting rose in plastic bottles will take root in 7 days!

Before long, it's time for the rose to blossom. Take advantage of the spring to cut a few more pots, and the home will become a rose garden!

Procedure:

1. Find a clean plastic bottle, use scissors to cut a knife from the top part, be careful not to cut it all, leave a small part on one side.

2. Prepare the rose branches needed for cutting. pay attention to the branches that are stronger, so that they can survive more easily. The lower end of each branch is obliquely cut by 45 °, so that it is easier to take root.

3. Prepare a foam board and cut it into a circle smaller than the mouth of the plastic bottle, that is, the foam board can be taken out of the bottle at will. Then poke a small hole in the center of the foam board so that the rose branches can be inserted.

4. Add some water to the plastic bottle, then put the foam board with rose branches into the plastic bottle, arrange the rose leaves, let the leaves stretch as far as possible, and the water level in the plastic bottle should not exceed the leaves of rose branches as far as possible.

5. Find black tape and wrap the plastic bottle interface tightly around and seal it.

6. After that, put it indoors where the scattered light is good, slow down for 1 week, and then transfer to direct sunlight. It will only take 1 week to take root.

7. After rooting, pseudo-planting can be carried out first in order to ensure the survival rate. Prepare a disposable cup, first add a layer of perlite to the bottom, then add soil such as nutrient soil and cinder, and put the rose branches into it.

8. When the root system is a little longer, prepare loose and breathable nutritious soil, and put the rooted rose branches directly on the basin. Usually apply some compound fertilizer and potassium dihydrogen phosphate, which will soon make the rose grow up!

Plastic bottle cutting triangle plum, the root system is thick and strong!

As a northerner, Huahua sometimes really envies the south. After all, the triangular plum in the south can climb the wall if it wants to climb the wall, and it can even climb several meters high. It is really very beautiful!

Procedure:

1. Prepare robust triangular plum branches, preferably semi-lignified branches, with a length of about 10-15cm, leaving 2-3 leaves at the top, while the lowest end of the branch is obliquely cut 45 °with a sharp knife and soaked in rooting water.

2. Prepare the flower mud block, cut the flower mud block into small pieces that are 3cm in width and height, and then insert the triangular plum branches.

3. Put the triangular plum cuttings and flower mud blocks together into the tray, then find a clean plastic bottle cap, put it in a good indoor place with scattered light, and pay attention to moisturizing and breathable.

4. It only takes about one month to see the white root system passing through the flower mud block, indicating that the triangulated plum cuttage has taken root.

5. after taking root, put the triangular plum together with the flower mud in the basin, first put it in a cool and ventilated place to relax for a period of time, and then put it in the Nanyang light-lit place for normal maintenance, the triangular plum will soon grow up!

Plastic bottle cuttings succulent, one pot per minute into 100 pots!

It's time for succulent plants to grow again in spring. If you want to get many pots of succulent plants quickly, only leaves are left!

Procedure:

1. Roll off the leaves from the succulent mother plant and dry them in a place with good scattered light indoors to prevent the wound from being infected with black rot.

2. Prepare a clean plastic bottle. According to the size of the succulent leaves, use scissors and sharp knives to poke several small holes in the middle and upper parts of the plastic bottle. The hole is best made into an oval shape, while the lower part only pokes one hole to facilitate the addition of water.

3, first add water to the bottle, pay attention to the water level must not exceed the poked out of the inlet, then dry the succulent leaves of the wound into the plastic bottle, and then put it in a place where the scattering light is good, and find that the bottom water is reduced to add a little. Usually found that the leaves wilted can spray water.

4. The water in the plastic bottle will continue to evaporate and increase the humidity, thus promoting the succulent leaves to take root and sprout as soon as possible. When it is found that the succulent leaves of the cuttings take root and sprout, they can be transplanted into the potted soil.

5. When removing the rooting leaves from the plastic bottle, you must be careful to avoid harming the newly growing roots. If you are really worried, you can also choose to cut open the plastic bottle with scissors, add some water at the bottom, and the succulent leaves can be fixed directly with duct tape.

On the cutting of plastic bottles

So much for Huahua!

Flower friends also want to know which flowers are cut.

Leave a message for Huahua quickly!